MTB17A03Q8

CYStech Electronics Corp. