LCB126STR

LCB126 Single Pole OptoMOS® Relay Load Voltage Load Current Max RON LCB126 250 170 15 Units V mA Ω Description LCB126 is a 250V, 170mA, 15Ω 1-Form-B relay. It features enhanced peak load current capability and lower on-resistance. Features • Small 6 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750VRMS Input/Output Isolation • FCC Compatible • VDE Compatible • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Surface Mount and Tape & Reel Version Available Approvals • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-10 • BSI Certified to: • BS EN 60950:1992 (BS7002:1992) Certificate #: 7344 • BS EN 41003:1993 Certificate #: 7344 Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hookswitch • Dial Pulsing • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Ordering Information Part # LCB126 LCB126S LCB126STR Description 6 Pin DIP (50/Tube) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1000/Reel) Pin Configuration LCB126 Pinout AC/DC Configuration 1 2 3 6 5 4 LCB126 Pinout DC Only Configuration 1 2 3 6 5 4 + Control – Control Do Not Use Load Do Not Use Load + Control – Control Do Not Use + Load – Load Switching Characteristics of Normally Closed (Form B) Devices 10ms CONTROL +90% +10% TOFF + 90% TON DS-LCB126-R3 www.clare.com 1 LCB126 Absolute Maximum Ratings (@ 25˚ C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 2 Min 3750 -40 -40 - Typ Max Units 1501 50 1 5 8002 +85 +125 +260 +220 mW mA A V mW VRMS °C °C °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Derate Linearly 1.33 mw/˚C Derate Linearly 6.67 mw/˚C Electrical Characteristics PARAMETER Output Characteristics @ 25°C Load Voltage (Peak) Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Capacitance Input to Output Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Common Characteristics @ 25°C Input to Output Capacitance Input to Output Isolation CI/O VI/O 3750 3 pF VRMS IL=170mA IF=5mA IF IF VF VR 5 0.4 0.9 0.7 1.2 10 50 1.4 5 mA mA V V µA 10ms IL=170mA IL=300mA VL=250V IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz VL IL IL IL RON RON ILEAK TON TOFF COUT 10 4 50 3 250 170 300 400 15 5 1 5 5 V mA mA mA Ω Ω µA m ms pF pF CONDITIONS SYMBOL MIN TYP MAX UNITS 2 www.clare.com Rev. 3 LCB126 PERFORMANCE DATA* 35 30 Device Count (N) 25 20 15 10 5 0 LCB126 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C) IF = 5mADC 35 30 Device Count (N) LCB126 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 170mADC) LCB126 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) 35 30 Device Count (N) 25 20 15 10 5 0 25 20 15 10 5 1.17 1.19 1.21 1.23 1.25 0 10.4 10.8 11.2 11.6 12.0 12.4 On-Resistance (Ω) 291.25 293.75 296.25 298.75 301.25 303.75 Blocking Voltage (V) LED Forward Voltage Drop (V) LCB126 Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 170mADC) 25 20 15 10 5 0 0.45 0.63 0.81 0.99 1.17 1.35 1.53 LED Current (mA) 40 35 Device Count (N) Device Count (N) 30 25 20 15 10 5 0 LCB126 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 170mADC) 30 25 Device Count (N) 0.45 0.63 0.81 0.99 1.17 1.35 1.53 20 15 10 LCB126 Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 170mADC; IF = 5mADC) 5 0 0.30 0.42 0.54 0.66 0.78 0.90 1.02 LED Current (mA) Turn-On (ms) 35 30 25 20 15 10 LCB126 Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 170mADC; IF = 5mADC) LCB126 Typical Load Current vs. Temperature 250 Load Current (mA) 200 Leakage (µA) 150 100 50 0 LCB126 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) 0.030 0.025 0.020 0.015 0.010 0.005 0 -40 -20 0 20 40 60 80 100 Device Count (N) 5mA 5 0 0.625 0.875 1.125 1.375 1.625 1.875 2.125 Turn-Off (ms) -40 -20 0 20 40 60 80 100 120 Temperature (°C) Temperature (°C) LCB126 Typical Blocking Voltage vs. Temperature 310 Blocking Voltage (VRMS) 305 Turn-on (ms) 300 295 290 285 -40 -20 0 20 40 60 80 100 Temperature (°C) 1.2 1.0 0.8 0.6 0.4 LCB126 Typical Turn-On vs. Temperature (Load Current = 170mADC) 2.5 2.0 Turn-Off (ms) 1.5 1.0 LCB126 Typical Turn-Off vs. Temperature (Load Current = 170mADC) 5mA 5mA 0.2 0 -40 -20 0 20 40 60 80 100 Temperature (°C) 10mA 0.5 20mA 0 -40 -20 0 20 40 60 80 100 Temperature (°C) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 3 www.clare.com 3 LCB126 PERFORMANCE DATA* LCB126 Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.8 1.6 Turn-On (ms) LCB126 Typical Turn-On vs. LED Forward Current (Load Current = 170mADC) 0.634 0.632 Turn-off (ms) LCB126 Typical Turn-Off vs. LED Forward Current (Load Current = 170mADC) 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 1.4 50mA 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 Temperature (°C) 0.630 0.628 0.626 0.624 0.622 0 5 10 15 20 25 30 35 40 45 LED Forward Current (mA) 50 30mA 20mA 10mA 5mA LED Forward Current (mA) 60 On-Resistance (Ω) LCB126 Typical On-Resistance vs. Temperature (Load Current = 170mADC; IF = 5mA) LCB126 Typical IF for Switch Operation vs. Temperature (Load Current = 170mADC) 3.000 LED Current (mA) LED Current (mA) 2.500 2.000 1.500 1.000 0.500 LCB126 Typical IF for Switch Dropout vs. Temperature (Load Current = 170mADC) 3.000 2.500 2.000 1.500 1.000 0.500 0 -40 -20 0 20 40 60 80 100 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 Temperature (°C) 0 -40 -20 0 20 40 60 80 100 Temperature (°C) Temperature (°C) LCB126 Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C) IF = 5mADC 200 150 LCB126 Energy Rating Curve 1.2 1.0 Load Current (A) 0.8 0.6 0.4 0.2 Load Current (mA) 100 50 0 -50 -100 -150 -200 -2.0 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 2.0 0 10µs 100µs 1ms 10ms 100ms Time 1s 10s 100s Load Voltage (V) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 3 LCB126 Mechanical Dimensions 6 Pin DIP Through Hole (Standard) 7.620 ± .254 (.300 ± .010) 3.302 (.130) 6.350 ± .127 (.250 ± .005) 9.144 ± .508 (.360 ± .020) 8.382 ± .635 (.330 ± .025) 2.540 ± .127 (.100 ± .005) PC Board Pattern (Top View) 6-.800 DIA. (6-.031 DIA.) 9.144 (.360) 6.350 ± .127 (.250 ± .005) 2.540 ± .127 (.100 ± .005) 7.620 ± .127 (.300 ± .005) 7.239 TYP. (.285) .457 ± .076 (.018 ± .003) 5.080 ± .127 (.200 ± .005) Tape and Reel Packaging for 6 Pin Surface Mount Package 330.2 DIA. (13.00) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 ± .102 (.265) (.069 ± .004) .406 MAX. (.016) 7.493 ± .102 (.295 ± .004) 12.090 (.476) 4.877 (.192) 1 6 16.002 ± .305 (.630 ± .012) 10.100 (.398) Embossed Carrier Top Cover Tape .050R TYP. 11.989 ± .102 (.472 ± .004) User Direction of Feed 10.100 ± .102 (.398 ± .004) 1.549 ± .102 (.061 ± .004) Embossment Dimensions mm (inches) Rev. 3 www.clare.com 5 Worldwide Sales Offices CLARE LOCATIONS Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 EUROPE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 ASIA PACIFIC Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-LCB126-R3 ©Copyright 2000, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 2/1/01