CTRJGU27S1NU1026

Integrated RJ45 Magnetic Connectors ctparts.com Not shown at actual size. 10/100/1000 Gigabit Ethernet RJ45 Dual USB Combo Integrated Modular Jack CHARACTERISTICS Meets IEEE 802.3 standard 350 µH minimum OCL with 8mA DC bias current USB module complies with USB 2.0 standards RJ45 connection meets CAT3, 5e, and 6 Fast Ethernet Available with or without LEDs Minimum 1500Vrms isolation per IEEE 802.3 requirement Operating temperature 0°C to +70°C Storage temperature -40°C to +85°C RoHS Compliant CTRJGU Series Compliant RoHS PART NUMBER CONFIGURATION Series Size Code Layers Port (Each Layer) 1 LED (L/R) Tab Schematic CTRJGU 27 S = Single Transformer electrical specifications @ 25°C MATERIAL SPECIFICATION Metal Shell: Copper Alloy , Finish: 50µ" Nickel Back Cover: Copper Alloy , Finish: 50µ" Nickel Housing: Thermoplastic , UL 94V-0, Color Black Bottom Base: Nylon PA46, UL 94V-0, Color Black Terminal/Copper Alloy t= 0.40x0.50mm Thickness, 100µ” Tin-Lead on Solder, Both over 50µ” Nickel Under-Plated Insert: Thermoplastic , UL 94V-0, Color Black Contact Terminal / Phosphor Bronze, 15µ" Gold on Contact Area, 100µ" Tin on Solder, Both over 50µ", Nickel Under-Plated Coil Base: Phenolic, UL 94V-0, Color Black N = None G = Green Y = Yellow O = Orange U = Up 1033,1026 CTRJGU 27 S 1 GOYN U 1033 LED CONFIGURATION Schematic Standard LED Yellow 1033 Green Orange Wavelength (λ) 585nm 570nm 605nm V / IF= 20 mA Image Max. 2.5V 2.5V 2.5V V / IF= 20 mA Image Max. 2.5V 2.5V 2.5V Typ. 2.1V Left LED P14 P13 250 Typ. 2.1V Left LED P15 P14 P13 Orange 2.1V Yellow Right LED P12 P11 Green 2.1V Schematic Standard LED Yellow Wavelength (λ) 585nm 570nm 605nm 1026 Green Orange 2.1V P12 Right LED Green Yellow Green P11 250 2.1V 12.07.06 Technologies Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice CENTRAL Integrated RJ45 Magnetic Connectors ctparts.com CTRJGU Series ORDERING INFO Part Number CTRJGU27S1GOYNU1033 CTRJGU27S1GNGYU1026 Data Rate Turns Ratio TX/RX 1CT:1 1CT:1 LEDs (L/R) GOYN GNGY Insertion Loss Return Loss 100Ω ± 15Ω (dB max.) (dB min.) 1-125MHz 1-30MHz 30-60MHz 60-80MHz -1.2 -1.2 -18 -18 -16 -16 -12 -12 Cross Talk (dB min.) 1-30MHz 30-60MHz 60-100MHz -40 -40 -35 -35 -30 -30 C.M.R. Hi-pot (dB min) (Vrms) 1-60MHz 60-100MHz 60Hz/1min. -40 -40 -30 -30 1500 1500 10/100/1000 10/100/1000 SCHEMATICS 1033 1026 Shield P1 P2 0.01uF 1000pF/2KV P1 P2 J1 75 P3 J2 J3 0.1uF 75 J6 J4 0.1uF J4 75 J5 J7 0.1uF 75 J8 J2 J3 0.1uF 75 J1 P3 P4 0.01uF P4 75 P5 J6 P5 P6 P7 0.01uF P6 75 J5 J7 P7 P8 P8 P9 0.01uF 75 J8 P9 P10 P10 Shield 1500pF/2KV 12.07.06 Technologies Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice CENTRAL Integrated RJ45 Magnetic Connectors ctparts.com CTRJGU Series MECHANICAL CTRJGU27S1GOYNU1033 Lift LED Right LED EMI Fingers 26.12 J8 J1 EMI Fingers 30.62 19.54 (12.70) 29.72 16.13 14.46 Ø1.00x5 9.38 2.03 1.14 0.37 2.62 7.95 5.22 14.30 3.67 17.42 (4.13) Ø0.90x10 2.45 14.35 8.20 0.25x0.62 1 5 2 6 3 7 4 8 0.40x0.50 Ø2.31x4 7.00 Ø1.57x4 8.13 13.13 3.56 P10 P6 P15 P14 P13 P7 P1 P12 P11 2.00 2.50 Ø1.00x8 0.50x0.50 NOTES : 1. Tolerance : PCB ±0.05mm Connecetor ±0.25mm 2. Connector dimensions comply with FCC 68.5 dimension requirements Suggested PCB Pad Layout Component Side View 12.07.06 Technologies Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice CENTRAL 10.62 5.69 2.90 2.45 4.20 Integrated RJ45 Magnetic Connectors ctparts.com CTRJGU Series MECHANICAL CTRJGU27S1GNGYU1026 Lift LED Right LED 27.30 J8 J1 19.24 (12.70) 31.00 14.38 9.30 Ø1.00x4 Ø0.90x10 10.69 2.54 1.27 7.85 5.42 15.32 3.67 19.10 (4.40) 18.08 12.77 10.92 1 5 2 6 3 7 4 8 P9 P1 7.00 P10 P14 P2 Ø2.31x8 0.40x0.50 2.62 13.13 18.70 Suggested PCB Pad Layout Component Side View Ø1.00x8 P13 P12 P11 0.50x0.50 NOTES : 1. Tolerance : PCB ±0.05mm Connecetor ±0.25mm 2. Connector dimensions comply with FCC 68.5 dimension requirements 12.07.06 Technologies Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice CENTRAL 2.62 2.00 5.33 0.25x0.62 8.31 12.67 15.31 3.00 2.76 4.20