MR2404FR

Shanghai Lunsure Electronic Technology Co.,Ltd Tel:0086-21-37185008 Fax:0086-21-57152769 Features • • • • • • Glass Passivated Die Low Forward Voltage Drop High Current Capability High Surge Current Low Leakage Anode To Tab Configuration MR2400FR  MR2410FR 24 Amp Rectifier 
 
 Maximum Ratings • • • ,  )-   ' "65°/150°  ) -   ' "65°/!.° Thermal Resistance Juncetion to Case (ROjc):0.8 °C /W 
%' 0 '   (0 7  8 ) 50V 100V 200V 400V 600V 800V 1000V
%'9 *() 8 ) 50V 100V 200V 400V 600V 800V 1000V  5'6  MR2400FR MR2401FR MR2402FR MR2404FR MR2406FR MR2408FR MR2410FR
%' 0
8 ) 35V 70V 140V 280V 420V 560V 700V Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC

Reverse Current At Rated DC Blocking Voltage Maximum Reverse Recovery Time Typical Junction Capacitance IF(AV) IFSM 24.0A 300A Tc =125°C 8.3ms, half sine DIMENSIONS INCHES M M                  VF 1.15V 25µA 1.0µA 100ns to. 250ns. 95pF IFM = 24.0A; Ta 25°C* = Tc = 25°C Tc = 100°C IF=0.5A, IR=1.0A, Irr=0.25A Measured at 1.0MHz, VR=4.0V IR Trr
  
      ! "  CJ                                                       *Pulse test: Pulse width 300 µsec, Duty cycle 1% www.cnelectr.com FR2400FR thru FR2410FR Figure 1 Typical Forward Characteristics 20 10 6 4 2 Amps 1 6 4 2 25°C 1 .5 .4 .2 .1 .6 .8 1.0 Volts Instantaneous Forward Current - Amperesversus Instantaneous Forward Voltage - Volts 1.2 1.4 1.6 0 5 Single Phase, Half Wave 60Hz Resistive or Inductive Load 0 25 50 75 °C Average Forward Rectified Current - Amperes ersus v Ambient Temperature - °C 100 125 150 15 Amps 10 25 30 Figure 2 Forward Derating Curve 20 Figure 3 Maximum Non-Repetitive Forward Surge Current 300 250 200 150 Amps 100 50 0

1 2 4 6 8 10 Cycles Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles 20 40 00 60 80 100 www.cnelectr.com FR2400FR thr FR2410FR Figure 4 Typical Reverse Characteristics 100 60 40 20 10 6 4 TA=100°C 2 µ Amps 1 .6 .4 .2 .1 .06 .04 .02 .01 2 4 80 80 Volts Instantaneous Reverse Leakage Current - MicroAmperes ersus v Percent Of Rated Peak Reverse Voltage - Volts 10 12 14 TA=25°C Reverse Recovery Time Characteristic And Test Circuit Diagram 50Ω 10Ω trr +0.5A 0 25Vdc Pulse Generator Note 2 -0.25

1Ω Oscilloscope Note 1 -1.0 1cm Set Time Base for 20/100ns/cm Notes: 1. Rise Time = 7ns max. Input impedance = 1 megohm, 22pF 2. Rise Time = 10ns max. Source impedance = 50 ohms 3. Resistors are non-inductive www.cnelectr.com