4600-067LF

The products listed in this catalog are only a few of the thousands of variations that TUSONIX produces. For custom component design, please contact the factory direct. Catalog 4000R7 Part 2 Revised 4/10/07 #4-40 UNC-2A Pi & C Filters Large Hex Small Hex .240 ±.020 [6.10 ±0.51] .156 ±.010 [3.96 ±0.25] .125 ±.010 [3.18 ±0.25] .220 ±.010 [5.59 ±0.25] .120 ±.005 [3.05 ±0.13] STYLE 1 .360 ±.020 [9.14 ±0.51] .140 ±.010 [3.56 ±0.25] .075 ±.005 [1.91 ±0.13] .030 MAX. [0.76 MAX.] .038 MAX. [0.96 MAX.] .410 ±.020 [10.41 ±0.51] .190 ±.020 [4.83 ±0.51] STYLE 2 # 4- 40 UNC - 2A .030 MAX. [0.76 MAX.] .060 MAX. [1.52 MAX.] .060 MAX. [1.52 MAX.] # 4- 40 UNC - 2A Drawings not to scale. 13 Capacitance Tolerance Current (A) Pi Pi --- 50 200 5500 1500 GMV -0,+100% 3 3 --- 14 5 55 42 70 70 --- C C C C C C C C C C C C C C C C C C C C C C C C C C C C 70 70 70 70 70 70 70 70 70 70 70 70 50 50 150 150 150 150 150 150 150 150 300 300 300 300 300 300 50 50 50 50 50 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 200 200 200 200 200 200 10,000 10,000 10,000 10,000 15,000 15,000 15,000 15,000 27,000 27,000 27,000 27,000 50,000 50,000 2700 2700 2700 2700 5000 5000 5000 5000 5 5 10 10 10 10 GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV MAX MAX GMV GMV GMV GMV 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 4 4 4 4 7 7 7 7 10 10 10 10 15 15 --------------- 21 21 21 21 20 20 20 20 28 28 28 28 35 35 10 10 10 10 15 15 15 15 ------- 35 35 35 35 35 35 35 35 42 42 42 42 45 45 25 25 25 25 30 30 30 30 ------- 50 50 50 50 55 55 55 55 65 65 65 65 70 70 40 40 40 40 45 45 45 45 --5 5 5 5 60 60 60 60 60 60 60 60 65 65 65 65 --50 50 50 50 55 55 55 55 --20 20 20 20 Circuit Style Lead TUSONIX Dia. Part Number Pi Configuration 1 .018 [.46] 4261-001 1 .018 [.46] 4200-012 C Configuration 2 .030 [.76] 4403-035 1 .020 [.51] 4400-005 1 .030 [.76] 4400-035 2 .020 [.51] 4403-005 1 .020 [.51] 4400-006 1 .030 [.76] 4400-036 2 .020 [.51] 4403-006 2 .030 [.76] 4403-036 1 .020 [.51] 4400-010 1 .030 [.76] 4400-040 2 .020 [.51] 4403-010 2 .030 [.76] 4403-040 1 .020 [.51] 4400-016 1 .030 [.76] 4400-041 1 .020 [.51] 4400-003 1 .030 [.76] 4400-033 2 .020 [.51] 4403-003 2 .030 [.76] 4403-033 1 .020 [.51] 4400-004 1 .030 [.76] 4400-034 2 .020 [.51] 4403-004 2 .030 [.76] 4403-034 1 .030 [.76] 4400-680 2 .030 [.76] 4403-680 1 .020 [51] 4400-008 1 .030 [.76] 4400-038 2 .020 [.51] 4403-008 2 .030 [.76] 4403-038 Capacitance (pF) inches [mm] Working Voltage (dc) 85°C 125°C Minimum No-Load Insertion Loss (dB) at 25°C per MIL-Std-220 1MHz 10MHz 100MHz 1GHz 10GHz All bushing style filters include hex nut and lock washer unless otherwise noted. 7741 North Business Park Drive Tucson, Arizona 85743 Ph: 520-744-0400 Fax: 520-744-6155 Web site: www.tusonix.com E-mail: sales@tusonix.com #4-40 UNC-2A C & L Filters TUSONIX 4400 Series Miniature EMI Filters These filters are ideal for applications where small size and high performance are critical and a threaded mounting technique is desired. Drawings not to scale. Current (A) 85°C 125°C C Configuration (Continued from page 13) 4400-009 1 .020 [.51] C 300 200 4400-039 1 .030 [.76] C 300 200 4403-009 2 .020 [.51] C 300 200 4403-039 2 .030 [.76] C 300 200 4400-000 1 .020 [.51] C 300 200 4400-030 1 .030 [.76] C 300 200 4403-000 2 .020 [.51] C 300 200 4403-030 2 .030 [.76] C 300 200 4400-001 1 .020 [.51] C 300 200 4400-031 1 .030 [.76] C 300 200 4403-001 2 .020 [.51] C 300 200 4403-031 2 .030 [.76] C 300 200 4400-007 1 .020 [.51] C 300 200 4400-037 1 .030 [.76] C 300 200 4403-007 2 .020 [.51] C 300 200 4403-037 2 .030 [.76] C 300 200 4400-002 1 .020 [.51] C 300 200 4400-032 1 .030 [.76] C 300 200 4403-002 2 .020 [.51] C 300 200 4403-032 2 .030 [.76] C 300 200 L Configuration 4400-055 1 .020 [.51] L 70 50 4400-056 1 .020 [.51] L 70 50 4400-060 1 .020 [.51] L 70 50 4400-057 1 .020 [.51] L 50 50 4400-053 1 .020 [.51] L 150 100 4400-054 1 .020 [.51] L 150 100 4400-050 1 .020 [.51] L 300 200 4400-051 1 .020 [.51] L 300 200 4400-052 1 .020 [.51] L 300 200 Capacitance Tolerance Working Voltage (dc) Capacitance (pF) Lead Dia. Circuit TUSONIX Part Number Style These C and L configured filters are available in two physical configurations and can be supplied with either unified or metric thread (see page 18 for metric). The small package and large range of electrical characteristics of the 4400 Series make it an effective solution for a variety of microwave applications. 