CPC1004N_1

CPC1004N 4 Pin SOP OptoMOS® Relay Parameter Blocking Voltage Load Current Max On-resistance Rating 100 300 4 Units VP mADC Ω Features • Small 4 Pin SOP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 1500Vrms Input/Output Isolation • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Tape & Reel Version Available Description CPC1004N is a miniature, low-voltage, low on-resistance 1-Form-A DC solid state relay in a 4-pin SOP package. The relay uses optically coupled MOSFET technology to provide 1500Vrms of input/ output isolation. The efficient MOSFET switch and photovoltaic die use Clare’s patented OptoMOS architecture. The optically coupled input is controlled by a highly efficient GaAIAs infrared LED. The CPC1004N uses Clare’s state of the art double-molded vertical construction packaging to produce one of the world’s smallest relays. The CPC1004N is ideal for replacing larger, less-reliable reed and electromechanical relays. Approvals • UL Recognized Component: File # E76270 • EN/IEC 60950-1 Compliant • CSA Certified Component: Certificate # 1172007 Applications • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment—Patient/Equipment Isolation • Security Systems • Aerospace • Industrial Controls • Reed Relay Replacement Ordering Information Part # Description CPC1004N 4 Pin SOP (100/tube) CPC1004NTR 4 Pin SOP (2000/reel) Pin Configuration + Control 1 4 DC + – Control 2 3 DC - Switching Characteristics of Normally Open (Form A) Devices Control ILOAD + 90% 10%+ tOFF Pb RoHS 2002/95/EC e3 www.clare.com tON DS-CPC1004N-R05 1 CPC1004N Absolute Maximum Ratings Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Capacitance Input to Output Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 100 5 50 1 70 400 1 1500 -40 to +110 -40 to +125 Units VP V mA A mW mW pF Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 3.33 mw / ºC Electrical absolute maximum ratings are at 25ºC Electrical Characteristics Parameter Conditions Symbol Output Characteristics @ 25°C (Unless Otherwise Specified) Load Current Continuous 1 IL Continuous T=110°C, IF=10mA Peak t=10ms ILPK On-Resistance 2 IL=300mA RON Off-State Leakage Current VL=100V ILEAK Switching Speeds Turn-On tON IF=5mA, VL=10V Turn-Off tOFF Output Capacitance 50V; f=1MHz COUT Input Characteristics @ 25°C Input Control Current IL=300mA IF Input Dropout Current IF Input Voltage Drop IF=5mA VF IR Reverse Input Current VR=5V 1 2 Min Typ Max Units 0.3 0.9 - 25 0.9 0.8 1.2 - 300 100 500 4 1 3 1 2 1.4 10 mADC Ω µA ms pF mA mA V µA Load current derates linearly from 300mA @ 25oC to 100mA @ 110oC. Measurement taken within 1 second of on time. 2 www.clare.com R05 CPC1004N PERFORMANCE DATA* Typical LED Forward Voltage Drop (TA=25ºC, IF=5mA) Typical On-Resistance Distribution (TA=25ºC, IL=300mA, IF=2mA) Typical Blocking Voltage Distribution (TA=25ºC) 35 30 Device Count (N) 35 30 Device Count (N) 35 30 Device Count (N) 25 20 15 10 5 0 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 25 20 15 10 5 0 2.9 3.0 3.1 3.2 3.3 3.4 3.5 On-Resistance (Ω) 106 109 112 115 118 121 Blocking Voltage (VP) 124 25 20 15 10 5 0 Typical IF for Switch Operation (TA=25ºC, IL=300mA) 25 20 15 10 5 0 Typical IF for Switch Dropout (TA=25ºC, IL=300mA) 25 20 15 10 5 0 0.75 0.80 0.85 0.90 0.95 1.00 LED Current (mA) 1.05 Typical Turn-On Time (TA=25ºC, IL=300mA, IF=5mA) Device Count (N) Device Count (N) Device Count (N) 0.70 0.75 0.80 0.85 0.90 0.95 LED Current (mA) 1.0 0.25 0.30 0.35 0.40 0.45 