1N5408-G

General Purpose Silicon Rectifiers 1N5400-G Thru. 1N5408-G Voltage: 50 to 1000 V Current: 3.0 A RoHS Device DO-27 (DO-201AD) Features -Low forward voltage drop. -High reliability. 0.052(1.32) DIA. 0.048(1.22) -High current capability. 1.000(25.40) Min. -High surge current capability. Mechanical data 0.375(9.53) 0.335(8.51) -Case: Molded plastic 0.220(5.60) DIA. 0.197(5.00) -Epoxy: UL 94V-0 rate flame retardant -Polarity: Color band denotes cathode end 1.000(25.40) Min. -Lead: Axial leads, solderable per MIL-STD-202, method 208 guaranteed -Mounting position: Any -Weight: 1.2 grams Dimensions in inches and (millimeter) Maximum Ratings and Electrical Characteristics (at T =25°C unless otherwise noted) A Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. 1N5401 1N5402 1N5404 1N5406 1N5407 1N5408 Unit Symbol 1N5400 -G -G -G -G -G -G -G Parameter Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current .375”(9.5mm) Lead length @TA=75°C IF(AV) 3.0 A Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 200 A Maximum instantaneous forward voltage @3.0A VF 1.0 V Maximum DC reverse current at rated DC blocking voltage @TJ=25°C @TJ=100°C Typical thermal resistance (Note 1) Operating temperature range Storage temperature range IR 5.0 μA 100 RθJA 18 °C/W TJ -65 to +125 °C TSTG -65 to +150 °C NOTES: 1. Thermal resistance from junction to ambient 0.375” (9.5mm) lead length. REV:A QW-BG015 Page 1 General Purpose Silicon Rectifiers Rating and Characteristic Curves (1N5400-G Thru. 1N5408-G) Fig.1 - Maximum Forward Current Derating Curve Fig.2 - Typical Instantaneous Forward Characteristics Per Bridge Element 100 Instantaneous Forward Current, (A) Average Forward Current, (A) 3.0 2.0 1.0 Single phase half wave 60Hz Resistive or inductive load 0.375” (9.5mm) lead length 0 0 25 50 75 100 125 10 1 0.1 TJ =25°C Pulse width=300us 1% Duty cycle 0.01 0.4 150 Ambient Temperature, (°C) Fig.3 - Maximum Non-repetitive Forward Surge Curren Per Bridge Element 100 50 8.3ms single half sine-wave (JEDEC Method) 10 10 Number of Cycles at 60Hz 0.8 1.0 1.2 1.4 1.6 1.8 Fig.4 - Typical Reverse Characteristics Per Bridge Element Instantaneous Reverse Current, (µA) Peak Forward Surge Current, (A) 200 1 0.6 Instantaneous Forward Voltage, (V) 100 10.0 TJ=100°C 1.0 0.1 TJ=25°C 0.01 0 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage, (V) REV:A QW-BG015 Page 2 General Purpose Silicon Rectifiers Taping Specification For Axial Lead Diodes E 90° ± 5° Z A L1 B L2 T E Do W0 D1 L H D W DO-27 (DO-201AD) DO-27 (DO-201AD) SYMBOL A B Z T E L1 L2 (mm) 10.00 ± 0.50 52.00 ± 0.50 1.20 (max) 6.00 ± 0.40 1.00 (max) 1.00 (max) 1.00 (max) (inch) 0.394 ± 0.020 2.047 ± 0.020 0.047 (max) 0.236 ± 0.016 0.039 (max) 0.039 (max) 0.039 (max) SYMBOL D1 D0 D W0 L W H (mm) 85.70 ± 0.30 16.60 ± 0.40 330.00 72.00 ± 3.00 260.00 75.00 145.00 (inch) 3.374 ± 0.012 0.654 ± 0.016 13.000 2.835 ± 0.118 10.236 2.953 5.709 REV:A QW-BG015 Page 3 General Purpose Silicon Rectifiers Marking Code Part Number Marking code Packaging 1N5400-G 1N5401-G 1N5402-G 1N5404-G 1N5406-G 1N5407-G 1N5408-G 1N5400T-G 1N5401T-G 1N5402T-G 1N5404T-G 1N5406T-G 1N5407T-G 1N5408T-G 1N5400 1N5401 1N5402 1N5404 1N5406 1N5407 1N5408 1N5400 1N5401 1N5402 1N5404 1N5406 1N5407 1N5408 AMMO AMMO AMMO AMMO AMMO AMMO AMMO REEL REEL REEL REEL REEL REEL REEL 1N54XX XX = Product type marking code Note: 1) Suffix code after part number to specify packaging item . Packaging Code AMMO PACK NA REEL PACK T Standard Packaging AMMO PACK Case Type DO-27 (DO-201AD) BOX CARTON ( pcs ) ( pcs ) 1,200 12,000 REEL PACK Case Type DO-27 (DO-201AD) REEL Reel Size ( pcs ) (inch) 1,200 13 REV:A QW-BG015 Page 4