OH4610LF-012.8M

Precision OCXO OH4 Series Preliminary 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Description: Features: The Connor-Winfield OH4 Series, 14 Pin DIP Oven Stabilized Crystal Controlled Oscillators (OCXO) series, and Oven Stabilized Crystal Controlled Voltage Controlled Oscillators (OCVCXO) series, are designed for use in applications requiring stabilities of ±5ppb to ±100ppb. The OH4 series is also designed for compliance to ITU-T G.8262 Options 1 and 2, and ITU-T G.8263. • OCXO - Fixed Frequency • OCVCXO - Voltage Controlled • Frequencies Range: 6.4 MHz to 40 MHz Higher Frequencies available upon request • 3.3V or 5.0V Operation • LVCMOS, HCMOS or Sinewave Output • Frequency Stabilities Available: ±5ppb; ±10ppb; ±20ppb; ±25ppb ±50ppb, or ±100ppb • Temperature Ranges Available: 0 to 70°C, -20 to 70°C, -20 to 75°C, -40 to 70°C, or -40 to 85°C • Low Phase Noise • 14 Pin DIP Package • RoHS Compliant / Lead Free Pin Connections 14 Pin DIP Package Pin Function 1: OCXO - N/C OCVCXO - Voltage Control 7 Ground (Case) 8: Output 14: Vcc .800 .500 (20.32mm) (12.7mm) .400 MAX (10.16mm) .018 Dia. .25 (.46mm Dia.) (6.35mm) .025 Glass Standoff (4 Places) (.64mm) .600 (15.24mm) .150 (3.81mm) CW .300 (7.62mm) 14 1740 OH4520LF 10.0 MHZ Dimensional Tolerance: ±.005 (.127mm) ±.02 (.508mm) .400 (10.16mm) Ordering Information OH4 Oscillator Type Precision Frequency Std OCXO or OCVCXO Bulletin Bulletin Page Page Revision Revision Date Date Cx225 Cx259 1 1ofof4 4 P04 07 07Oct Sep2019 2011 15 Package Type OH4 = 14 Pin DIP 5 10 L F -010.0M Temperature Range 5 = 0 to 70°C 6 = -40 to 85°C 7 = -20 to 70°C 8 = -40 to 70°C 9 = -20 to 75°C Frequency Stability Supply Voltage / Output Output Output Frequency L = 3.3Vdc / LVCMOS H = 5.0Vdc / HCMOS S = 5.0Vdc / Sinewave R = 3.3Vdc / Sinewave V = OCVCXO *05 = ±5 ppb 10 = ±10 ppb 20 = ±20 ppb 25 = ±25 ppb 50 = ±50 ppb 100 = ±100ppb * ±5ppb stability only available for 0 - 70°C or -20 to 70°C F = OCXO (Fixed Freq.) (Voltage Controlled) M = MHz xxx.xxM 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Absolute Maximum Ratings Parameter Storage Temperature Supply Voltage (Vcc) 3.3V LVCMOS 5.0V HCMOS / Sinewave Control Voltage (Vc) 3.3V LVCMOS 5.0V HCMOS / Sinewave Minimum Nominal Maximum Units -55 - 125 °C Notes -0.5 -0.5 - - 4.5 7.0 Vdc Vdc -0.5 -0.5 - - 4.5 7.0 Vdc Vdc Maximum Units Notes ppm ppb ppb ppb ppm ppm 1, 4, 9, 2 3 4 Operating Specifications Parameter Minimum Nominal Frequency Calibration -0.3 - 0.3 Frequency Stability *05: ±5; 10: ±10; 20: ±20; 50: ±50; 100: ±100 Frequency vs Change in Supply Voltage -10 - 10 Aging Daily -5 - 5 Aging 1st Year -0.3 - 0.3 Total Frequency Tolerance (20 years) -1.5 - 1.5 Supply Voltage (Vcc) 3.3V LVCMOS 3.13 3.3 3.47 5.0V HCMOS / Sinewave 4.75 5.0 5.25 Supply Power (0 to 70°C) - - 1.4 Supply Power (-40 to 85°C) - - 2.2 Phase Jitter (BW = 10KHz to Fo/2) - - 1 Period Jitter - - 5 Allan Variance (1 second) - 5.0E-11 - SSB Phase Noise at 10Hz offset - -100 - SSB Phase Noise at 100Hz offset - -120 - SSB Phase Noise at 1kHz offset - -140 - SSB Phase Noise at 10kHz offset - -150 - Start-Up Time Oscillator - - 35 Warm-Up Time - - 3 5, 10 Vdc Vdc Watts Watts ps RMS ps RMS dbc/Hz dbc/Hz dbc/Hz dbc/Hz ms Minutes 6 6 6 6 7 OCVCXO Characteristics Parameter Control Voltage Range:(Vc) 3.3V LVCMOS 5.0V HCMOS / Sinewave Frequency 3.3V LVCMOS at Vc=0.3 Vdc 3.3V LVCMOS at Vc=3.0 Vdc 5.0V HCMOS /Sinewave at Vc=0.5Vdc 5.0V HCMOS /Sinewave at Vc=4.5Vdc Slope of Frequency Adjust 3.3V LVCMOS 5.0V HCMOS /Sinewave Imput Impedance Minimum Nominal Maximum Units Notes 0.30 0.50 1.65 2.50 3.0 4.50 Vdc Vdc - 5 - 5 -7 7 -7 7 -5 - -5 - ppm ppm ppm ppm 8 8 8 8 3.7 2.5 100K - - - - - - ppm/V ppm/V Ohms 1. Initial calibration @ 25C. OCVCXO model Vc = Nominal. 