25 25 25 25 100 100 100 100 500 500 500 500 1000 1000 1000 1000 1200 1200 1200 1200 GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 --------------------- ------------5 5 5 5 5 5 5 5 ----3 3 3 3 15 15 15 15 20 20 20 20 20 20 20 20 10 10 10 10 20 20 20 20 35 35 35 35 35 35 35 35 35 35 35 35 25 25 25 25 28 28 28 28 40 40 40 40 45 45 45 45 45 45 45 45 10,000 15,000 27,000 50,000 2700 5000 100 500 1200 GMV GMV GMV GMV GMV GMV GMV GMV GMV 10 10 10 10 10 10 10 10 10 4 7 10 15 ------ 21 25 28 35 10 15 --5 35 40 45 52 25 30 3 15 20 55 60 65 70 40 45 20 35 35 70 60 70 -55 60 33 45 50 Minimum No-Load Insertion Loss (dB) at 25°C per MIL-Std-220 1MHz 10MHz 100MHz 1GHz 10GHz Please Note: All bushing style filters include hex nut and lock washer unless otherwise noted. 14 The products listed in this catalog are only a few of the thousands of variations that TUSONIX produces. For custom component design, please contact the factory direct. #6-40 UNF-2A EMI Pi Filters inches [mm] .125 ±.015 [3.17 ±0.38] .290 ±.031 [7.37 ±0.79] .950 ±.031 [24.13 ±0.79] .290 ±.031 [7.37 ±0.79] .125 ±.015 [3.17 ±0.38] .950 ±.031 [24.13 ±0.79] # 6- 40 UNF - 2A # 6- 40 UNF - 2A .156 ±.015 [3.96 ±0.38] .156 ±.015 [3.96 ±0.38] .130 ±.015 [3.30 ±0.38] # 20 AWG. (.032) [0.81] .220 ±.015 [5.59 ±0.38] Current (A) 85°C 1 2 1 Pi Pi Pi 300 300 300 Drawings not to scale. 125°C Capacitance Tolerance Circuit Pi Configuration 4200-000 4200-002 4200-005 200 200 200 1500 1500 3000 GMV GMV GMV 10 10 10 Working Voltage (dc) Style TUSONIX Part Number STYLE 2 Capacitance (pF) STYLE 1 # 20 AWG. (.032) [0.81] .220 ±.015 [5.59 ±0.38] .130 ±.015 [3.30 ±0.38] Minimum No-Load Insertion Loss (dB) at 25°C per MIL-Std-220 10MHz 5 5 8 100MHz 1GHz 40 40 50 60 60 70 Page No. ❖ 18 18 NS 12 12 NS NS 19 NS NS NS NS NS NS NS NS 12 12 ❖ NS indicates a part that is not shown in this catalog. 15 60 60 70 Please Note: All bushing style filters include hex nut and lock washer unless otherwise noted. MIL PARTS CROSS REFERENCE MIL-PRF-15733 TUSONIX No. /28-0001 4201-501 /28-0002 4201-503 /28-0003 4251-503 /33-0001 4101-502 /33-0002 4101-503 /38-0004 4601-503 /38-0005 4601-504 /43-0001 4204-501 /43-0002 4201-506 /44-0001 4251-500 /44-0002 4205-500 /44-0003 4205-501 /46-0001 4207-500 /49-0001 4601-502 /49-0006 4601-501 /49-0007 4601-500 /51-0001 4101-504 /51-0002 4151-501 10GHz MIL-PRF-15733 TUSONIX No. /61-0001 4204-500 /61-0002 4202-501 /61-0003 4206-502 /61-0004 4206-501 /61-0005 4203-502 /61-0006 4203-501 /61-0007 4203-552 /61-0008 4201-502 /61-0009 4253-500 /61-0010 4203-553 /61-0011 4203-551 /61-0012 4253-501 /61-0013 4251-502 /61-0014 4251-501 /62-0001 4101-501 /62-0002 4100-500 /62-0003 4101-505 /62-0004 4151-500 /66-0001 4101-500 Page No. ❖ 19 20 21 21 NS 20 20 18 NS 20 20 NS NS NS 12 12 12 12 12 7741 North Business Park Drive Tucson, Arizona 85743 Ph: 520-744-0400 Fax: 520-744-6155 Web site: www.tusonix.com E-mail: sales@tusonix.com #6-32 UNC-2A Pi, C & L Filters and Feed-thru Capacitors inches [mm] .156 ±.015 [3.96 ±0.38] .156 ±.015 [3.96 ±0.38] .450 ±.031 [11.43 ±0.79] .375 ±.031 [9.53 ±0.79] .225 ±.015 [5.72 ±0.38] .125 ±.015 [3.18 ±0.38] # 20 AWG. (.032) [0.81] .070 MAX. [1.78 MAX.] .070 MAX. [1.78 MAX.] S T Y L E 2 .156 ±.015 [3.96 ± 0.38] .156 ±.015 [3.96 ±0.38] .500 ±.031 [12.7 ±0.79] .320 ±.031 [8.13 ±0.79] .225 ±.015 [5.72 ±0.38] .125 ±.015 [3.18 ±0.38] .225 ±.015 [5.72 ±0.38] # 20 AWG. (.032) [0.81] .050 ±.005 [1.27 ±0.13] # 6 - 32 UNC - 2A .500 ±.031 [12.7 ±0.79] .320 ±.031 [8.13 ±0.79] .125 ±.015 [3.18 ±0.38] # 25 AWG. (.018) [0.46] .032 ±.005 [0.81 ±0.13] # 6- 32 UNC - 2A S T Y L E 4 S T Y L E 3 .173 ±.010 [4.40 ±0.25] .358 ±.020 [9.09 ±0.50] .180 ±.010 [4.60 ±0.25] .039 [1.00] .787 ±.031 [20.00 ±0.50] .225 ±.015 [5.72 ±0.38] .039 [1.00] # 20 AWG. (.032) [0.81] .593 MAX. [15.10 MAX.] .020 ±.005 [0.50 ±0.13] .043 MAX. [1.10 MAX.] S T Y L E 5 2430 # 6- 32 UNC - 2A # 6 - 32 UNC - 2A S T Y L E 1 TUSONIX Part Number .225 ±.015 [5.72 ±0.38] .125 ±.015 [3.18 ±0.38] # 22 AWG. (.025) [0.63] .500 ±.031 [12.7 ±0.79] .320 ±.031 [8.13 ±0.79] Temperature Range Z5, Y5, X5 X7 WVDC 200 100 # 6- 32 UNC - 2A MAX. CAP. (Nominal) (pF) Notes: •• Typical Insertion Loss ∇ No Hex Nut or Lock Washer 1500 1500 Drawings not to scale. 85°C 125°C Current (A) Capacitance Tolerance Circuit Minimum No-Load Insertion Loss (dB) at 25°C per MIL-Std-220 Notes Pi Configuration 4260-001 4260-002 4260-000 C Configuration 4402-016 4402-005 4402-018 4402-680 2430-003-X5F0-101M 2430-003-X5F0-102Z L Configuration 4402-063 4402-060 Working Voltage (dc) Style TUSONIX Part Number Capacitance (pF) Please see Temperature Characteristics and EIA Codes on page 25. 1MHz 3 3 3 ---- Pi Pi Pi --400 50 50 200 5500 7500 2000 GMV GMV GMV 3 3 3 ---- 14 18 5 55 65 42 70 70 70 ---- 2 2 2 5 1 1 ---∇ •• •• C C C C C C 50 100 50 300 200 200 50 100 50 200 100 100 50,000 10,000 100,000 5 100 1000 GMV GMV GMV MAX ±20% +80-20% 10 10 10 10 5 5 15 4 22 ---- 35 21 40 --3 45 35 47 -3 20 70 50 65 -20 35 --65 -28 40 5 4 ∇ -- L L 200 100 100 100 4700 27,000 +80-20 GMV 10 10 -10 15 28 30 45 45 65 55 -- 10MHz 100MHz 1GHz 10GHz 10GHz Please Note: All bushing style filters include hex nut and lock washer unless otherwise noted. 