CLE110F

CLE110F Gallium Arsenide IRED Flat Lead PLCC Package ® Clairex Technologies, Inc.  April, 2003 ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) features • Flat lead PLCC package • ± 5° emission angle • 940 nm peak wavelength • Collimating plastic lens • Available with flat window description The CLE110F infrared emitting notes: diode features current GaAs/AlGaAs 1. 0.06” (1.5mm) from case for 5 seconds maximum. technology for increased quantum 2. Derate linearly 0.32mA/°C from 25°C free air temperature to TA = +100°C. efficiency. The chip is mounted in a 3. Derate linearly 0.80mW/°C from 25°C free air temperature to TA = +100°C. compact, embedded leadframe package with flying lead configuration. The plastic lens provides a narrow emission pattern. Contact Clairex for alternative wavelength emitter chips, different lens and lead configurations. absolute maximum ratings (TA = 25°C unless otherwise stated) storage temperature ...................................................................... -40°C to +125°C operating temperature ................................................................... -40°C to +100°C lead soldering temperature(1) ..........................................................................260°C continuous forward current(2) .......................................................................... 30mA peak forward current (1.0ms pulse width, 10% duty cycle).................................. 1A reverse voltage .................................................................................................... 5V continuous power dissipation(3) ...................................................................... 75mW electrical characteristics (TA = 25°C unless otherwise noted) symbol PO VF IR λp BW θHP tr, tf parameter Total power output Forward voltage Reverse current Peak emission wavelength Spectral bandwidth at half power points Emission angle at half power points Radiation rise and fall time min 2.0 typ 2.5 940 50 10 700 max 1.5 10 units mW V µA nm nm deg. ns test conditions IF = 20mA IF = 20mA VR = 5.0V IF = 20mA IF = 20mA IF = 20mA IF(PK) = 20mA Revised 3/15/06 Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Plano, Texas 75074-8524 www.clairex.com