CLM3A-WKW-CWAXA453

Cree® PLCC2 1-in-1 SMD LED CLM3A-WKW/MKW Data Sheet SMD LEDs are packaged in the industry-standard package. These LEDs have high-reliability performance and are designed to work under a wide range of environmental conditions. This high-reliability feature makes them ideally suited to be used under illumination-application conditions. Its wide viewing angle makes CLM3A-WKW/MKW LEDs ideally suited for channel letter or general backlighting and illumination applications. The flat-top emitting surface makes it easy for these LEDs to mate with light pipes. FEATURES • • Size (mm): 2.7 x 2.0 Color Temperatures (K): » CLM3A-WKW: Min.(4600) / Typical (5500) » CLM3A-MKW: Min.(2500) / Typical (3200) CRI » Typical CRI for Cool White is 72 » Typical CRI for Warm White is 80 Viewing Angle: 120 degrees Luminous Intensity (mcd): » Cool White (1120 - 2240) » Warm White (900 - 2240) Lead-Free RoHS Compliant APPLICATIONS • • • Light Strip Channel Letter Backlight • • • • • D-CT1041. Data Sheet: CL 001 Subject to change without notice. www.cree.com/ledlamps 1 Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Cool/Warm Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Junction Temperature Note Unit IF IFP VR PD Topr Tstg TJ 25 100 5 100 -40 ~ +100 -40 ~ +100 110 mA mA V mW °C °C °C Note: Pulse width ≤0.1 msec, duty cycle ≤1/10. Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Forward Voltage Reverse Current Luminous Flux Color Cool/Warm Cool/Warm Cool Warm Cool Warm Cool Chromaticity Coordinates Warm y 50% Power Angle Junction/Solder Point Cool/Warm Cool/Warm 2θ½ RTHJS Symbol VF IR ΦV ΦV IV IV x y x Condition IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA deg °C/W Unit V A mlm mlm mcd mcd 1120 900 4000 3900 1600 1400 0.3325 0.3411 0.4234 0.3990 120 350 Minimum Typical 3.2 Maximum 4.0 10 Luminous Intensity Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 CLD-CT1041.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Intensity Bin Limit (IF = 20 mA) Cool White Bin Code Wa Wb Xa Min.(mcd) 1120 1400 1800 Max.(mcd) 1400 1800 2240 Warm White Bin Code Vb Wa Wb Xa Min.(mcd) 900 1120 1400 1800 Max.(mcd) 1120 1400 1800 2240 Tolerance of measurement of luminous Intensity is ±10% VF Bin Limit (IF = 20 mA) Cool White Bin Code 27 28 29 2a 2b 2c Min.(V) 2.8 3.0 3.2 3.4 3.6 3.8 Max.(V) 3.0 3.2 3.4 3.6 3.8 4.0 Warm White Bin Code 27 28 29 2a 2b 2c Min.(V) 2.8 3.0 3.2 3.4 3.6 3.8 Max.(V) 3.0 3.2 3.4 3.6 3.8 4.0 Tolerance of measurement of VF is ±0.05 V Color Bin Limit (IF = 20 mA) Cool White Bin Code Subbin x 0.2545 Wa 0.2633 0.2545 0.2450 0.2633 Wb 0.2720 0.2640 0.2545 0.2545 Wc 0.2640 0.2720 0.2633 0.2633 Wd 0.2720 0.2800 0.2720 y 0.2480 0.2410 0.2245 0.2290 0.2410 0.2340 0.2200 0.2245 0.2480 0.2670 0.2575 0.2410 0.2410 0.2575 0.2480 0.2340 Wh Wg W2 Wf We Bin Code Subbin x 0.2640 0.2735 0.2808 0.2720 0.2720 0.2808 0.2880 0.2800 0.2735 0.2830 0.2895 0.2808 0.2808 0.2895 0.2960 0.2880 y 0.2670 0.2860 0.2740 0.2575 0.2575 0.2740 0.2620 0.2480 0.2860 0.3050 0.2905 0.2740 0.2740 0.2905 0.2760 0.2620 Wn W3 Wk Wj Bin Code Subbin x 0.2830 0.2950 0.2998 0.2895 0.2895 0.2998 0.3045 0.2960 0.2950 Wm 0.3070 0.3100 0.2998 0.2998 0.3100 0.3130 0.3045 y 0.3050 0.3210 0.3028 0.2905 0.2905 0.3028 0.2865 0.2760 0.3210 0.3370 0.3150 0.3028 0.3028 0.3150 0.2970 0.2865 W1 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 3 CLD-CT1041.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Color Bin Limit (IF = 20 mA) Cool White Bin Code Subbin x 0.3070 Wp 0.3185 0.3200 0.3100 0.3100 Wq 0.3200 0.3215 0.3130 0.3185 Wr 0.3300 0.3300 0.3200 0.3200 Ws 0.3300 0.3300 0.3215 y 0.3370 0.3485 0.3270 0.3150 0.3150 0.3270 0.3075 0.2970 0.3485 0.3600 0.3390 0.3270 0.3270 0.3390 0.3180 0.3075 Ww Wv W5 Wu Wt Bin Code Subbin x 0.3300 0.3455 0.3443 0.3300 0.3300 0.3443 0.3430 0.3300 0.3455 0.3610 0.3585 0.3443 0.3443 0.3585 0.3560 0.3430 y 0.3600 0.3725 0.3535 0.3390 0.3390 0.3535 0.3345 0.3180 0.3725 0.3850 0.3680 0.3535 0.3535 0.3680 0.3510 0.3345 W4 Tolerance of