0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
CY3280-SLM

CY3280-SLM

  • 厂商:

    EUPEC(英飞凌)

  • 封装:

    -

  • 描述:

    MODULE LINEAR SLIDER CAPSENSE

  • 数据手册
  • 价格&库存
CY3280-SLM 数据手册
CY3280-SLM UNIVERSAL CAPSENSE® LINEAR SLIDER MODULE KIT QUICK START GUIDE 1 1. Insert the kit CD in the CD drive. 2. Install the kit contents, PSoC Designer, and PSoC Programmer. 3. The hardware prerequisites for this kit are the CY3280-20x34* Universal CapSense Controller (UCC) board and MiniProg1. 2 1. Connect the CY3280-SLM board to the CY3280-20x34 UCC board’s P2 connector. 2. In the CY3280-20x34 board, place the jumper on header J1 to short pins 2 and 3. 3. In the CY3280-SLM board, place the jumper on header J2 to short pins 2 and 3. * Note The ordering part number for CY3280-20x34 UCC is CY3280 - BK1. 3 1. Connect MiniProg1 to the CY3280-20x34 UCC Board’s ISSP connector (J3). Connect it to your PC using a USB cable. 2. Open PSoC Programmer and click File>File Load. Browse and load the CY3280_20x34_PD_Project1.hex file*. 3. Click Connect; connect MiniProg1 to PC. 4. Click Program button to program the device. 5. Click Toggle button to power the board. *Note These files are located at: \Cypress\CY3280-SLM\\Firmware 4 1. Touch and move the linear slider on the CY3280-SLM module board. The corresponding LEDs on the CY3280-SLM board light up. 2. Touch a button. The corresponding LED on the CY3280-SLM module board lights up. 3. You can touch multiple buttons at the same time. The linear slider and buttons can be used at the same time. CY3280-SLM UNIVERSAL CAPSENSE® LINEAR SLIDER MODULE KIT QUICK START GUIDE CY3280-SLM Kit Details LEDs Optional thermistor footprint (on reverse side) Optional thermistor Voltage test footprint points (on reverse side) CapSense buttons 44-pin CapSense connector (J1) CapSense slider Shield selection Jumper (J2) Notes • For more details on code examples, refer to the PDF file along with the project in the Firmware folder (for example, 21x34_CSD PD project 1.pdf) in the following directory: \Cypress\CY3280-SLM\\Firmware\21x34_CSD\PD project 1. • CY3280-SLM can be used with any of the following UCCs: 1. CY3280- 20x66 2. CY3280- 24x94 3. CY3280- 21x34 (ordering part number is CY3280-BK1) For the latest information about this kit visit www.cypress.com/go/CY3280-SLM © 2009-2018 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered trademarks referenced herein are the properties of their respective owners. Doc #: 001-51790 Rev. *F
CY3280-SLM 价格&库存

很抱歉,暂时无法提供与“CY3280-SLM”相匹配的价格&库存,您可以联系我们找货

免费人工找货