2204-12-311

2200 SERIES REED RELAYS 2200 Series Reed Relays Ideally suited to the needs of Automated Test Equipment and RF requirements. The specification tables allow you to select the appropriate relay for your particular application. If your requirements differ, please consult your local representative or Coto’s Factory. 2200 Series Features u Very small footprint (0.17 in 2), high reliability reed relays u High Insulation Resistance - 1012 Ω available with model 2204 u High speed switching compared to electromechanical relays u Hermetically sealed contacts for long life u Epoxy coated steel shell provides magnetic shielding u Optional Electrostatic Shield for reducing capacitive coupling u Optional Coaxial Shield for 50Ω impedance and switching of fast rise time digital pulses offered on Form A u Relay models 2200-2301, 2200-2302 are ATE industry standards u Specifically engineered for OEM designs and maintenance of existing production fixtures u RoHS compliant DIMENSIONS in Inches (Millimeters) .810 (20.57) .210 (5.33) .225 (5.72) .020 (0.51) .500 (12.7) .100 (2.54) .125 (3.18) .700 (17.78) .018 Dia. pins (0.46) 1 2 3 4 8 7 6 5 Bottom View Ordering Information NOTE u Model #’s 2200-2301 & 2200-2302 represent complete part numbers. Part Number Model Number 2204 Coil Voltage 2211 05=5 volts 12=12 volts XXXX-XX-XX1 Coil Options 3=use for Model #2204 (12 volt coil) and Model #2211 (5 & 12 volt coil) 4=use for Model #2204 (5 volt coil) Shielding Options2 0=No Shielding 1=Electrostatic Shield (N/A on Model #2211) 2=Coaxial Shield (N/A on Model #2211) 07082013 tel: (401) 943.2686 | fax: (401) 942.0920 2204 2211 Units 1 Form A 1 Form C 22002301 1 Form A Electrostatic Shield Coaxial Shield VDC 5 12 5 12 5 5 MODEL NUMBER Parameters Test Conditions 22002302 1 Form A COIL SPECS. Nom. Coil Voltage Coil Resistance +/- 10%, 25° C Ω 370 1500 230 1500 150 150 Operate Voltage Must Operate by VDC - Max. 3.8 9.0 3.8 9.0 3.6 3.6 Release Voltage Must Release by VDC - Min. 0.4 1.0 0.4 1.0 0.5 0.5 Switching Voltage Max DC/Peak AC Resist. Volts 200 100 150 150 Switching Current Max DC/Peak AC Resist. Amps 0.5 0.25 0.5 0.5 Carry Current Max DC/Peak AC Resist. Amps 1.0 0.5 1.0 1.0 Contact Rating Max DC/Peak AC Resist. Watts 10 3 10 10 Signal Level 1.0V, 10mA x 10 Ops. 500 100 500 500 x 10 Ops. 5 5 5 5 CONTACT RATINGS Life Expectancy-Typical 1 Rated Loads 6 6 Static Contact Resistance (max. init.) 50mV, 10mA Ω 0.100 0.150 0.150 0.150 Dynamic Contact Resistance (max. init.) 0.5V, 50mA at 100 Hz, 1.5 msec Ω 0.200 0.200 0.200 0.200 Insulation Resistance (minimum) Between all Isolated Pins at 100V, 25°C, 40% RH Ω 1012 1011 1011 1011 Capacitance - Typical Across Open Contacts Shield Floating Shield Guarding pF pF 0.9 0.2 0.9 N/A 0.9 0.2 0.9 0.2 Dielectric Strength (minimum) Between Contacts Contacts to Shield Contacts/Shield to Coil VDC/peak AC VDC/peak AC VDC/peak AC 250 250 1500 200 N/A 1500 250 250 1500 250 250 1500 Operate Time including bounce At Nominal Coil Voltage, 30 Hz Square Wave msec. 0.5 (typ.) 1.0 (typ.) 0.55 (max.) 0.55 (max.) msec. 0.1 2.0 0.1 0.1 RELAY SPECIFICATIONS Release Time - Typical Top View: Dot stamped on top of relay refers to pin #1 location Grid = .1”x.1” (2.54mm x 2.54mm) 5 6 4 3 5 6 4 3 5 6 4 3 5 6 4 3 7 8 2 1 7 8 2 1 7 8 2 1 7 8 2 1 Notes: 1 2 Consult factory for life expectancy at other switching loads. Model 2204, pin #7 is tied to optional electrostatic shield, pins #6 & #7 are tied to optional coaxial shield. Environmental Ratings: Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C; Solder Temp: 270°C max; 10 sec. max All electrical parameters measured at 25°C unless otherwise specified. Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s 07082013 For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC.