ES1J-HF

SMD Super Fast Recovery Rectifiers ES1A-HF Thru. ES1J-HF Reverse Voltage: 50 to 600 Volts Forward Current: 1 Amp RoHS Device Halogen Free SMA/DO-214AC Features 0.177(4.50) 0.157(4.00) - For surface mounted applications. - Low profile package. 0.063(1.60) 0.051(1.30) - Glass passivated chip junction. 0.106(2.70) 0.091(2.30) - Super fast reverse recovery time. 0.205(5.20) 0.185(4.70) Mechanical data 0.012(0.31) 0.006(0.15) - Case: SMA 0.087(2.20) 0.075(1.90) - Terminals: Solderable per MIL-STD-750, method 2026. 0.059(1.50) 0.035(0.90) 0.012(0.30) Typ. Circuit Diagram Dimensions in inches and (millimeter) Anode Cathode Maximum Ratings and Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz resistive or inductive load, for capacitive load, derate by 20% Symbols ES1A -HF ES1B -HF ES1C -HF ES1D -HF ES1E -HF ES1G -HF ES1J -HF Units Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 600 V Maximum RMS voltage VRMS 35 70 105 140 210 280 420 V Maximum DC blocking voltage VDC 50 100 150 200 300 400 600 V Maximum average forward rectified current IF(AV) 1 A Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30 A Parameter Max. forward voltage at 1A Maximum DC reverse current at rated DC blocking voltage 1.0 VF Ta = 25°C Ta =125°C 1.25 1.70 V IR 5 100 µA Typical junction capacitance at VR = 4V, f = 1MHz Cj 15 pF Maximum reverse recovery time (Note 1) trr 35 ns RθJA 75 °C/W Tj, Tstg -55 ~ +150 °C Typical thermal resistance (Note 2) Operating and storage temperature range Notes: 1. Measured with IF = 0.5A, IR = 1A, Irr = 0.25A. 2. P.C.B. mounted with 1.0 x 1.0" (2.54 x 2.54 cm) copper pad areas. Company reserves the right to improve product design , functions and reliability without notice. QW-JS009 REV:A Page 1 Comchip Technology CO., LTD. SMD Super Fast Recovery Rectifiers Rating and Characteristic Curves (ES1A-HF Thru. ES1J-HF) Fig.1 - Max. Average Forward Current Rating Fig.2 - Typical Reverse Characteristics 300 100 1.0 Reverse Current, IR (μA) Average Forward Current, (A) 1.2 0.8 0.6 0.4 TJ=125°C 10 TJ=75°C 1.0 0.2 TJ=25°C Single phase half-wave resistive or inductive 0 0 25 50 75 100 125 0.1 150 20 40 60 80 100 Case Temperature, (°C) % of PIV.Volts Fig.3 - Typical Forward Characteristic Fig.4 - Typical Junction Capacitance 30 10 TJ=25°C ES1A-HF~ES1D-HF Junction Capacitance, (pF) Instantaneous Forward Current, (A) 0 1.0 0.1 ES1E-HF/ES1G-HF 0.01 0.001 ES1J-HF 0 0.5 1.0 1.5 2.0 2.5 25 20 15 10 5 0 TJ=25°C f=1MHz Vsig=50mVp-p 0.1 Instantaneous Forward Voltage, (V) 1 10 100 Reverse Voltage, (V) Fig.5 - Maximum Non-Repetitive Peak Forward Surge Current Peak Forward Surge Current, (A) 35 30 25 20 15 10 5 0 8.3ms single half sine wave (JEDEC Method) 1 10 100 Number of Cycles Company reserves the right to improve product design , functions and reliability without notice. QW-JS009 REV:A Page 2 Comchip Technology CO., LTD. SMD Super Fast Recovery Rectifiers Reel Taping Specification d P0 T P1 E Index hole F B W C P A 12 o 0 D1 D2 D W1 Trailer Device ....... ....... End ....... ....... Leader ....... ....... ....... ....... 160mm (min) Start 400mm (min) Direction of Feed DO-214AC (SMA) SYMBOL A B C d D D1 D2 (mm) 2.70 ± 0.10 5.33 ± 0.10 2.35 ± 0.10 1.55 ± 0.05 330 ± 2.00 75.00 ± 1.00 13.00 ± 0.20 (inch) DO-214AC (SMA) 0.106 ± 0.004 0.210 ± 0.004 0.093 ± 0.004 0.061 ± 0.002 12.992 ± 0.079 2.953 ± 0.039 0.512 ± 0.008 SYMBOL E F P P0 P1 T W W1 (mm) 1.75 ± 0.10 5.50 ± 0.05 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.10 0.20 ± 0.03 12.00 ± 0.30 14.70 + 2.00 − 1.00 0.008 ± 0.001 0.472 ± 0.012 0.579 + 0.079 − 0.039 (inch) 0.069 ± 0.004 0.217 ± 0.002 0.157 ± 0.004 0.157 ± 0.004 0.079 ± 0.004 Company reserves the right to improve product design , functions and reliability without notice. QW-JS009 REV:A Page 3 Comchip Technology CO., LTD. SMD Super Fast Recovery Rectifiers Marking Code Part Number Marking Code ES1A-HF ES1A ES1B-HF ES1B ES1C-HF ES1C ES1D-HF ES1D ES1E-HF ES1E ES1G-HF ES1G ES1J-HF ES1J XXXX Product type marking code Cathode band xxxx = Product type marking code Suggested PAD Layout D DO-214AC (SMA) SIZE A (mm) (inch) A 2.40 0.094 B 1.80 0.071 C 1.80 0.071 D 6.00 0.236 C B Note: 1. The pad layout is for reference purpose only. Standard Packaging REEL PACK Case Type DO-214AC (SMA) REEL Reel Size ( pcs ) (inch) 5,000 13 Company reserves the right to improve product design , functions and reliability without notice. QW-JS009 REV:A Page 4 Comchip Technology CO., LTD.