measurement of the color coordinates is ±0.01 Warm White Bin Code Subbin x 0.3610 Ma 0.3576 0.3751 0.3820 0.3576 Mb 0.3541 0.3682 0.3749 0.3820 Mc 0.3751 0.3926 0.4030 0.3751 Md 0.3682 0.3822 0.3926 y 0.3900 0.3651 0.3783 0.4075 0.3651 0.3401 0.3491 0.3781 0.4075 0.3783 0.3915 0.4250 0.3783 0.3491 0.3580 0.3915 Mh Mg M2 Mf Me Bin Code Subbin x 0.4030 0.3926 0.4118 0.4260 0.3926 0.3822 0.3976 0.4118 0.4260 0.4118 0.4310 0.4490 0.4118 0.3976 0.4129 0.4310 y 0.4250 0.3915 0.4021 0.4390 0.3915 0.3580 0.3653 0.4021 0.4390 0.4021 0.4128 0.4530 0.4021 0.3653 0.3725 0.4128 Mn M3 Mk Mj Bin Code Subbin x 0.4490 0.4310 0.4572 0.4785 0.4310 0.4129 0.4359 0.4572 0.4785 Mm 0.4572 0.4834 0.5080 0.4572 0.4359 0.4588 0.4834 y 0.4530 0.4128 0.4203 0.4625 0.4128 0.3726 0.3782 0.4203 0.4625 0.4203 0.4279 0.4720 0.4203 0.3782 0.3838 0.4279 M1 Tolerance of measurement of the color coordinates is ±0.01 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 4 CLD-CT1041.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps CIE Chromaticity Diagram 0.5300 0.4700 M3 Mm Mj Mg 0.4100 0K 500 M Me Mn Mc Mk Mf Mh 60 00 K W 5 Ma W v Mb Md 1 M 70 00 K 4 W W r W t 0.3500 80 00 K 10 00 9 0K 00 0K W y w 3000K W u W W m W 3 p W s 3500K 4000K W W j W W W h W k n q W 0.2900 2 g W e W f 1 W W c W d W 0.2300 a W b 0.1700 0.1700 0.2300 0.2900 0.3500 x 0.4100 2 2700K 2500K 0.4700 0.5300 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 5 CLD-CT1041.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Order Code Table* Luminous Intensity (mcd) Min. Cool White Cool White CLM3A-WKW-CWaXa153 CLM3A-WKW-CWaXa453 120 120 1120 1120 Max. 2240 2240 W1,W2,W3,W4,W5 W4,W5 Color Kit Number Viewing Angle Color Bin Code Color Warm White Warm White Warm White Warm White Warm White Kit Number CLM3A-MKW-CVbXa133 CLM3A-MKW-CVbXa233 CLM3A-MKW-CVbXa513 CLM3A-MKW-CWaXa233 CLM3A-MKW-CWaXa513 Viewing Angle 120 120 120 120 120 Luminous Intensity (mcd) Min. 900 900 900 1120 1120 Max. 2240 2240 2240 2240 2240 Color Bin Code M1,M2,M3 M2,M3 W5,M1 M2,M3 W5,M1 Notes: • The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color-bin codes will not be orderable. • Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. • Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 6 CLD-CT1041.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs 50.0 40.0 30.0 20.0 10.0 IF (mA) (RELATIVE LUMINOUS INTENSITY) 5.0 4.0 3.0 2.0 1.0 0.0 2.8 3.0 3.2 3.4 3.6 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. VF(V) 3.8 0.0 0 IF(mA) 10 20 30 40 50 FIG.2 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT Vr(V) -50 -40 -30 -20 -10 0 (RELATIVE LUMINOUS INTENSITY) 0 -10 -20 -30 -40 100% 80% 5000K - 10000K CCT 60% 40% 20% 0% 400 450 500 550 600 650 700 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. WL(nm) 750 3700K - 5000K CCT 2600K - 3700K CCT FIG.3 REVERSE CURRENT VS. REVERSE VOLTAGE. -50 Ir(uA) IF(mA) 50 40 30 50% Power Angle : 120 (RELATIVE LUMINOUS INTENSITY) 0 1.0 0.5 20 Rth j-a=450 C/W 10 Ta( C) 40 20 60 80 100 0 FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=110 C) 0 0 -90 Angle -60 -30 0 30 60 90 FIG.6 FAR FIELD PATTERN The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 7 CLD-CT1041.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Mechanical Dimensions All dimensions are in mm. Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 8 CLD-CT1041.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 9 CLD-CT1041.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Packaging • • • • • The boxes are not water-resistant, and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 2500 pcs per reel. CARRIER TAPE PACKAGE MARKING 1.5 4.0 1.75 3.5 2.25 4.0 T APE FEED DIRECTION COVER TAPE REEL(178x8mm) 3.3 8.0 Label HUMIDITY INDICATOR HUMICHECK H UMIDITY IN DICA TOR DAN GE R US O DO N O T EAT DESICCANT w ww .vitapac.com V102 Label POLYETHYLENE BAG Label A CARTON (240x220x35mm) Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 10 CLD-CT1041.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps