LOC117S

Linear Optocoupler LOC117 Parameter LED Operating Range K3, Transfer Gain Isolation, Input to Output Rating 2-10 0.887-1.072 3750 Units mA - Description The LOC117 Linear Optocoupler features an infrared LED optically coupled to a pair of phototransistors. An input phototransistor provides the servomechanism used to generate a feedback control signal for the input LED drive current thus compensating for the LED's nonlinear time and temperature characteristics. The output phototransistor provides an isolated signal that is linear with respect to the servo LED current. LOC117 features include wide bandwidth, high input-to-output isolation, and excellent servo linearity. Vrms Features • • • • • • • • • • • • Small 8-Pin Package Flatpack Package (PCMCIA Compatible) Couples Analog and Digital Signals Wide Bandwidth (>200kHz) High Gain Stability Low Input-to-Output Capacitance Low Power Consumption 0.01% Servo Linearity THD 87dB Typical Machine Insertable, Wave Solderable Surface Mount Tape and Reel Packaging Available VDE Compatible Approvals • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-10 • EN/IEC 60950-1:2001 Compliant Applications • Modem Transformer Replacement With No Insertion Loss • Digital Telephone Isolation • Power Supply Feedback Voltage/Current • Medical Sensor Isolation • Audio Signal Interfacing • Isolation of Process Control Transducers Ordering Information Part # LOC117 LOC117P LOC117PTR LOC117S LOC117STR Description 8-Pin DIP (50/tube) 8-Pin Flatpack (50/tube) 8-Pin Flatpack (1000/Reel) 8-Pin Surface Mount (50/tube) 8-Pin Surface Mount (1000/Reel) Pin Configuration – LED + LED +VC1 I1 1 2 3 4 8 7 6 5 N/C N/C +VC2 I2 2002/95/EC RoHS e3 www.clare.com 1 DS-LOC117-R01 LOC117 Absolute Maximum Ratings Parameter Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Ratings 5 100 1 150 500 3750 -40 to +85 -40 to +125 Units V mA A mW mW Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Total Package Dissipation 2 Isolation Voltage Input to Output Operational Temperature Storage Temperature 1 2 Derate Linearly 1.33 mW/°C Derate Linearly 6.67 mW/°C Electrical absolute maximum ratings are at 25°C Electrical Characteristics Parameter Input Characteristics @ 25°C LED Voltage Drop Reverse LED Current Coupler/Detector Characteristics @ 25°C Dark Current K1, Servo Gain (I1/IF) K2, Forward Gain (I2/IF) K3, Transfer Gain (K2/K1) ∆K3, Transfer Gain Linearity (non-servoed) K3 Temperature Coefficient Common Mode Rejection Ratio Total Harmonic Distortion Frequency Response Common Characteristics @ 25°C Input/Output Capacitance Conditions IF=2-10mA VR=5V IF=0mA, VCB=15V IF=2-10mA, VCB1=15V IF=2-10mA, VCB2=15V IF=2-10mA, VCB1=VCB2=15V IF=2-10mA IF=2-10mA, Vdet=-5V V=20VPP, RL=2KΩ, f=100Hz fO=350Hz, 0dBm Photoconductive Operation Photovoltaic Operation Symbol VF IR ICBO K1 K2 K3 ∆K3 ∆K3/∆T CMRR THD f-3dB f-3dB CI/O Min 0.9 0.008 0.006 0.887 -96 Typ 1.2 1 1.0 0.005 130 -87 200 40 3 Max 1.4 10 25 0.030 0.030 1.072 1.0 -80 Units V µA nA % %/°C dB dB kHz kHz pF 2 www.clare.com R01 LOC117 PERFORMANCE DATA* LOC117 LED Current (I F) vs. LED Forward Voltage (V F) LOC117 LED Current (IF) vs. LED Forward Voltage (VF) 50 LED Current (mA) 40 30 20 10 0 100 LED Current (mA) 0.014 0.012 Servo Gain LOC117 Servo Gain vs. LED Current & Temperature 0°C 25°C 50°C 70°C 85°C 10 0.010 0.008 0.006 0.004 0.002 1 1.1 1.2 1.3 1.4 1.5 LED Forward Voltage (V) 1.6 0.1 1.1 0 1.2 1.3 1.4 1.5 LED Forward Voltage (V) 1.6 0 2 4 6 8 10 12 LED Current (mA) Normalized Servo-Photocurrent 140 Servo-Photocurrent (µA) 120 100 80 60 40 20 0 0 LOC117 Servo-Photocurrent vs. LED Current & Temperature 0°C 25°C 50°C 70°C 85°C 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 LOC117 Normalized Servo-Photocurrent vs. LED Current & Temperature 0°C 25°C 50°C 70°C 85°C LOC117 Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 0.9 -40 -15 10 35 60 85 IF = 10mA IF = 5mA IF = 20mA 2 4 6 8 10 12 0 2 4 6 8 10 12 LED Current (mA) LED Current (mA) Temperature (°C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R01 www.clare.com 3 LOC117 Manufacturing Information Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Recommended soldering processes are limited to 260ºC component body temperature for 10 seconds. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. 2002/95/EC RoHS e3 MECHANICAL DIMENSIONS 8-Pin DIP Through Hole (Standard) 7.620 ± 0.254 (0.300 ± 0.010) 2.540 ± 0.127 (0.100 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) 9.144 ± 0.508 (0.360 ± 0.020) 9.652 ± 0.381 (0.380 ± 0.015) PC Board Pattern (Top View) 2.540 ± 0.127 8-0.800 DIA. (0.100 ± 0.005) (8-0.031 DIA.) 7.620 ± 0.127 (0.300 ± 0.005) 7.239 TYP. (0.285) 3.302 (0.130) 9.144 TYP. (0.360) 6.350 ± 0.127 (0.250 ± 0.005) 0.457 ± 0.076 (0.018 ± 0.003) 8.077 ± 0.127 (0.318 ± 0.005) 7.620 ± 0.127 (0.300 ± 0.005) 8-Pin Surface Mount (“S” Suffix) 2.540 ± 0.127 (0.100 ± 0.005) 9.652 ± 0.381 (0.380 ± 0.015) PC Board Pattern (Top View) 2.540 ± 0.127 (0.100 ± 0.005) 7.620 ± 0.254 (0.300 ± 0.010) 4.445 ± 0.127 (0.175 ± 0.005) 3.302 (0.130) 0.635 TYP. (0.025) 6.350 ± 0.127 (0.250 ± 0.005) 9.525 ± 0.254 (0.375 ± 0.010) 8.305 ± 0.127 (0.327 ± 0.005) 1.905 ± 0.127 (0.075 ± 0.005) 0.254 TYP. (0.010) 0.457 ± 0.076 (0.018 ± 0.003) 8.077 ± 0.127 (0.318 ± 0.005) 1.498 ± 0.127 (0.059 ± 0.005) 8-Pin Flatpack (“P” Suffix) 9.652 ± 0.381 (0.380 ± 0.015) 2.540 ± 0.127 (0.100 ± 0.005) PC Board Pattern (Top View) 2.540 ± 0.127 (0.100 ± 0.005) 7.620 ± 0.254 2.159 TYP. (0.300 ± 0.010) (0.085) 2.286 MAX. (0.090) 0.635 ± 0.127 (0.025) 6.350 ± 0.127 (0.250 ± 0.005) 9.398 ± 0.127 (0.370 ± 0.005) 0.203 (0.008) 8.763 ± 0.127 (0.345 ± 0.005) 1.193 (0.047) 0.457 ± 0.076 (0.018 ± 0.003) 8.077 ± 0.127 (0.318 ± 0.005) 0.787 (0.031) Dimensions: mm (inches) www.clare.com R01 4 MECHANICAL DIMENSIONS Tape and Reel Packaging for 8-Pin Surface Mount Package 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 1 8 W = 16.30 max (0.642 max) Bo = 10.30 (0.406) Top Cover Tape P = 12.00 (0.472) K0 = 4.90 (0.193) Embossed Carrier Ao = 10.30 (0.406) Embossment User Direction of Feed K1 = 4.20 (0.165) NOTE: Tape dimensions not shown, comply with JEDEC Standard EIA-481-2 Tape and Reel Packaging for 8-Pin Flatpack Package 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 1 8 W = 16.30 max (0.642 max) Bo = 10.30 (0.406) Top Cover Tape Embossed Carrier P = 12.00 (0.472) Ao = 10.30 (0.406) Embossment K0 = 2.70 (0.106) User Direction of Feed K1 = 2.00 (0.079) NOTE: Tape dimensions not shown, comply with JEDEC Standard EIA-481-2 Dimensions: mm (inches) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-LOC117-R01 ©Copyright 2006, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 10/26/06 5