SWI12-5-N-P12

Additional Resources: Product Page | 3D Model date 04/28/2022 page 1 of 5 SERIES: SWI12-N │ DESCRIPTION: AC-DC POWER SUPPLY FEATURES • • • • • • • • DoE Level VI efficiency up to 12 W power universal input (90~264 Vac) single regulated output from 5~24 Vdc over voltage, over current, and short circuit protections UL/cUL, PSE safety approvals custom designs available certified to 60950-1 and 62368-1 standards MODEL output voltage output current output power ripple and noise1 (Vdc) max (A) max (W) max (mVp-p) 5 2.5 12.5 100 VI 5.9 2.0 11.8 100 VI 9 1.2 10.8 100 VI SWI12-12-N 12 1.0 12 120 VI SWI12-24-N 24 0.5 12 240 VI SWI12-5-N SWI12-5.9-N SWI12-9-N Notes: efficiency level 1. At full load, nominal input, 20 MHz bandwidth oscilloscope, each output terminated with 0.1 μF multilayer ceramic and 47 μF low ESR electrolytic capacitors. PART NUMBER KEY SWI12 - XX - N - XXX - CXX Reserved for Custom Configurations Base Number Output Voltage AC Input Type: North America cui.com DC Plug Type: XXX = See output plug options on page 4 for more details Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI12-N │ DESCRIPTION: AC-DC POWER SUPPLY date 04/28/2022 │ page 2 of 5 INPUT parameter conditions/description min voltage 90 frequency 47 typ current inrush current at 240 Vac, full load, 25°C, cold start leakage current no load power consumption at 115/230 Vac max units 264 Vac 63 Hz 0.31 A 60 A 0.25 mA 0.1 W max units OUTPUT parameter conditions/description min regulation typ ±5 % PROTECTIONS parameter conditions/description max units over voltage protection output shut down min typ 180 % over current protection output shut down, auto recovery 5 Vdc model 5.9 Vdc model 9 Vdc model 12 Vdc model 24 Vdc model 5.0 4.5 3.0 3.0 1.5 A A A A A short circuit protection output shut down, auto recovery max units SAFETY & COMPLIANCE parameter conditions/description isolation voltage input to output at 10 mA for 1 minute min isolation resistance input to output at 500 Vdc safety approvals UL/cUL (60950-1, 62368-1), LPS, PSE EMI/EMC FCC Part 15B Class B MTBF as per Telcordia SR-332, at 25°C RoHS yes typ 3,000 Vac 10 MΩ 300,000 hours ENVIRONMENTAL parameter conditions/description min operating temperature storage temperature typ max units 0 40 °C -20 80 °C operating humidity non-condensing 20 80 % storage humidity non-condensing 10 90 % cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI12-N │ DESCRIPTION: AC-DC POWER SUPPLY date 04/28/2022 │ page 3 of 5 MECHANICAL parameter conditions/description dimensions 72 x 34 x 59 inlet plug North America, 2-pin weight 5 Vdc model 5.9, 9 Vdc models 12 Vdc model 24 Vdc model min typ max units mm 132 120 112 104 MECHANICAL DRAWING units: mm tolerance: ±1.0 mm DC CORD units: mm Table 1 MODEL NO. CABLE CORD LENGTH SWI12-5-N UL2468, 18 AWG 1,500 mm ±30 SWI12-5.9-N UL2468, 20 AWG 1,500 mm ±30 SWI12-9-N UL2468, 20 AWG 1,500 mm ±30 SWI12-12-N UL2468, 22 AWG 1,500 mm ±30 SWI12-24-N UL2468, 22 AWG 1,500 mm ±30 cui.com g g g g Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI12-N │ DESCRIPTION: AC-DC POWER SUPPLY date 04/28/2022 │ page 4 of 5 DC PLUG TYPE PART NUMBER KEY XXX Plug Polarity: P = Center Positive Plug Code: X = Choose a code from the options below Plug Angle: “blank” = Straight R = Right Angle N = Center Negative Plug Polarity Code Dimensions (mm) Plug Angle Center Pos. Center Neg. Option Type A B C Straight Right ● ● 5 Standard 5.5 2.1 9.5 ● ● ● ● 6 Standard 5.5 2.5 9.5 ● ● ● ● 7 Standard 3.5 1.35 9.5 ● ● ● ● 8 Standard 3.8 1.35 9.5 ● ● ● ● 9 Standard 3.8 1.05 9.5 ● ● ● ● 10 Locking2 5.5 2.1 9.5 ● N/A ● ● 11 Locking2 5.5 2.5 9.5 ● N/A ● ● 12 EIAJ-1 2.35 0.7 9.5 ● ● ● ● 13 EIAJ-2 4.0 1.7 9.5 ● ● ● ● 14 EIAJ-3 4.75 1.7 9.5 ● ● N/A N/A ST N/A N/A Stripped & Tinned Note: 1. Contact CUI for additional plug options 2. Maximum insertion depth is 10mm EIAJ Straight C C Straight Locking Right Angle (R) Stripped & Tinned 25±5 2.5±0.3 5±5 A B C A A Right Angle (R) C B B A A B C B Standard cui.com 10±2 Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI12-N │ DESCRIPTION: AC-DC POWER SUPPLY date 04/28/2022 │ page 5 of 5 REVISION HISTORY rev. description date 1.0 initial release 04/30/2015 1.01 updated datasheet 06/12/2015 1.02 updated weight detail 06/08/2017 1.03 added 62368-1 standard 08/31/2018 1.04 company logo updated 09/18/2020 1.05 safety marks updated 04/26/2021 1.06 mechanical drawing updated 08/09/2021 1.07 plug polarity symbols updated 09/16/2021 1.08 dc plugs updated 04/28/2022 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.