FR107A-G

Fast Recovery Rectifiers FR101-G Thru. FR107-G Voltage: 50 to 1000 V Current: 1.0 A RoHS Device DO-41 Features - Fast switching for high efficiency. 1.0(25.40) Min. - Diffused junction. - Low reverse leakage current. - Low forward voltage drop 0.205(5.20) 0.161(4.10) - High current capability. 0.106(2.70) 0.079(2.00) DIA. 1.0(25.40) Min. Mechanical data DIA. 0.030(0.75) 0.020(0.50) - Case: JEDEC DO-41 molded plastic Dimensions in inches and (millimeter) - Epoxy: UL 94V-0 rate flame retardant - Polarity: Color band denotes cathode - Lead: Plated axial lead, solderable per MIL-STD-750, method 2026. Circuit Diagram - Mounting position: Any Maximum Ratings (at TA=25°Cunless otherwise noted) Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20%. Symbol FR101 -G FR102 -G FR103 -G FR104 -G FR105 -G FR106 -G FR107 -G Unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current @TA=75°C I(AV) 1.0 A Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 30 A Parameter Maximum reverse recovery time (Note 1) Operating temperature range Storage temperature range trr 150 250 500 nS TJ -55 ~ +150 °C TSTG -55 ~ +150 °C Notes: 1. Measured with IF=0.5A, IR=1A, IRR=0.25A. Company reserves the right to improve product design , functions and reliability without notice. REV:C Page 1 QW-BF008 Comchip Technology CO., LTD. Fast Recovery Rectifiers Electrical Characteristics (at T =25°C unless otherwise noted) A Parameter Symbol Conditions Forward voltage IF = 1.0A DC DC reverse current at rated DC blocking voltage TJ = 25°C Typ Min Max Unit 1.3 V VF 5.0 µA IR 100 TJ = 100°C Junction capacitance FR101-G/FR102-G FR103-G/FR104-G FR105-G/ FR106-G FR107-G VR = 4V, f = 1.0MHZ Thermal resistance Junction to ambient CJ 25 pF CJ 15 pF RθJA 25 °C/W RATING AND CHARACTERISTIC CURVES (FR101-G Thru. FR107-G) Fig.2 - Maximum Non-repetitive Surge Current Fig.1 - Forward Current Derating Curve 40 Single phase half wave, 60Hz Resistive or inductive load Peak Forward Surge Current, (A) Average Forward Current, IF (A) 1.2 1.0 0.8 0.6 0.4 0.2 0 30 20 10 Pulse width 8.3ms Single half sine-wave (JEDEC Method) 0 0 25 50 75 100 125 0 150 10 Ambient Temperature, TA (°C) Fig.4 - Typical Forward Characteristics Fig.3 - Typical Junction Capacitance 100 Instantaneous Forward Current, IF (A) 10 TJ=25°C f=1MHz Junction Capacitance, CJ (pF) 100 Number of Cycles at 60Hz FR10 1-G ~ FR10 4-G 10 FR10 5 -G ~ FR10 7 -G 1 1.0 0.1 TJ=25°C PULSE WIDTH 300us 0.01 1 10 100 0 Reverse Voltage, VR (V) 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Instantaneous Forward Voltage, VF (V) Company reserves the right to improve product design , functions and reliability without notice. REV:C Page 2 QW-BF008 Comchip Technology CO., LTD. Fast Recovery Rectifiers Taping Specification For Axial Lead Diodes Z A E 90° ± 5° L1 B L2 T E Do W0 D1 L H D DO-41 DO-41 W SYMBOL A B Z T E |L1-L2| (mm) 5.00 ± 0.50 1.20 (max) 6.00 ± 0.40 0.80 (max) 1.00 (max) (inch) 0.197 ± 0.020 52.40 + 1.50 − 0.40 2.063 + 0.059 − 0.016 0.047 (max) 0.236 ± 0.016 0.031 (max) 0.039 (max) SYMBOL D1 D0 D W0 L W H (mm) 85.70 ± 0.30 16.60 ± 0.40 330.00 79.00 ± 1.00 255.00 ± 5.00 75.00 ± 5.00 150.00 ± 5.00 (inch) 3.374 ± 0.012 0.654 ± 0.016 12.992 3.110 ± 0.039 10.039 ± 0.197 2.953 ± 0.197 5.906 ± 0.197 Company reserves the right to improve product design , functions and reliability without notice. REV:C Page 3 QW-BF008 Comchip Technology CO., LTD. Fast Recovery Rectifiers Marking Code Part Number FR101A-G FR102A-G FR103A-G FR104A-G FR105A-G FR106A-G FR107A-G FR101T-G FR102T-G FR103T-G FR104T-G FR105T-G FR106T-G FR107T-G FR101B-G FR102B-G FR103B-G FR104B-G FR105B-G FR106B-G FR107B-G Marking code Packaging FR101 FR102 FR103 FR104 FR105 FR106 FR107 FR101 FR102 FR103 FR104 FR105 FR106 FR107 FR101 FR102 FR103 FR104 FR105 FR106 FR107 AMMO AMMO AMMO AMMO AMMO AMMO AMMO REEL REEL REEL REEL REEL REEL REEL BULK BULK BULK BULK BULK BULK BULK FRXXX XXX = Product type marking code Note: 1) Suffix code after part number to specify packaging item . Packaging Code AMMO PACK A REEL PACK T BULK PACK B Standard Packaging AMMO PACK Case Type BOX ( pcs ) 5,000 DO-41 REEL PACK Case Type DO-41 REEL Reel Size ( pcs ) (inch) 5,000 13 BULK PACK Case Type BOX ( pcs ) DO-41 1,000 Company reserves the right to improve product design , functions and reliability without notice. REV:C Page 4 QW-BF008 Comchip Technology CO., LTD.