16 The products listed in this catalog are only a few of the thousands of variations that TUSONIX produces. For custom component design, please contact the factory direct. #8-32 UNC-2A Pi, C & L Filters and Feed-Thru Capacitors inches [mm] .312 ±.031 [7.92 ±0.79] .187 ±.015 [4.75 ±0.38] .093 ±.015 [2.36 ±0.38] .890 ±.031 [22.61 ±0.79] .425 ±.031 [10.80 ±0.79] .187 ±.015 [4.75 ±0.38] .266 ±.015 [6.76 ±0.38] .266 ±.015 [6.76 ±0.38] .093 ±.015 [2.36 ±0.38] # 18 AWG. (.040) [1.02] # 20 AWG. (.032) [0.81] # 8- 32 UNC - 2A STYLE 1 .425 ±.031 [10.80 ±0.79] .187 ±.010 [4.75 ±0.25] .062 ±.005 [1.57 ±0.13] # 18 AWG. (.040)1.02] # 8- 32 UNC - 2A STYLE 2 .562 ±.031 [14.27 ±0.79] .138 ±.010 [3.50 ±0.25] # 8- 32 UNC - 2A .906 ±.031 [23.01 ±0.79] .187 ±.015 [4.75 ±0.38] .312 ±.031 [7.92 ±0.79] STYLE 3 # 8- 32 UNC - 2A STYLE 4 .312 ±.031 [7.92 ±0.79] .456 ±.093 [11.58 ±2.36] .276 MAX. [7.01 MAX.] .093 ±.010 [2.36 ±0.25] # 20 AWG. (.032) [0.81] # 8- 32 UNC - 2A STYLE 5 .225 ±.031 [5.72 ±0.79] .187 ±.015 [4.75 ±0.38] # 18 AWG. (.040) [1.02] .265 ±.031 [6.73 ±0.79] .187 ±.015 [4.75 ±0.38] # 8- 32 UNC - 2A STYLE 7 .320 ±.031 [8.13 ±0.79] .150 ±.015 [3.81 ±0.38] .500 ±.031 [12.70 ±0.79] .320 ±.015 [8.13 ±0.38] .267 ±.031 [6.78 ±0.79] .093 ±.015 [2.36 ±0.38] .328 ±.031 [8.33 ±0.79] .187 ±.015 [4.75 ±0.38] Drawings not to scale. .123 ±.015 [3.12 ±0.38] .421 ±.031 [10.69 ±0.79] .266 ±.015 [6.76 ±0.38] .328 ±.031 [8.33 ±0.79] .631 ±.031 [16.03 ±0.79] .187 ±.015 [4.75 ±0.38] .266 ±.015 [6.76 ±0.38] # 8- 32 UNC - 2A STYLE 10 .093 ±.015 [2.36 ±0.38] .421 ±.031 [10.69 ±0.79] .266 ±.015 [6.76 ±0.38] # 18 AWG. (.040) [1.02] # 16 AWG. (.051) [1.30] STYLE 11 # 8- 32 UNC - 2A # 18 AWG. (.040) [1.02] # 8- 32 UNC - 2A STYLE 9 17 .450 ±.031 [11.43 ±0.79] .266 ±.015 [6.76 ±0.38] .093 ±.015 [2.36 ±0.38] STYLE 8 # 20 AWG. (.032) [0.81] .187 ±.015 [4.75 ±0.38] .138 ±.010 [3.50 ±0.25] # 20 AWG. (.032) [0.81] # 18 AWG. (.040) [1.02] .187 ±.015 [4.75 ±0.38] .538 ±.031 [13.67 ±0.79] # 8- 32 UNC - 2A STYLE 6 .450 ±.031 [11.43 ±0.79] .266 ±.015 [6.76 ±0.38] .093 ±.015 [2.36 ±0.38] .062 ±.005 [1.57 ±0.13] .050 ±.015 [1.27 ±0.38] .216 ±.015 [5.49 ±0.38] .462 ±.031 [11.73 ±0.79] .187 ±.010 [4.75 ±0.25] .216 ±.010 [5.49 ±0.25] .475 ±.040 [12.07 ±1.02] # 20 AWG. (.032) [0.81] .093 ±.015 [2.36 ±0.38] .187 ±.010 [4.75 ±0.25] .575 ±.031 [14.61 ±0.79] # 8- 32 UNC - 2A STYLE 12 # 8- 32 UNC - 2A Please Note: All bushing style filters include hex nut and lock washer unless otherwise noted. 7741 North Business Park Drive Tucson, Arizona 85743 Ph: 520-744-0400 Fax: 520-744-6155 Web site: www.tusonix.com E-mail: sales@tusonix.com #8-32 UNC-2A Pi, C & L Filters and Feed-Thru Capacitors .280 ±.031 [7.11 ±0.79] .187 ±.015 [4.75 ±0.38] .850 ±.031 [21.59 ±0.79] .266 ±.015 [6.76 ±0.38] .093 ±.015 [2.36 ±0.38] # 18 AWG. (.040) [1.02] .563 ±.031 [14.30 ±0.79] # 8- 32 UNC - 2A STYLE 14 .030 [0.76] .045 [1.14] SQUARE STYLE 15 Series Temperature WVdc Number Range 200 Z5, Y5, X5 2425 100 X7 .050 [1.27] .347 [8.81] REF. # 8- 32 UNC - 2A .497 [12.62] REF. .616 ±.015 [15.65 ±0.38] ♦ Turret Lead ∇ #18 AWG Lead 0.040 Dia. •• Typical Insertion Loss ❒ No hex nut or Lockwasher 10,000 10,000 Drawings not to scale. Notes Circuit 85°C 125°C Capacitance Tolerance Current (A) Capacitance (pF) MIL-PRF15733 Number Style Pi Configuration 4251-001 4201-048 4201-047 4201-502 4201-000 4201-001 4201-004 4201-006 4201-501 4201-503 4201-003 4201-050 4201-051 4201-053 4201-083 4251-004 4205-002 4205-018 4205-017 4205-001 4251-000 4251-002 C Configuration 2425-018-X5U0-101M 2425-544-X7R0-101M 2425-018-X5U0-102M 2425-544-X7R0-102P 2425-018-X5W0-502M 2425-601-X5W0-103Z 4404-001 4404-002 4404-003 L Configuration 4404-050 .040 + .000 -.002 [2.02 +.000 -0.05] DIA. 45˚ X.005 [0.13] RADIUS Notes: MAX. Cap. (Nominal) (pF) Please see Temperature Characteristics and EIA Codes on page 25. TUSONIX Part Number .378 [9.60] REF. .238 [6.05] .150 [3.81] .185 [4.70] .040 [1.02] inches [mm] .320 ±.015 [8.13 ±0.38] .150 ±.015 [3.81 ±0.38] # 16 AWG. (.051) [1.30] # 8- 32 UNC - 2A STYLE 13 .390 ±.031 [9.91 ±0.79] .187 ±.015 [4.75 ±0.38] 1MHz ---/61-0008 ----/28-0001 /28-0002 ------------- 8 -15 ❒ 15 ❒ 5 -1 -1 ♦ 1 ∇ 1 ♦∇ 1 ♦ 4 -2 -1 -1 ♦ 1 ♦∇ 9 -9 -3 -6 -6 -3 -7 -9 -- Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi -200 200 -200 200 200 200 --200 200 200 200 200 100 250 250 250 250 185 200 50 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 125 125 125 125 125 125 15,000 100 1000 1000 1500 1500 1500 1500 1500 1500 2000 5500 5500 5500 10,000 28,000 65 65 1500 1500 3000 12,000 GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV +80-20% GMV +100 -0% +100 -0% GMV GMV +100 -0% GMV 10 15 15 10 10 10 15 15 10 10 15 10 10 15 10 10 15 15 15 15 15 10 5 --------------10 -----5 ---------- 11 ••♦ 11 •• 11 ••♦ 11 •• 11 ••♦ 14 •• 1 ♦ 12 -10 -- C C C C C C C C C 200 200 200 200 200 200 100 140 -- 100 100 100 100 100 100 100 100 100 ±20% 100 ±20% 100 ±20% 1000 1000 +100 -0% ±20% 5000 10,000 +80-20% GMV 27,000 GMV 50,000 GMV 100,000 20 20 20 20 20 20 10 10 10 -- 13 L -- 100 22,000 10 -- Working Voltage (dc) GMV Minimum No-Load Insertion Loss (dB) at 25°C per MIL-Std-220 10MHz 100MHz 1GHz 10GHz 18 -4 -5 5 5 5 --5 14 14 14 18 38 --5 5 10 28 65 5 37 65 45 45 38 38 45 45 38 55 55 55 65 75 3 3 35 35 30 65 70 32 60 70 65 65 63 63 60 60 63 70 70 65 70 75 16 16 60 60 65 70 ---70 70 70 70 70 60 60 70 70 70 65 70 75 45 45 60 60 65 70 ------10 15 20 --3 3 15 20 30 34 38 3 3 20 20 30 35 45 45 47 20 20 35 35 45 50 55 60 65 28 28 40 40 50 55 ---- 7 27 43 60 -- Please Note: All bushing style filters include hex nut and lock washer unless otherwise noted. 18 The products listed in this catalog are only a few of the thousands of variations that TUSONIX produces. For custom component design, please contact the factory direct. #8-36 UNF-2A and #12-28 UNF-2A Pi & C Filters and Feed-Thru Capacitors .359 ±.031 .453 ±.031 [9.12 ±0.79] [11.51 ±0.79] .250 ±.015 [6.35 ±0.38] .187 ±.005 [4.75 ±0.13] .281 ±.015 [7.14 ±0.38] .187 ±.015 [4.75 ±0.38] .360 ±.020 [9.14 ±0.51] .240 ±.020 [6.10 ±0.51] .090 ±.010 [2.29 ±0.25] # 8 - 36 UNF - 2A COLOR CODE # 20 AWG. (.032) [0.81] # 12- 28 UNF - 2A STYLE 1 .328 ±.031 [8.33 ±0.79] .250 ±.015 [6.35 ±0.38] 1.131 ±.031 [28.73 ±0.79] .312 ±.015 [7.92 ±0.38] .625 ±.015 [15.88 ±0.38] .344 [8.74] STYLE 4 .250 ±.031 [6.35 ±0.79] .156 ±.015 [3.96 ±0.38] .312 ±.015 [7.92 ±0.38] .063 [1.60] Drawings not to scale. Series Temperature WVDC Number Range 500 Z5, Y5, X5 2499 250 X7 500 Z5, Y5, X5 357 250 X7 MAX. CAP. Nominal (pF) Notes: ♦ •• ∇ 10,000 10,000 10,000 10,000 Turret Lead Typical Insertion Loss No Hex Nut Included Please see Temperature Characteristics and EIA Codes on Page 25. MIL-PRF15733 Number Notes Circuit 85°C 125°C Capacitance (pF) Capacitance Tolerance Current (A) # 12-28 UNF - 2A Style C Configuration 4401-005 4401-006 4401-010 4401-011 4401-003 4401-004 4401-680 4401-008 4401-009 4401-000 4401-001 4401-007 4401-002 Pi Configuration 4202-053 4202-054 4204-050 4204-051 4202-020 4202-021 4204-000 4204-001 4204-500 4204-501 C Configuration 2499-003-X5U0-102P 2499-003-X5W0-502P 2499-003-X5W0-103Z 357-001-X5W0-103Z # 12- 28 UNF - 2A .125 ±.015 [3.18 ±0.38] STYLE 5 TUSONIX Part Number # 16 AWG. (.051) [1.29] .269 ±.015 [6.83 ±0.38] .156 REF. [3.96 REF.] 19 .040 ±.005 [1.02 ±0.13] # 12- 28 UNF - 2A STYLE 3 # 16 AWG. (.051) [1.29] .250 ±.015 [6.35 ±0.38] .312 ±.015 [7.92 ±0.38] # 20 AWG. (.032) [0.81] .030 [0.76] .015 ±.005 DIA. [0.38 ±0.13] 1.000 ±.031 [25.40 ±0.79] .484 ±.031 [12.29 ±0.79] .156 ±.015 [3.96 ±0.38] .156 REF. [3.96 REF.] STYLE 2 inches [mm] -------------- 2 2 2 2 2 2 2 2 2 2 2 2 2 ∇ ∇ ∇ ∇ ∇ ∇ ∇ ∇ ∇ ∇ ∇ ∇ ∇ C C C C C C C C C C C C C 70 70 70 50 150 150 300 300 300 300 300 300 300 50 50 50 50 100 100 200 200 200 200 200 200 200 10,000 15,000 27,000 50,000 2700 5000 5 10 25 100 500 1000 1200 GMV GMV GMV GMV GMV GMV MAX GMV GMV GMV GMV GMV GMV 10 10 10 10 10 10 10 10 10 10 10 10 10 4 7 10 15 ---------- 21 20 28 35 10 15 -----5 5 35 35 42 45 25 30 ---3 15 20 20 50 55 65 70 40 45 -5 10 20 35 35 35 60 60 65 -50 55 -20 25 28 40 45 45 --------/61-0001 /43-0001 3 3 1 1 3 3 1 1 1 1 -♦ -♦ -♦ -♦ -♦ Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi 200 200 200 200 350 350 350 350 --- 100 100 100 100 200 200 200 200 200dc 140ac 200dc 140ac 5000 5000 5000 5000 1500 1500 1500 1500 1500 1500 GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV 10 10 10 10 10 10 10 10 10ac 10ac ----------- 20 20 20 20 5 5 5 5 --- 65 65 65 65 45 45 45 45 45 -- 70 70 70 70 70 70 70 70 70 45 70 70 70 70 70 70 70 70 70 45 ----- 4 4 4 5 •• •• •• •• C C C C 500 500 500 500 250 250 250 250 1000 5000 10,000 10,000 +100-0% +100-0% +80-20% +80-20% 20 20 20 20 ----- 3 15 20 20 20 30 35 35 35 45 50 50 40 50 55 55 Working Voltage (dc) Minimum No-Load Insertion Loss (dB) at 25°C per MIL-Std-220 1MHz 10MHz 100MHz 1GHz 10GHz Please note: All bushing style filters include hex nut and lock washer unless otherwise specified. 