CLP6C-AKW-CYBB0AA3

Cree® PLCC6 3-in-1 SMD LED CLP6C-RKW/AKW Data Sheet These SMD LEDs are packaged in an industry-standard PLCC6 package. These high-reliability and high-brightness LEDs are designed to work in a wide range of environmental conditions and are ideally suited for use in illumination applications. Their wide viewing angle makes these LEDs ideally suited for channel-letter or general-backlighting and illumination applications. The flat-top emitting surface makes it easy for these LEDs to mate with light pipes. FEATURES • • Size (mm): 6.0 x 5.0 Color and Typical Dominant Wavelength (nm): » Red (618-630) » Amber (584-596) Luminous Intensity (mcd): » CLP6C-RKW (3550-7100) » CLP6C-AKW (3550-9000) Viewing Angle: 120 degrees Lead-Free RoHS-Compliant APPLICATIONS • • • Light Strip Channel Letter Backlight • • • • 0 LD-CT1183.00 Data Sheet: C Subject to change without notice. www.cree.com/ledlamps 1 Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Red/Amber Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Junction Temperature Junction/Ambient Junction/Solder Point Electrostatic Discharge Classification(MIL-STD-883E) Note Unit IF IFP VR PD Topr Tstg TJ RTHJA RTHJS ESD 3 x 80 3 x 200 5 3 x 240 -40 ~ +100 -40 ~ +100 110 3 x 250 3 x 150 Class 2 mA mA V mW °C °C °C °C/W °C/W Note: 1. Pulse width ≤0.1 msec, duty ≤1/10. Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Forward Voltage Reverse Current Dominant Wavelength Color Red/Amber Red/Amber Red Amber Red Amber Red/Amber Symbol VF IR λD λD IV IV 2θ½ Condition IF = 50 mA VR = 5 V IF = 3 x 50 mA IF = 3 x 50 mA IF = 3 x 50 mA IF =3 x 50 mA IF = 3 x 50 mA Unit V μA nm nm mcd mcd deg 618 584 3550 3550 624 591 4800 5000 120 Minimum Typical 2.4 Maximum 3.0 10 630 596 Luminous Intensity 50% Power Angle Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 CLD-CT1183.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Intensity Bin Limit (IF = 3 x 50 mA) Red (CLP6C-RKW) Bin Code Yb Z0 A0 Min. (mcd) 3550 4500 5600 Max. (mcd) 4500 5600 7100 Amber (CLP6C-AKW) Bin Code Yb Z0 A0 B0 Min. (mcd) 3550 4500 5600 7100 Max. (mcd) 4500 5600 7100 9000 Tolerance of measurement of luminous intensity is ±10%. Color Bin Limit (IF = 3 x 50 mA) Red Bin Code RA Min. (nm) 618 Max. (nm) 630 Amber Bin Code AA Min. (nm) 584 Max. (nm) 596 Tolerance of measurement of dominant wavelength is ±1 nm. Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 3 CLD-CT1183.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Order Code Table* Red Luminous Intensity (mcd) Color Red Red Kit Number CLP6C-RKW-CYbA0AA3 CLP6C-RKW-CZ0A0AA3 Viewing Angle 120 120 Min. 3550 4500 Max. 7100 7100 Color Bin RA RA Dominant Wavelength Min. (nm) 618 618 Color Bin RA RA Max. (nm) 630 630 Amber Luminous Intensity (mcd) Color Amber Amber Kit Number CLP6C-AKW-CYbB0AA3 CLP6C-AKW-CZ0B0AA3 Viewing Angle 120 120 Min. 3550 4500 Max. 9000 9000 Color Bin AA AA Dominant Wavelength Min. (nm) 584 584 Color Bin AA AA Max. (nm) 596 596 Notes: • The above kit numbers represent order codes which include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin codes and single colorbin codes will not be orderable. • Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. • Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 4 CLD-CT1183.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs (RELATIVE LUMINOUS INTENSITY) 2.5 2.0 Red 100.0 80.0 60.0 40.0 20.0 0.0 IF (mA) Yellow 1.5 Red 1.0 0.5 Yellow 1.8 2.0 2.2 2.4 2.6 2.8 VF(V) 0.0 0 20 40 60 80 IF(mA) 100 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Vr(V) -50 -40 -30 -20 -10 0 FIG.2 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT (RELATIVE LUMINOUS INTENSITY) 0 -10 -20 -30 -40 100% 80% Amber Red 60% 40% 20% 0% 300 400 500 600 700 WL(nm) 800 900 -50 Ir(uA) FIG.3 RED &YELLOW REVERSE CURRENT VS. REVERSE VOLTAGE. IF(mA) 100 80 60 40 20 0 0 20 40 60 80 Ta( C) 100 Rth j-s=150 C/W FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. 50% Power Angle : 120 (RELATIVE LUMINOUS INTENSITY) 0 1.0 0.5 Rth j-a=250 C/W 0 -90 -60 -30 0 30 60 90 Angle FIG.5 RED &YELLOW MAXIMUM FORWARD DCCURRENT VS AMBIENT TEMPERATURE (Tjmax=110 C) FIG.6 FAR FIELD PATTERN The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 5 CLD-CT1183.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Mechanical Dimensions All dimensions are in mm. Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 6 CLD-CT1183.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 7 CLD-CT1183.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Packaging • • • • • The boxes are not water-resistant, and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 900 pcs per reel. 10% 20% 30% 40% DANGEROUS DO NOT EAT DESICCANT 防潮 珠。 不可食 Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 8 CLD-CT1183.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps