LP221T203DQ

LP Series Miniature Snap-in Slide Switches Features/Benefits • 6 to 11 AMPS available • Easy assembly—Snap-in mounting • Contamination resistant—extended actuator • Positive detent • RoHS compliant Typical Applications • Small appliances • Outdoor appliances • Portable tools Models Available Specifications CONTACT RATING: Q contact material (LP0X, LP2X Models: 6 AMPS @ 125 V AC or 28 V DC; 3 AMPS @ 250 V AC (UL/CSA). (LP7X, LP8X Models): 11 AMPS @ 125/250 V AC (UL/CSA). See page I-27 for additional ratings. ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. OPERATING TEMPERATURE: -30ºC to +65ºC STORAGE TEMPERATURE: -30ºC to +85ºC NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials HOUSING: 6/6 nylon (UL94V-2), black. ACTUATOR: Glass filled acetal, UV and petroleum resistant, black. CONTACTS: Q contact material: Copper, silver plated. See page I-27 for additional contact materials. TERMINALS: Q contact material: Copper, silver plated. See page I-27 for additional contact materials. CONTACT SPRING: Music wire or stainless steel. TERMINAL SEAL: Epoxy. I Slide Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages I–26 and I–27. For additional options not shown in catalog, consult Customer Service Center. Switch Function LP22 DPDT, 6 AMP LP02 SPDT, 6 AMP LP81 DPST, 11 AMP LP82 DPDT, 11 AMP Actuator C2 Black cap C1 Whitecap C3 Red cap Detent 1 With detent Mounting Style T2 Snap-in panel with tabs (D, L, N markings only) Terminations 03 Solder lug with hole Housing Markings NONE No markings D ON-OFF Contact Material Q Silver B Gold Dimensions are shown: Inches (mm) Specifications and dimensions subject to change I–25 www.ck-components.com LP Series Miniature Snap-in Slide Switches SWITCH FUNCTION NO. POLES SP MODEL NO. AMP RATING* 6 SWITCH FUNCTION SPDT SCHEMATIC NO. POLES MODEL NO. AMP RATING* SWITCH FUNCTION SCHEMATIC LP02 LP22 6 DPDT LP81 DP All models with all options when ordered with ‘Q’ contact material. 11 DPST I Slide Contacts make on side actuator thrown. * For complete contact ratings, see CONTACT MATERIALS Section, page I-27. LP82 11 DPDT Terminal Nos. For Reference Only Part number shown: LP22C21S203Q ACTUATOR C1; C2; C3 OPTION CODE2 ACTUATOR CAP COLOR BLACK WHITE RED NOTE: Actuator finish: gloss. Other colors available, consult Customer Service Center. C2 C1 C3 DETENT 1 WITH DETENT MOUNTING STYLE T2 SNAP-IN PANEL WITH TABS PANEL MOUNTING DIM. ‘A’ PANEL THICKNESS .030–.045 (0,76) (1,14) .046–.059 (1,17) (1,50) .060–.089 (1,52) (2,26) Mounting style T2 suitable for markings. See HOUSING MARKINGS options. .090–.120 (2,29) (3,05) DIM ‘A’ .578 (14,68) .585 (14,86) .598 (15,19) .610 (15,49) Dimensions are shown: Inch (mm) Specifications and dimensions subject to change I–26 www.ck-components.com LP Series Miniature Snap-in Slide Switches TERMINATIONS 03 SOLDER LUG WITH HOLE HOUSING MARKINGS NONE NO MARKINGS D I ON-OFF Slide NOTE: Housing markings are available with ‘T2’ mounting style only. The marking color on all housings with marking options ‘D’ is white, standard. Other marking colors are available, consult Customer Service Center. Orientation of actuator and terminals. CONTACT MATERIAL OPTION CODE CONTACT MATERIAL RATINGS Q SILVER 2 POWER LP0X, LP2X MODELS: 6 AMPS @ 125 V AC or 28 V DC; 3 AMPS @ 250 V AC (UL/CSA). LP7X, LP8X MODELS: 11 AMPS @ 125/250 V AC (UL/CSA). B GOLD 1 LOW LEVEL/DRY CIRCUIT 0.4 VA MAX. @20 V AC OR DC MAX. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 2 3 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate. NOTE: Any models supplied with Q or B contact material are RoHS compliant. All models with all when ordered with ‘Q’ contact material. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change I–27 www.ck-components.com