CHINA SEMICONDUCTOR CORPORATION
Spec. No. PS-LU-U32DYL4-A0R A Rev.
PRODUCT SPECIFICATION
CUSTOMER APPROVED SIGNATURES
APPROVED BY
CHINA SEMICONDUCTOR CORPORATION Address:2FL. NO.909,Chung-Cheng Road, Chung-Ho City Taipei Hsien,Taiwan. Tel:886-2-2223-9696 Fax:886-2-2223-9377
http://www.csctw.com.tw
: :
LED Type : LED Package : Emitting Color Viewing Angle Stopper
: : : :
Model No
CSPR-U32DYL4-A0R
Descriptions:
Superbright Lamp Piranha LED Lamp Yellow 90°
■ ■ ■ ■ ■
CHECKED BY
PREPARED BY
OPTO PLUS TECHNOLOGIES CO.,LTD Address:696 Shun jiang Rd.,Ji Shan St.Shaoxing, ZheJiang,China Tel:86-0575-88623888 Fax:86-0575-88623112
CHINA SEMICONDUCTOR CORPORATION
Spec. No. PS-LU-U32DYL4-A0R A Rev.
Features 1. High Current Operation 2. High Luminous Output 3. High Reliability and Solid Performance 4. Optimal Optical/Mechanical Design 5. Packaged in Tubes for Use with Automatic Pick and Place Equipment 6. Rohs Compliant
Device Selection Guide Chip
Package Outline Dimensions -
:
:
:
Tolerance
: : : :
Model No
CSPR-U32DYL4-A0R
*
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Part No.
Material
CSPR-U32DYL4-A0R
LED Lens Emitted Color Yellow Water Transparent
AlInGaP
± 0.25
0.01
Unit
±
inch mm
http://www.csctw.com.tw
Page
1/5
CHINA SEMICONDUCTOR CORPORATION
Spec. No. PS-LU-U32DYL4-A0R Rev. A
Absolute Maximum Rating -
Parameter
Power Dissipation Forward Current (DC) Peak Forward Current * Reverse Voltage Operating Temp. Storage Temp.
Symbol Pd IF IFP VR Topr Tstg Tsol
1/10
Rating 196 70 100 5 -30 ~ +80 -40 ~ +100
Unit mW mA mA V
Lead Soldering Temperature
Max. 260 for 5 sec Max. (3mm from the epoxy bulb)
Electro-optical Characteristics -
Parameter
Forward Voltage Luminous Intensity Luminous Flux
Dominant Wavelength
Symbol VF IV Φv d
Min. ----1400 600 -----------------
Typ. 2.3 2500 1800 590 597 90 -----
Max. 2.8 ---------------------100
Unit V mcd mlm
Condition
IF=70mA nm nm deg A VR=5V
Peak Wavelength Viewing Angle Reverse Current
λp 1/2
:
http://www.csctw.com.tw
μ
θ θ θ θ
2
IR
Page
℃
≦
λ λ λ λ
≦
* Pulse width
0.1 msec. duty
℃
℃ ℃
℃ ℃ ℃ ℃
: : : :
Model No
CSPR-U32DYL4-A0R
■ ■ ■ ■ ■ ■ ■ ■
(Ta=25
)
(Ta=25
)
2/5
CHINA SEMICONDUCTOR CORPORATION Luminous Flux Rank Limits ( IF = 70mA ) unit mlm
Part No.CSPR-U32DYL4-A0R Code
Spec. No. PS-LU-U32DYL4-A0R A Rev.
A B C D E
min. 600 1000 1500 2000 2500
Dominant Wavelength Rank Limits ( IF = 70mA )
Part No. CSPR-U32DYL4-A0R Code min. max.
Y3 Y4 Y5
589.5 592 594.5
592 594.5 597
Forward Voltage Rank Limits ( IF = 70mA ) unit v
Part No. CSPR-U32DYL4-A0R Code
min. 1.8 2.0 2.2 2.4 2.6
max. 2.0 2.2 2.4 2.6 2.8
C D E F G
Notes:
:
http://www.csctw.com.tw
%
1. 2. 3. 4. 5. 6. 7.
Tolerance of measurement of luminous Flux :±15 Tolerance of measurement of dominant wavelength :±2nm Tolerance of measurement of forward voltage :±0.05v All data are measured by CSC's test equipment. One delivery will include several color rank, VF rank and Iv ranks of the products. The quantity-ratio of the ranks is decided by CSC. Please confirm with CSC salesman,if your request different form standard specification.
:
:
unit
:
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
max. 1000 1500 2000 2500 3000
nm
Page
3/5
CHINA SEMICONDUCTOR CORPORATION
Spec. No. PS-LU-U32DYL4-A0R Rev. A
Typical Electrical / Optical Charateristics Curves -
Relative Intensity @ 20mA
1.0
0.5
0
550
Fig 5. Relative Intensity Vs. Wavelength
:
℃ ℃ ℃ ℃
(Ta = 25
: : : :
Model No
CSPR-U32DYL4-A0R
■ ■ ■ ■
Unless Otherwise Noted)
600
650
700
Wavelength (nm)
Fig 6. Relative Luminous Intensity vs.Radiation Angle
http://www.csctw.com.tw
Page
4/5
CHINA SEMICONDUCTOR CORPORATION
Spec. No. PS-LU-U32DYL4-A0R A Rev.
Precautions For Use 1. Recommended Soldering conditions Wave Soldering
Temperature(°C)
, and temperature should be controllable. Surface temperature of the device should
3. Static Electricity a. Static electricity or surge voltage damages LEDs.. It is recommended that a wrist band or an anit-electrostatic glove be used when handling the LEDs. b. All devices, equipment and machinery must be properly grounded. It is recommended that mesures be taken against surge voltage to the equipment that mounts the LEDs.
Note: The specifications are subject to change without notice. Please contact us for updated information.
:
℃
be under 230
.
→℃
be shorter (+10
-1sec.). Power dissipation of iron should be smaller than 15W
http://www.csctw.com.tw
℃
≦
: : : :
Model No
CSPR-U32DYL4-A0R
■ ■ ■ ■
260(max.) 250 240 Preheat 105(max.)
0
Max. 60sec. Time(sec.)
5 sec.
2. Soldering Iron Basic SPEC. is 5sec. When 260 . If temperature is higher, time should
Page
5/5
很抱歉,暂时无法提供与“CSPR-U32DYL4-A0R”相匹配的价格&库存,您可以联系我们找货
免费人工找货