218-10LPSTR

Series 218 Half Pitch, SMD DIP Switch  Removable tape seal to withstand IR vapor phase or wave soldering temperatures, and board washing  Gull-wing and “J”bend terminal configurations  Low profile actuators prevent accidental actuation  SPST configuration available  0.6mm/.024” actuator travel  Optional top tape seal for board spray washing Description Positive detent separated from contactor causes contactor does not deflect during actuation. Unique compact type design allows to be used at mini size application. Optional sealed structure is optimized for board washing during soldering process. It makes it the ideal choice for any server, security and HVAC systems Ordering Information Series Number of Switch Positions 21820212124 Code 2 4 6 8 10 12 Low Profile B Actuator 12 1 Bottom Epoxy Seal Top Tape Seal Terminal Type Packaging Type Actuation Preset S T J R F LP 2 1 No. of switch positions 2 positions 4 positions 6 positions 8 positions 10 positions 12 positions E Code Blank T Top tape seal No top tape seal Top tape seal Code Blank R Code Spec. Blank J Gull wing terminal J bend terminal Spec. Anti-static tube packaging Tape & reel packaging Code Spec. Blank Ship at ON position F Ship at OFF position Notes: Contact CTS for other common features not listed. 2020-7-1 Rev. B Page 1 of 6 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 218 Half Pitch, SMD DIP Switch Electrical Specifications Parameter Circuit Contact Resistance Insulation Resistance Dielectric Strength Actuation Life Switch Capacitance Conditions & Remarks SPST Initial At end of life Between insulated terminals 350 VAC between adjacent switches 25mA @ 24 VDC Between adjacent closed switches Nonswitching Rating Min 2 Max 12 100 100 100 Unit position milliohms megohms 1 minute 1,000 cycles 10 pF 100 or 50 mA or VDC Mechanical and Environmental Soldering MSL RoHS Shock Vibration Coplanarity Seal Marking Packaging: Operating Temperature Range Storage Temperature Range Maximum reflow temperature, 250°C for 30 seconds Level 1 Lead-Free. Fully compliant to RoHS Directive 2011/65/EU Per MIL-STD-202G, method 213B, condition A( 50G’s) with no contact inconsistencies greater than 1 microsecond Per MIL-STD-202G, method 204D, condition B ( .06” or 15G’s between 10 HZ to 2K HZ) with no contact inconsistencies greater than 1 microsecond 0.1mm/.004” maximum Bottom epoxy seal standard Top tape seal optional Special marking available-consult CTS Standard anti-static tube packaging Optional tape and reel packaging -55°C to +85°C -55°C to +85°C Soldering Profile 2020-7-1 Rev. B Page 2 of 6 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 218 Half Pitch, SMD DIP Switch Mechanical Specifications Figure 1 – Surface Mount J Bend Terminal Figure 2 – Surface Mount Gull Wing Terminal 2020-7-1 Rev. B Page 3 of 6 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 218 Half Pitch, SMD DIP Switch Packing: Tape and Reel Unit: mm SW Section F Fig 2 4 6 8 10 12 I I I I I I Bo W F 4.51 7.05 9.75 12.13 14.67 17.22 16.0 16.0 16.0 24.0 24.0 24.0 7.50 7.50 7.50 11.50 11.50 11.50 SPECIFIED REEL PARTS DIMENSIONS: Unit: mm SW Section F W1 2 4 6 8 10 12 16.4 16.4 16.4 24.4 24.4 24.4 W2 22.4 MAX. 22.4 MAX. 22.4 MAX. 30.4 MAX. 30.4 MAX. 30.4 MAX. W3 15.9 MIN./19.5 MAX. 15.9 MIN./19.5 MAX. 15.9 MIN./19.5 MAX. 23.9 MIN./27.4 MAX. 23.9 MIN./27.4 MAX. 23.9 MIN./27.4 MAX. W3 ( INCLUDES FLANGE DISTORTION AT OUTER EDGE) W2 ( MEASURED AT HUB ) 100 330 W1 ( MEASURED AT HUB) 2020-7-1 Rev. B Page 4 of 6 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 218 Half Pitch, SMD DIP Switch FEEDING DIRECTION 2020-7-1 Rev. B Page 5 of 6 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 218 Half Pitch, SMD DIP Switch 2020-7-1 Rev. B Page 6 of 6 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.