PS2601

PS2601 AC Power Switch PS2601 AC Operating Voltage Load Current On-State Voltage Drop Units VRMS A VRMS (AT IL = 1A) 1 1.2 Description PS2601 is an AC Solid State Switch utilizing dual power SCR outputs. This device also includes zero turn on circuitry and is available with a blocking voltage up to 600V. Features • Load Current up to 1A (3A with heat sink) • Blocking Voltages up to 600V • 5mA Sensitivity • Zero-Crossing Detection • DC Control, AC Output • Optically Isolated • TTL and CMOS Compatible • Low EMI and RFI Generation • High Noise Immunity • VDE compatible • Machine Insertable, Wave Solderable Approvals • UL recognized file #: E69938 • CSA certified file #: LR 43639-8 Applications • Programmable Control • Process Control • Power Control Panels • Remote Switching • Gas Pump Electronics • Contractors • Large Relays • Solenoids • Motors • Heaters Ordering Information Part # PS2601 Description 8 Pin SIP (25/Tube) Pin Configuration PS Series Pinout ZC 1 2 – LED + LED 6 8 AC Load AC Load DS-PS2601-R9 www.clare.com 1 PS2601 Absolute Maximum Ratings (@ 25˚ C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Package Dissipation PS Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 2 Min 3750 -40 -40 - Typ Max Units 1501 50 1 5 mW mA A V 16002 mW +85 +125 +260 +220 VRMS °C °C °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Derate Linearly 1.33 mW/˚C Derate Linearly 16.6 mW/˚C Electrical Characteristics Parameters Output Characteristics @ 25°C Peak Blocking Voltage Load Current (Continuous) Off State Leakage Current On-State Voltage Drop Critical Rate of Rise Switching Speeds Turn-on Turn-off Zero-Cross Turn-On Voltage Sub. half cycle Operating Frequency1 Load Power Factor for Guaranteed Turn-On2 Capacitance Input to Output Input Characteristics @ 25°C Input Control Current For Normal Environment For High Noise Environment Input Voltage Drop Input Drop-out Voltage Reverse Input Current Common Characteristics @ 25°C Input to Output Capacitance Input to Output Isolation 1 2 Conditions VL=120-240VAC VDRM IL=1A IF=5 mA IF=5 mA 1st half cycle Symbol VDRM IL ILEAK dv/dt TON TOFF - Min 0.005 1000 20 Typ 1200 2 3 Max 600 1 1 1.2 0.5 0.5 5 1 500 - Units V A mA VRMS V/µS cycles cycles V V Hz pF PF - 0.25 - F=5mA IF IF VF IR CI/O VI/O 5 10 0.9 0.8 3750 1.2 - 50 100 1.4 10 3 - mA mA V V uA pF VRMS VR=5V - Zero Cross 1st half cycle @