7741 North Business Park Drive Tucson, Arizona 85743 Ph: 520-744-0400 Fax: 520-744-6155 Web site: www.tusonix.com E-mail: sales@tusonix.com #12-32 UNEF-2A Pi, & C Filters .359 ±.031 [9.12 ±0.79] .250 ±.015 [6.35 ±0.38] .343 ±.031 [8.71 ±0.79] .311 ±.015 [7.90 ±0.38] .157 ±.015 [3.99 ±0.38] .468 ±.031 [11.89 ±0.79] .312 ±.015 [7.92 ±0.38] .680 ±.031 [17.27 ±0.79] .140 ±.015 [3.56 ±0.38] # 20 AWG. (.032) [0.81] .125 ±.015 [3.17 ±0.38] .250 ±.015 [6.35 ±0.38] .187 ±.015 [4.75 ±0.38] STYLE 4 Turret Lead #18 AWG Lead 0.040 [1.02] Dia. “A” Dim. A in #2= .250 ± .015 [6.35 ± 0.38] “B” Dim. A in #2= .235 ± .015 [5.97 ± 0.38] •• Typical Insertion Loss TUSONIX Part Number # 20 AWG. (.032) [0.81] STYLE 5 ♦ ∇ inches [mm] .405 ±.010 [10.29 ±0.25] .125 ±.015 [3.18 ±0.38] 2452 # 12- 32 UNEF - 2A # 12- 32 UNEF - 2A Notes: .712 ±.050 [18.08 ±1.27] .156 ±.015 [3.96 ±0.38] .208 ±.015 [5.28 ±0.38] .062 [1.57] # 12- 32 UNEF - 2A .437 ±.031 [11.10 ±0.79] .468 ±.031 [11.89 ±0.79] .406 ±.031 [10.31 ±0.79] .405 ±.010 [10.29 ±0.25] .156 ±.015 [3.96 ±0.38] # 12- 32 UNEF - 2A STYLE 2 # 12- 32 UNEF - 2A STYLE 3 .921 ±.031 [23.40 ±0.79] # 20 AWG. (.032) [0.81] # 20 AWG. (.032) [0.81] .250 ±.015 [6.35 ±0.38] .187 ±.015 [4.75 ±0.38] .187 ±.015 [4.75 ±0.38] .281 ±.015 [7.14 ±0.38] .187 ±.015 [4.75 ±0.38] STYLE 1 "A"/ "B" .240 ±.015 [6.10 ±0.38] .453 ±.031 [11.51 ±0.79] Temperature Range Z5, Y5, X5 X7 WVdc MAX. CAP. (Nominal) (pF) 500 250 1800 1800 Capacitance Tolerance Current (A) 10MHz 300 300 350 12,000 50,000 5000 5000 5000 5000 5000 5000 5000 25,000 22,000 1500 1500 1500 1500 1500 1500 5000 1200 4000 2500 GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV 10 10 10 10 10 10 10 10ac 10ac 10 10 10 10 10 10ac 10 10ac 10ac 10 10 15 45 60 20 20 20 20 20 --30 45 5 5 5 -5 --5 15 5 70 75 65 65 65 65 65 65 65 65 75 45 45 45 45 45 45 65 43 55 50 70 75 70 70 70 70 70 70 70 70 75 70 70 70 70 70 70 70 55 60 70 70 75 70 70 70 70 70 70 70 70 75 70 70 70 70 70 70 70 55 60 70 250 250 250 100 470 1000 ±20% ±20% +100-0% 20 20 20 --3 3 12 20 20 27 35 28 27 40 Notes Circuit Working Voltage (dc) MIL-PRF15733 Number Style TUSONIX Part Number Capacitance (pF) Please see Temperature Characteristics and EIA Codes on page 25. 85°C 125°C -------/61-0011 /61-0010 -----/61-0002 -/61-0006 /61-0007 ---- 3 3 1 1 2 2 2 2 2 2 3 1 2 1 1 2 2 2 5 5 1 ---♦ -♦ ♦A ♦B ♦A ♦ ---♦ ♦ ♦A ♦B ♦A --∇ Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi 100 100 200 200 200 200 200 ----350 350 350 -350 --500 500 500 ---- 4 4 4 •• •• •• C C C 500 500 500 Minimum No-Load Insertion Loss (dB) at 25°C per MIL-Std-220 100MHz 1GHz 10GHz Pi Configuration 4207-003 4253-002 4202-050 4202-051 4203-050 4203-051 4203-053 4203-551 4203-553 4253-001 4253-000 4202-000 4203-000 4202-001 4202-501 4203-003 4203-501 4203-552 4207-000 4207-001 4202-004 C Configuration 2452-000-X7R0-101M 2452-000-X7R0-471M 2452-000-X5U0-102P Drawings not to scale. 70 70 100 100 100 100 100 100dc 70ac 100dc 70ac 100 140 200 200 200 200dc 140ac 200 200dc 140ac 100dc 70ac Please note: All bushing style filters include hex nut and lock washer unless otherwise specified. 20 The products listed in this catalog are only a few of the thousands of variations that TUSONIX produces. For custom component design, please contact the factory direct. 1/4-28 and 5/16-24 UNF-2A and 5/16-32 UNEF-2A Pi Filters and Feed-Thru Capacitors inches [mm] .562 ±.031 [14.27 ±0.79] .375 ±.010 [9.53 ±0.25] .750 ±.031 [19.05 ±0.79] 1.250 ±.031 [31.75 ±0.79] .312 ±.015 [7.92 ±0.38] .750 ±.031 [19.05 ±0.79] .437 ±.010 [11.10 ±0.25] .250 ±.010 [6.35 ±0.25] .313 ±.015 [7.95 ±0.38] # 15 AWG. (.057) [1.45] .050 ±.010 [1.27 ±0.25] (2) PLCS. # 16 AWG. (.051) [1.30] .125 ±.031 [3.18 ±0.79] .219 ±.015 [5.56 ±0.38] .060 ±.010 [1.52 ±0.25] 5/16 - 32 UNEF - 2A STYLE 1 .250 ±.031 [6.35 ±0.79] STYLE 2 1.750 ±.031 [44.45 ±0.79] .375 ±.015 [9.53 ±0.38] .562 ±.031 [14.27 ±0.79] .375 ±.010 [9.53 ±0.25] .300 ±.015 [7.62 ±0.38] .062 ±.015 [1.57 ±0.38] .562 ±.031 [14.27 ±0.79] .250 ±.003 [6.35 ±0.08] 327 2432 Temperature Range Z5, Y5, X5 X7 Z5, Y5, X5 X7 .437 ±.010 [11.10 ±0.25] .250 ±.010 [6.35 ±0.25] # 15 AWG. (.057) [1.45] .050 ±.010 [1.27 ±0.25] (2) PLCS. .438 ±.031 [11.13 ±0.79] .875 ±.031 [22.23 ±0.79] STYLE 3 TUSONIX Part Number STYLE 4 WVDC MAX. CAP. (Nominal) (pF) 500 250 2000 1000 10,000 10,000 7,000 7,000 Notes: Drawings not to scale. ∇ •• 2 2 2 2 •• •• •• •• C C C C 500 500 500 500 250 250 250 250 ------ 3 3 3 3 3 •• •• •• •• •• C C C C C 2000 2000 2000 2000 2000 1000 1000 1000 1000 1000 -/61-0004 /61-0003 -- 1 4 4 1 --∇ -- Pi Pi Pi Pi 1000 --1000 -500dc 350ac 500dc 350ac 500 5/16-24 UNF-2A Thread Typical Insertion Loss Minimum No-Load Insertion Loss (dB) at 25°C per MIL-Std-220 Current (A) ----- Capacitance Tolerance Circuit 85°C 125°C Capacitance (pF) Notes Working Voltage (dc) MIL-PRF15733 Number Style C Configuration 327-010-X5U0-102M 327-010-X5U0-152M 327-010-X5U0-502P 327-010-X7W0-103Z C Configuration 2432-002-X5R0-101M 2432-002-X5S0-471M 2432-002-X5U0-502M 2432-002-X5W0-752Z 2432-002-X7R0-102M Pi Configuration 4206-016 4206-501 4206-502 4206-006 5/16 - 32 UNEF - 2A .220 ±.010 [5.59 ±0.25] Please see Temperature Characteristics and EIA Codes on page 25. TUSONIX Part Number .750 ±.031 [19.05 ±0.79] 5/16 - 24 UNF - 2A # 16 AWG. (.051) [1.30] 21 1/4 - 28 UNF - 2A 10MHz ±20% 1000 1500 ±20% 5000 +100-0% 10,000 +80-20% 20 20 20 20 3 5 15 20 20 22 30 35 35 35 45 50 40 40 50 55 100 470 5000 7500 1000 ±20% ±20% ±20% +80-20% ±20% 20 20 20 20 20 --15 15 3 3 12 30 30 20 20 27 45 45 35 27 27 50 50 40 1000 2000 2000 3000 GMV GMV GMV GMV 25 25ac 25ac 25 3 --10 35 55 55 55 65 70 70 70 65 70 70 70 100MHz 1GHz 10GHz Please note: All bushing style filters include hex nut and lock washer unless otherwise specified. 7741 North Business Park Drive Tucson, Arizona 85743 Ph: 520-744-0400 Fax: 520-744-6155 Web site: www.tusonix.com E-mail: sales@tusonix.com Metric Bushing Filters .905 ±.079 [23.00 ±2.00] .433 ±.039 [11.0 ±1.00] .157±.008 [4.00 ±0.20] .276±.020 [7.01 ±0.51] .649 ±.039 [16.48 ±1.00] .453 ±.039 [7.01 ±0.51] .472 ±.039 [12.0 ±1.00] .118 ±.006 [3.00 ±0.15] .394 ±.008 [10.01 ±0.20] .098 MAX. [2.48 MAX.] .157 ±.020 [4.00 ±0.50] .100 MAX. [2.54 MAX.] .030 MAX. [0.76 MAX.] .038 MAX. [0.97 MAX.] STYLE 1 # 16 AWG. (.051) [1.29] STYLE 3 M5 X 0.8 - 6g .138 ±.020 [3.51 ±0.51] .921 ±.031 [23.39 ±0.79] .343 ±.031 [8.71 ±0.79] .250±.015 [6.35 ±0.38] .031 ±.002 [ 0.79 ±0.05] M3 X 0.5 - 6g .240 ±.015 [6.10 ±0.38] .187±.015 [4.75 ±0.38] .060 MAX. [1.52 MAX.] inches [mm] .060 MAX. [1.52 MAX.] # 20 AWG. (.032) [0.81] STYLE 2 .157 ±.015 [4.00 ±0.38] M5 X 0.8 - 6g MAX. CAP. Nominal (pF) Series Temperature WVdc Number Range 500 Z5, Y5, X5 2499 250 X7 5000 5000 Notes: •• Drawings not to scale. ---------- C C C C C C C C C 70 70 50 150 300 300 300 300 150 50 50 50 100 200 200 200 200 100 2 2 3 --•• Pi Pi C 350 350 500 100 200 250 Typical Insertion Loss Minimum No-Load Insertion Loss (dB) at 25°C per MIL-Std-220 Current (A) 1 1 1 1 1 1 1 1 1 Capacitance Tolerance Working Voltage (dc) 85°C 125°C Capacitance (pF) Circuit M3 Thread 4400-093 4400-098 4400-099 4400-094 4400-095 4400-683 4400-076 4400-096 4400-097 M5 Thread 4209-053 4209-003 2499-523-Y5R0-102P Notes TUSONIX Part Number Style Please see Temperature Characteristics and EIA Codes on page 25. 1MHz 10,000 +80-20% 27,000 GMV GMV 50,000 GMV 4700 1000 GMV 5 MAX 100 GMV 470 GMV GMV 2700 10 10 10 10 10 10 10 10 10 4 10 15 ------- 20 28 35 15 5 ---10 35 42 45 30 20 -3 15 25 50 55 70 45 35 -20 35 40 50 60 -55 45 -28 40 50 GMV GMV +100-0% 10 10 20 ---- 20 5 3 65 45 20 70 70 35 70 70 40 5500 1500 1000 10MHz 100MHz 1GHz 10GHz Please note: All bushing style filters include hex nut and lock washer unless otherwise specified. 22 The products listed in this catalog are only a few of the thousands of variations that TUSONIX produces. For custom component design, please contact the factory direct. Coaxial Broadband Filter 1/4-28 UNF-2A Hermetic Seal .385 MAX. [9.78 MAX.] inches [mm] .385 MAX. [ 9.78 MAX.] .385 MAX. [ 9.78 MAX.] .050 X .070 SLOT [1.27] [1.78] REF. BOTH ENDS. # 18 (.040) AWG. [1.02] .325 MAX. [ 8.26 MAX.] .175 REF. [ 4.45 REF.] A ±.010 [ 0.25] B MAX. 1.175 MAX. [ 29.85 MAX.] .335 MAX. [ 8.51 MAX.] .175 REF. [ 4.45 REF.] A ±.010 [ 0.25] 1/4 - 28 UNF - 2A THD. QUICK DISCONNECT TERMINAL - CRIMPED & SOLDERED. B MAX. .175 REF. [ 4.45 REF.] .312 REF. [ 7.92 REF.] 1/4 - 28 UNF - 2A THD. .200 ±.010 [5.08 ±0.25] .200 ±.010 [5.08 ±0.25] .624 ±.025 [15.85 ±0.64] 1/4 - 28 UNF - 2A THD. # 15 (.057) AWG. [1.45] 23 .350 [8.89] .367 [9.32] .492 [12.50] .350 [8.89] .475 [12.07] .367 [9.32] .492 [12.50] .350 [8.89] .475 [12.07] .367 [9.32] .492 [12.50] .350 [8.89] .475 [12.07] .367 [9.32] .492 [12.50] .350 [8.89] .475 [12.07] C C C C C C C C C L L L L L L L L 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 .367 [9.32] .492 [12.50] .350 [8.89] .475 [12.07] .367 [9.32] .492 [12.50] .350 [8.89] .475 [12.07] .367 [9.32] .350 [8.89] .367 [9.32] .492 [12.50] .350 [8.89] .475 [12.07] .367 [9.32] .492 [12.50] .350 [8.89] .475 [12.07] .367 [9.32] .350 [8.89] C C C C C C C C C C L L L L L L L L L L 100 100 100 100 100 100 100 100 280 280 100 100 100 100 100 100 100 100 280 280 70 70 70 70 50 70 50 50 Drawings not to scale. 200dc 125ac 200dc 125ac 70 70 70 70 50 50 50 50 200dc 125ac 200dc 125ac Current (A) X7W Temperature Characteristic .187 [4.75] 2 4601-009 .187 [4.75] 1 4600-005 .312 [7.93] 1 4600-006 .187 [4.75] 2 4601-005 .312 [7.93] 2 4601-006 .187 [4.75] 1 4600-000 .312 [7.93] 1 4600-002 .187 [4.75] 2 4601-000 .312 [7.93] 2 4601-002 .187 [4.75] 1 4600-055 .312 [7.93] 1 4600-056 .187 [4.75] 2 4601-055 .312 [7.93] 2 4601-056 .187 [4.75] 1 4600-050 .312 [7.93] 1 4600-052 .187 [4.75] 2 4601-050 .312 [7.93] 2 4601-052 X7R Temperature Characteristic .187 [4.75] 1 4600-007 .312 [7.93] 1 4600-008 .187 [4.75] 2 4601-007 .312 [7.93] 2 4601-008 .187 [4.75] 1 4600-003 .312 [7.93] 1 4600-004 .187 [4.75] 2 4601-003 .312 [7.93] 2 4601-004 .187 [4.75] 1 4600-009 .187 [4.75] 2 4601-010 .187 [4.75] 1 4600-057 .312 [7.93] 1 4600-058 .187 [4.75] 2 4601-057 .312 [7.93] 2 4601-058 .187 [4.75] 1 4600-053 .312 [7.93] 1 4600-054 .187 [4.75] 2 4601-053 .312 [7.93] 2 4601-054 .187 [4.75] 1 4600-059 .187 [4.75] 2 4601-059 Working Voltage (dc) 85°C 125°C Dim. B inch [mm] .200 ±.010 [5.08 ±0.25] STYLE 3 Capacitance (pF) Dim. A inch [mm] STYLE 2 Circuit TUSONIX Part Number Style STYLE 1 30KHz 100KHz 300KHz 1MHz 10MHz 1GHz 10pF Max 0.7 μF 0.7 μF 0.7 μF 0.7 μF 1.4 μF 1.4 μF 1.4 μF 1.4 μF 0.7 μF 0.7 μF 0.7 μF 0.7 μF 1.4 μF 1.4 μF 1.4 μF 1.4 μF 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 -9 9 9 9 15 15 15 15 9 9 9 9 15 15 15 15 -20 20 20 20 25 25 25 25 20 20 20 20 25 25 25 25 -29 29 29 29 34 34 34 34 29 29 29 29 34 34 34 34 -39 39 39 39 44 44 44 44 39 39 39 39 44 44 44 44 -52 52 52 52 60 60 60 60 52 52 52 52 60 60 60 60 -70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 9 9 9 9 15 15 15 15 --9 9 9 9 15 15 15 15 --- 20 20 20 20 25 25 25 25 7 7 20 20 20 20 25 25 25 25 7 7 29 29 29 29 34 34 34 34 15 15 29 29 29 29 34 34 34 34 15 15 39 39 39 39 44 44 44 44 25 25 39 39 39 39 44 44 44 44 25 25 52 52 52 52 60 60 60 60 40 40 52 52 52 52 60 60 60 60 40 40 70 70 70 70 70 70 70 70 60 60 70 70 70 70 70 70 70 70 60 60 0.7 0.7 0.7 0.7 1.4 1.4 1.4 1.4 .15 .15 0.7 0.7 0.7 0.7 1.4 1.4 1.4 1.4 .15 .15 μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF Minimum No-Load Insertion Loss (dB) at 25°C per MIL-Std-220 All bushing style filters include hex nut and lock washer unless otherwise noted. 7741 North Business Park Drive Tucson, Arizona 85743 Ph: 520-744-0400 Fax: 520-744-6155 Web site: www.tusonix.com E-mail: sales@tusonix.com Coaxial Broadband Filter 1/4-28 UNF-2A and Standard Hardware Dimensions Notes: -------- C C C L L L L Working Voltage (dc) 85°C 125°C 100 100 280 100 100 100 280 70 50 200dc 125ac 70 70 50 200dc 125ac 0.7 1.4 .15 0.7 1.2 1.4 .15 μF μF μF μF μF μF μF Minimum No-Load Insertion Loss (dB) at 25°C per MIL-Std-220 Current (A) X7R Temperature Characteristic --4600-014 3 --4600-015 3 --4600-016 3 --4600-070 3 -▲ 4600-067 3 --4600-071 3 --4600-072 3 Dim. B inch [mm] Capacitance (pF) Dim. A inch [mm] Notes Style TUSONIX Part Number Circuit ▲ 12 AWG .081[2.06] Lead and X7W Temp. Characteristic 30KHz 100KHz 300KHz 1MHz 10MHz 1GHz 20 20 20 20 30 20 20 9 15 -9 15 15 -- 20 25 7 20 25 25 7 29 34 15 29 34 34 15 39 44 25 39 44 44 25 52 60 40 40 52 60 60 70 70 60 70 70 70 60 STANDARD HARDWARE DIMENSIONS A B D (CLEAR) HEX NUT C D TYPE I NUT THREAD SIZE 4-40 UNC 6-32 UNC 6-40 UNF 8-32 UNC 8-36 UNF 12-28 UNF 12-32 UNEF 1/4-28 UNF 5/16-24 UNF 5/16-32 UNEF 3/8-32 UNEF M3 X 0.5 M5 X 0.8 6g MOUNTING TORQUE LIMITS 2 lb.in. [.226 N-m] 2 lb.in. [.226 N-m] 3 lb.in. [.339 N-m] 5 lb.in. [.565 N-m] 1lb.in. [.113 N-m] 8 lb.in. [.904 N-m] 8 lb.in. [.904 N-m] 8 lb.in. [.904 N-m] 9 lb.in. [1.02 N-m] 9 lb.in. [1.02 N-m] 9 lb.in. [1.02 N-m] 2 lb.in. [.226 N-m] 7 lb.in. [.790 N-m] E TYPE S LOCK WASHER TYPE HEX NUT A C E B C D Characteristics E .187 [4.75] .062 [1.57] I .220 [5.59] .120 [3.05] .015 [0.38] .187 [4.75] .062 [1.57] I .283 [7.19] .146 [3.71] .017 [0.43] .187 [4.75] .062 [1.57] I .283 [7.19] .146 [3.71] .017 [0.43] .250 [6.35] .075 [1.91] I .283 [7.19] .167 [4.24] .018 [0.46] -- -- I .283 [7.19] .167 [4.24] .015 [0.38] .250 [6.35] .250 [6.35] .075 [1.91] .100 [2.54] I .387 [9.83] .220 [5.59] .022 [0.56] .250 [6.35] .075 [1.91] .313 ± .015 [7.95 ± 0.38] .375 ± .010 [9.53 ± 0.25] .375 ± .010 [9.53 ± 0.25] .500 ± .010 [12.7 ± 0.25] .187 ± .010 [4.75 ± 0.25] I .387 [9.83] .220 [5.59] .022 [0.56] .125 ± .015 [3.18 ± 0.38] I .387 [9.83] .220 [5.59] .022 [0.56] .090 [2.29] I .420 [10.6] .262 [6.65] .025 [0.63] .090 [2.29] I .430[10.92] .318 [8.08] .022 [0.56] .090 [2.29] I .430 [10.92] .318 [8.08] .022 [0.56] .062 [1.57] I .500 [12.70] .384 [9.75] .022 [0.56] S .192 [4.88] .118 [2.99] .025 [0.63] S .277 [7.04] .172 [4.37] .034 [0.86] S .361 [9.17] .225 [5.72] .050 [1.27] .250 [6.35] .075 [1.91] 1. 2. 3. 4. Dimensions: Inches [metric] Dimensional Tolerance: ± .005 [0.13], thread tolerance class 2. Standard finish: Silver Nut material: Brass Washer material: Phosphor Bronze When mounting filter without hardware, into tapped hole, the mounting torque applied to the filter body must be no more than 1/2 the torque limits listed on the chart to the left. 24 The products listed in this catalog are only a few of the thousands of variations that TUSONIX produces. For custom component design, please contact the factory direct. Product Installation Recommendations and EIA codes PRODUCT INSTALLATION RECOMMENDATIONS The components in this catalog are manufactured with ceramic dielectrics. To minimize possible damage to the components during installation, the recommendations below should be followed. For information concerning other installation requirements and/or component modifications, consult TUSONIX Customer Engineering at (520) 744-0400. General