9002-05-10

9000 SERIES/MOLDED SIP REED RELAYS 9000 Series High Performance SIP Reed Relays The SIP relay is the industry standard when high reliability and consistent performance are desired in a compact package. The 9001 and 9002 are high performance relays ideally suited for Automatic Test Equipment, Instrumentation, RF and Telecommunications applications. The specification tables allow you to select the appropriate relay for your application. 9000 Series Features u High Insulation Resistance - 1012 Ω minimum (1013 Ω typical) u High reliability, hermetically sealed contacts for long life (tested up to 1 Billion Operations) u High dielectric strength available, consult factory u High speed switching compared to electromechanical relays u Molded thermoset body on integral lead frame design u Coaxial Shield for 50Ω impedance and switching of fast rise time digital pulses - 9002 only u Optional Coil Suppression Diode - protects coil drive circuits u UL File #E67117, CSA File #028537 - Contact factory for details u RoHS compliant DIMENSIONS in Inches (Millimeters) Model 9001 .760 Max (19.3) .780 Max. (19.8) w/Shell .133 (3.4) Max. .020 (0.5) .020 REF. (0.51) .200 (Typ.) (5.08) Model 9002 .300 Max (7.6) .320 Max. (8.1) w/Shell .010 (0.25) .200 Max (5.08) .222 Max. (5.64) w/Shell .760 Max (19.3) .780 Max. (19.8) w/Shell .200 Max (5.08) .222 Max. (5.64) w/Shell .020 (0.5) .133 (3.4) Max. .100 (Typ.) (2.54) .200 (Typ.) (5.08) .200 Max (5.08) .222 Max. (5.64) w/Shell .020 (0.5) .200 (Typ.) (5.08) .020 REF. (0.51) .300 Max (7.6) .320 Max. (8.1) w/Shell .133 (3.4) Max. .010 (0.25) NOTE u .010 (0.25) 30o Alternate Package .760 Max (19.3) .780 Max. (19.8) w/Shell .300 Max (7.6) .320 Max. (8.1) w/Shell For RF Graph Performance, see “RF Graphs” section of the Reed Relay Technical & Application Information Ordering Information Part Number Model Number 9001 9002 Coil Voltage 05=5 volts 12=12 volts 90XX-XX-XX General Options 0 = No Diode 1 = Diode2 Magnetic Shield Option 0 = No Shield 1 = Shield 07082013 tel: (401) 943.2686 | fax: (401) 942.0920 MODEL NUMBER Parameters COIL SPECS. Test Conditions Units 90012 90022 4 Pin SIP 6 Pin SIP Nom. Coil Voltage VDC 5 12 5 12 Max. Coil Voltage VDC 6.5 15.0 6.5 15.0 +/- 10%, 25° C Ω 500 1000 350 750 Operate Voltage Must Operate by VDC - Max. 3.75 9.0 3.75 9.0 Release Voltage Must Release by VDC - Min. 0.4 1.0 0.4 1.0 Coil Resistance CONTACT RATINGS Switching Voltage Max DC/Peak AC Resist. Volts 200 200 Switching Current Max DC/Peak AC Resist. Amps 0.5 0.5 Carry Current Max DC/Peak AC Resist. Amps 1.5 1.5 Contact Rating Max DC/Peak AC Resist. Watts 10 10 Life Expectancy-Typical1 Signal Level 1.0V, 10mA x 106 Ops. 1000 1000 Static Contact Resistance (max. init.) 50mV, 10mA Ω 0.150 0.150 Dynamic Contact Resistance (max. init.) 0.5V, 50mA at 100 Hz, 1.5 msec Ω 0.200 0.200 Insulation Resistance (minimum) Between all Isolated Pins at 100V, 25°C, 40% RH Ω 1012 1012 Capacitance - Typical Across Open Contacts No Shield Shield Floating Shield Guarding pF pF pF 0.7 - 0.8 0.1 Open Contact to Coil No Shield Shield Floating Shield Guarding pF pF pF 1.4 - 1.4 0.5 Contacts Open, Shield Floating pF - 1.4 Dielectric Strength (minimum) Between Contacts Contacts to Coil Contacts/Shield to Coil VDC/peak AC VDC/peak AC VDC/peak AC 300 1500 300 1500 1500 Operate Time - including bounce - Typical At Nominal Coil Voltage, 30 Hz Square Wave msec. 0.35 0.35 msec. 0.1 0.1 RELAY SPECIFICATIONS Contact to Shield Release Time - Typical Top View: Dot stamped on relay refers to pin #1 Grid = .1”x.1” (2.54mm x 2.54mm) 1 2 3 4 1 5 2 3 6 4 Notes: Consult factory for life expectancy at other switching loads. Resistance >0.5Ω defines end of life or failure to open. 2 Optional diode is connected to pin #2(+) and pin #3(-). Correct coil polarity must be observed. 1 Environmental Ratings: Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C; Solder Temp: 270°C max; 10 sec. max All electrical parameters measured at 25°C unless otherwise specified. Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. 07082013