Turn-On (ms) 0.50 0.55 25 20 15 10 5 0 Typical Turn-Off Time (TA=25ºC, IL=200mA, IF=5mA) Load Current (mA) Typical Maximum Load Current vs. Temperature 500 450 400 350 300 250 200 150 100 50 Leakage (μA) 0.016 0.014 0.012 0.010 0.008 0.006 0.004 0.002 -40 -20 0 20 40 60 80 100 120 0 -40 Typical Leakage vs. Temperature Measured Across Pins 3 & 4 (VL=100V) Device Count (N) I F =5mA I F =10mA 0.21 0.22 0.23 0.24 0.25 Turn-Off (ms) 0.26 0.27 -20 0 20 40 60 80 100 Temperature (ºC) Temperature (ºC) Typical Blocking Voltage vs. Temperature 122 Blocking Voltage (VP) 121 Turn-On (ms) 120 119 118 117 116 115 -40 -20 0 20 40 60 80 100 Temperature (ºC) 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 -40 Typical Turn-On vs. Temperature (IL=200mA) I F =5mA I F =10mA -20 0 20 40 60 80 100 Temperature (ºC) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -40 Typical Turn-Off vs. Temperature (IL=300mA) Turn-Off (ms) I F =10mA I F =5mA -20 0 20 40 60 80 100 Temperature (ºC) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R05 www.clare.com 3 CPC1004N PERFORMANCE DATA* Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.8 1.6 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 Temperature (ºC) Turn-On (ms) I F =50mA I F =10mA I F =5mA 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 Typical Turn-On vs. LED Forward Current (IL=100mA) 0.7 0.6 Turn-Off (ms) 0.5 0.4 0.3 0.2 0.1 0 Typical Turn-Off vs. LED Forward Current (IL=100mA) 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 12 On-Resistance (Ω) 10 Typical On-Resistance vs. Temperature (IL=300mA) 3.0 2.5 LED Current (mA) Typical IF for Switch Operation vs. Temperature (IL=100mA) 3.0 2.5 LED Current (mA) 2.0 1.5 1.0 0.5 0 -40 -20 0 20 40 60 80 100 -40 Typical IF for Switch Dropout vs. Temperature (IL=100mA) 8 6 4 2 0 -40 -20 0 20 40 60 80 IF = 5mA 2.0 1.5 1.0 0.5 0 IF = 10mA 100 110 -20 0 20 40 60 80 100 Temperature (ºC) Temperature (ºC) Temperature (ºC) 300 Load Current (mA) 200 100 0 -100 -200 Typical Load Current vs. Load Voltage (TA=25ºC, IF=5mA) Energy Rating Curve 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10μs 100μs 1ms 10ms 100ms Time -300 -1.5 Load Current (A) -1.0 -0.5 0 0.5 Load Voltage (V) 1.0 1.5 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R05 CPC1004N MANUFACTURING INFORMATION Moisture Sensitivity Clare has characterized the moisture reflow sensitivity of this package, and has determined that this component must be handled in accordance with IPC/JEDEC standard J-STD-033 moisture sensitivity level (MSL), level 3 classification. Soldering Reflow Profile For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 4-Pin SOP Package 4.089 ± 0.203 (0.161 ± 0.008) 0.200 ± 0.025 (0.008 ± 0.001) Pb RoHS 2002/95/EC e3 Recommended PCB Land Pattern 0.60 (0.0217) 3.810 ± 0.076 (0.150 ± 0.003) Pin 1 2.54 Typ (0.100 Typ) 2.184 Max (0.086 Max) 6.096 ± 0.102 (0.240 ± 0.004) 1.02 ± 0.025 (0.040 ± 0.001) 0.432 ± 0.127 (0.017 ± 0.005) 1.30 (0.0512) 2.54 (0.10) 5.60 (0.2205) 0.0254 - 0.102 (0.001 - 0.004) 0.381 TYP. (0.015 TYP.) Dimensions mm (inches) Tape and Reel Packaging for 4-Pin SOP Package 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 Max (0.472 Max) B0=4.70 (0.185) Pin 1 K0=2.70 (0.106) K1=2.30 (0.091) Embossed Carrier P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Dimensions mm (inches) Embossment NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1004N-R05 ©Copyright 2008, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 9/2/08 5