Recommendations Handling: Excessive force or direct impact to the component may result in breakage. Lead bending or cutting, if necessary, should be done with a support for the lead to prevent mechanical stress to the component. Components with required lead modifications are available from TUSONIX. Lead Soldering: Use a temperature controlled soldering iron with SN60 or SN63 RMA Flux core wire. Maximum soldering temperature to be 500°F(260°C) with a dwell time of 3 seconds maximum. The use of a heat sink between the component body and the solder joint is highly recommended. Flux Removal: Optimum flux removal can be achieved by vapor degreasing the components immediately after the soldering operation. Total immersion of the components is not recommended. Solder Mount Recommendations Mounting: Use a convection or infrared oven and SN60 or SN63 solder paste, or solder preforms, with RMA Flux. The oven profile should slowly heat the entire assembly to a reflow temperature of 430°F (221°C), with a rate of change not to exceed 5°F,3°C/Sec. and a dwell time as short as possible. Internal Electrode Soldering: Use a temperature controlled soldering iron with SN62 silver bearing (2%) RMA Flux core solder wire. The components should be preheated to 300°F (150°C), then soldered with a maximum temperature of 500°F (260°C) and a dwell of 3 seconds maximum. Bushing Mount Recommendations For Mounting Torque, please see standard hardware dimensions table on page 24. EIA/Tusonix Tolerance Codes EIA Code Temperature Range Z5 Y5 X5 X7 EIA Code D E F P R S T U V W +10°C to +85°C -30°C to +85°C -55°C to +85°C -55°C to +125°C Maximum Cap. Change ± 3.3% ± 4.7% ± 7.5% ± 10% ± 15% ± 22% + 22% -33% + 22% -56% + 22% -82% + 22% -90% Nominal Capacitnce 10 pF or Less GMV◆ ± 0.1 pF ± 0.25 pF ± 0.5 pF ± 0.3 pF ± 1 pF ± 2 pF ± 3% ± 5% ± 10% ± 2% ◆GMV: TUSONIX Code: Guarantied Minimum Value 25 CAPACITANCE TOLERANCE (Cont.) CAPACITANCE TOLERANCE TEMPERATURE CHARACTERISTICS Code Nominal Capacitnce over 10 pF AA A B C D E F G H I J K L GMV◆ +50% -20% ± 0.10% ± 0.25% ± 0.50% +70% -30% ± 1% ± 2% ± 3% +60% -40% ± 5% ± 10% +100% -40% Nominal Capacitnce 10 pF or Less ± 20% ± 0.4 pF ± 0.2 pF MAX. Code Nominal Capacitnce over 10 pF M N P Q R S T U V W X Y Z ± 20% ± 30% +100% -0% ± 15% ± 2.5% +50% -15% +30% -20% +80% -0% ± 7% +50% -30% +40% -10% +50% -0% +80% -20% Please note: Maximum Capacitance for each part number is determined by the required operating temperature range and maximum capacitance change. 7741 North Business Park Drive Tucson, Arizona 85743 Ph: 520-744-0400 Fax: 520-744-6155 Web site: www.tusonix.com E-mail: sales@tusonix.com General Test Specifications The Components shown in this catalog have been designed and subjected to the following test plan, as is applicable for the individual components. The information shown can be used as a basis for component specifications. For additional information, please consult Customer Engineering at (520) 744-0400. Filters governed by MIL-PRF-15733 shall be inspected and tested to the requirements of the specification and the applicable specification (slash) sheet. LOT ACCEPTANCE INSPECTION: INSPECTION OR TEST TEST METHOD PER MIL-STD-202 EXCEPT AS NOTED POST TEST REQUIREMENTS Visual and Mechanical Materials, Design, Construction and Workmanship In accordance with applicable requirements Physical Dimensions & Marking Seal (4601 Style Only) Method 112, condition A Capacitance Method 305, 1KHz, 1±0.2 VRMS max. +25°C Within specified tolerance Dissipation Factor (1/Q) Method 306, 1KHz, 1±0.2 VRMS max. +25°C 4.0% max Dielectric Withstanding Voltage Method 301, 2 seconds, 50 mA max. surge current, 2 times WVDC. No evidence of damage or break down. Insulation Resistance Method 302, 50 mA max. charging current, 100VDC, 2 minutes or as specified by individual variation Insertion Loss MIL-STD-220, 50 Ohms, +25°C, no load Greater than 10,000 Megohms or 100 Ohm-Farads, whichever is less. Per application requirements. DC Resistance (4601 Style Only) MIL-PRF-15733 Solderability (5pcs) Method 208 No leaks 0.01 Ohms max. Per applicable requirements. PERIODIC QUALITY CONFORMANCE INSPECTION: A periodic quality conformance inspection program consisting of environmental and reliability testing is in place to ensure that product integrity is consistently maintained. TUSONIX on-line www.tusonix.com The TUSONIX Web site provides visitors with a wide range of product and ordering information. At www.tusonix.com, customers can view product information and download catalogs in Adobe Acrobat® .pdf format. Customers can also view or link to Sales Offices, International Agents and Distributors. An on-line request form allows customers to immediately specify product requirements and request product information. 26