2. Frequency stability vs. Change in temperature, referenced to 25C. 3. Frequency stability per 5% change in supply voltage. 4. At the time of shipment after 48 hours of operation. 5. Inclusive of calibration, operating temperature range, supply voltage change, shock and vibration 20 years aging, OCVCXO models Vc = Nominal. 6. Typical phase noise, results will vary depending on center frequency. The phase noise shown are typical for 20 MHz. 7. Measured @ 25C, within 3 minutes, the unit will be within +/-0.1ppm of its reference frequency, measured after 30 minutes of continuous operation at a stable 25C. 8. OCVCXO models pullability referenced to Fo @ 25°C, Positive Transfer Characteristics 9. Initial calibration @ 25C. OCVCXO model Vc = Nominal. 10. Inclusive of calibration, operating temperature range, supply voltage change, shock and vibration 20 years aging, OCVCXO models Vc = Nominal. Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2019 The Connor-Winfield Corporation Not intended for life support applications. Bulletin Page Revision Date Cx259 2 of 4 07 15 Oct 2019 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com LVCMOS Output Characteristics Parameter Minimum Nominal Maximum Units - 15 - pF 2.60 - - - - 0.40 Vdc Vdc Vcc-0.5 - - - - 0.40 Vdc Vdc -4 - 45 - - - 50 - - 4 55 6.5 mA mA % ns Load Voltage: 3.3V LVCMOS High (Voh) Low (Vol) Voltage: 5.0V HCMOS High (Voh) Low (Vol) Current High (loh) Low (lol) Duty Cycle at 50% of Vcc Rise / Fall Time: 10% to 90% Notes Sinewave Output Characteristics Parameter Minimum Nominal Maximum Units - 50 - Ohms 3 6 - - - - - - - - -30 -80 dBm dBm dBc dBc Load Output Power (Vcc=3.3V) (Vcc=5.0V) Harmonics Spurious Notes Package Characteristics OH4-Series DIP Package 14 Pin DIP Hermetically Sealed Grounded Welded Package 14 Pin DIP Package Environmental Characteristics ENVIRONMENTAL CHARACTERISTICS Temperature Cycle: Per MIL-STD-883, Method 1010, Condition B. -55°C to 125°C, 300 cycles,1 0 minute dwell, 1minute transition. Gross Leak Test: Per MIL-STD-202, Method 112, Condition D. No Bubbles in flourinert (FC-43) at125°C ±5°C for 20 seconds SOLDERING Pin Solderability: Per MIL-STD-883, Method 2003. 8 hour steam age prior to 254°C ±5°C Solder ot dip, 95% Coverage. Resistance to Solder Heat: Per MIL-STD-202, Method 210, Condition C. Wave: Topside board-mount product. 260°C ±5°C for 20 seconds MECHANICAL CHARACTERISTICS Vibration: Per MIL-STD-202, Method 204, Condition A. 10G’s peak, 10Hz to 500Hz, 15 minute cycles 12 times each perpendicular axis. Shock: Per MIL-STD-202, Method 213, Condition F 1500G’s, 0.5ms, half sine, 3 shocks per direction. Moisture Resistance: Per MIL-STD-202, Method 106. 95% RH @ 65°C, 10 cycles 10°C to 65°C. Test Circuit CMOS Output Waveform 90% 14 8 1 7 50% * OCXO = N/C OCVCXO = VC 10% Bulletin * 15 pF for CMOS Load 50 Ohms for Sinewave Load Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2019 The Connor-Winfield Corporation Not intended for life support applications. Page Revision Date Cx259 3 of 4 07 15 Oct 2019 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com OH4610LF-020.0M MTIE per Stratum 3E (OCXO is covered) Loop Bandwidth = 0.0016 Hz OH4610LF-020.0M TDEV per Stratum 3E (OCXO is covered) Loop Bandwidth = 0.0016 Hz Revision History Revision 00 06 07 Date 09/30/14 08/08/19 10/15/19 Note New issue Added ±100ppb Frequency Stability Added ±25ppb Frequency Stability Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2019 The Connor-Winfield Corporation Not intended for life support applications. Bulletin Page Revision Date Cx259 4 of 4 07 15 Oct 2019