CCM01

smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 7 CCM01 Series Features • Card detection switch • Compatible with lead free THT soldering • Chamfered opening in the card entry slot improves the card guidance Typical Applications • Consumer • Set-top box • Pay TV Mechanical Number of Contacts Mechanical life Card insertion force Card extraction force Contact force 8 See table See table 1 N min / 10 N max 0,2N / 0,50 N max Contact Electrical Data Insulation resistance Resistance Current rating Dielectric strength 1,000 MΩ min 100 mΩ max 10 µA min / 1 A max 750 Vrms min Switch Electrical Data Packaging Tray 30 parts / Cartons 300 parts Card detection switch Contact resistance Dielectric strength Current rating Maximum power Normally closed 100 mΩ max 250 Vrms min 1 mA min / 10 mA max 0,2 VA Soldering Compatible with lead free THT soldering process Environmental Data Operating temperature Damp heat Salt mist RoHS compliant -20°C to +70°C IEC 512 test number 11c (10 days) IEC 512 test number 11f (96 hours) Designation CCM01-6202MLFT CCM01-6101LFT Termination THT THT Contact Plating gold gold Height (mm) 6,75 3,9 Operating Life 10,000 cycles 30,000 cycles Operating Temperature -20˚C/+70˚C -20˚C/+70˚C Card Insertion Force 10N 10N Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 7 Full Size smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 8 CCM01 Series CCM01-6202M LFT 61,1±0,2 54,2 +0,2 0 Card entry Embossed Channel 10,65 0,9±0,05 Card entry Full Size (6,75) 25˚ 1,6 PCB Thickness 4 Snap feet 10x 0,6 A B 29 A 3x 2,54 0,7 3,81 22,12 1,6 PCB Thickness 4,2 6,75 (50,3) (40) 29 2 metal clips 2,9±0,3 3,9 5,9±0,2 Designation & Date-Code area (Year-Day range in the year) Card stop A 10,4 Card stop A-A 40±0,2 X-XXX 36,4±0,2 6202T 20 A RECOMMENDED PC BOARD LAYOUT (Component side) 29,74 27,2 24,66 22,12 Plastic outline 58 18,31 0 AB ø 3,1 10 19,05 16,51 10 C8 C7C6 C5 SW Card end travel C4 C3C2 C1 SW switch terminals 0 10 Soldering areas for metallic clips (ø 5,6) Contact location according to ISO/IEC 7816-2 +0,1 10x ø 10 ø 0,1 4x ø 0,1 +0,1 ø 3,2 0 Dimensions are shown in mm Specifications and dimensions subject to change (3,81) (3,81) 4x 0,4 3,7±0,2 Card entry 8 4 0,75±0,25 11,75±0,25 19,37±0,25 15,4±0,2 18,85 16,51 B 10 www.ck-components.com (58) smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 9 CCM01 Series CCM01-6101 LFT 61,1±0,2 54,2 +0,2 0 Card entry Embossed Channel 0,9±0,05 Card entry 3,9 6,8 (3,9) 4 Snap feet 1,6 PCB Thickness 22,12 10x 0,6 AB 29 A 0,7 29 (50,3) A-A Designation & Date-Code area (Year-Day range in the year) Card stop 5,9±0,2 A 2,9±0,3 Card stop (40) 3x 2,54 2,54 36,4±0,2 6101T X-XXX 40±0,2 19,05 20 AB ø 3,1 A Pick and place area ø 8 RECOMMENDED PC BOARD LAYOUT (Component side) 24,66 29,74 33,55 Plastic outline 22,12 27,2 19,05 16,51 10 C1 C2 C3 C4 SW SW Card end travel switch terminals 0 10 19,05 C5 C6 C7 C8 ø10 +0,1 Contact location according to ISO/IEC 7816-2 10x ø 0,1 (3,81) (3,81) 4x ø 0,1 58 0 ø 3,2 +0,1 0 4x 0,4 10 3,7±0,2 Card entry Dimensions are shown in mm Specifications and dimensions subject to change 4 www.ck-components.com 9 11,75±0,25 19,37±0,25 B 0,75±0,25 15,4±0,2 19,05 10 (58) 25˚ 3,81 Full Size 6101T X-XXX 4,2