0604HQ-4N5XJL

Document 285-1 Chip Inductors -- 0604HQ Series (1610) Chip Inductors 0604SMS • Combines the exceptionally high Q of an air core inductor with the rugged construction of a ceramic body component. • Provides intermediate inductance values not available in Coilcraft’s 0603, 0402 or 0906 product families SRF DCR min5 max6 Irms7 (GHz) (Ohms) (A) 12.3 0.021 3.0 9.3 0.026 2.0 5.8 0.032 1.8 5.3 0.032 1.6 4.7 0.035 1.8 4.4 0.035 1.5 4.1 0.037 1.5 Request free evaluation samples by contacting Coilcraft or visiting www.coilcraft.com. Part number1 0604HQ-1N1XJL_ 0604HQ-2N6XJL_ 0604HQ-4N5XJL_ 0604HQ-5N0XJL_ 0604HQ-6N8XJL_ 0604HQ-7N6XJL_ 0604HQ-10NXJL_ Inductance2 (nH) 1.15 2.6 4.5 5.0 6.8 7.6 10.4 Percent tolerance3 5 5 5 5 5 5 5 Q 900 MHz min4 L typ Q typ 25 1.2 40 45 2.6 78 50 4.5 103 60 4.9 106 60 6.9 101 60 7.4 109 60 10.6 103 1.7 GHz L typ Q typ 1.2 136 2.6 163 4.7 155 5.2 178 7.4 172 7.9 137 11.5 160 Color code Black Brown Red Orange Yellow Green Blue 1. When ordering, please specify termination and packaging codes: 0604HQ-10NXJLC Termination: L = RoHS compliant silver-palladium-platinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. 2. Inductance measured at 500 MHz using a Coilcraft SMD-A fixture in an Agilent/HP 4286 impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured at 500 MHz using an Agilent/HP 4291A with an Agilent/ HP 16193 test fixture. 5. For SRF less than 6 GHz, measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture. For SRF greater than 6 GHz, measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD-D test fixture. 6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF858 test fixture. 7. Current that causes a 15°C temperature rise from 25°C ambient. 8. Electrical specifications at 25°C. 9. Temperature coefficient of inductance: +25 to +125 ppm/°C. See Qualification Standards section for environmental and test data. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Designer’s Kit C351 contains 10 each of all values Core material Ceramic Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 4.6 – 5.6 g Ambient temperature –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature Component: –40°C to +140°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +126 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at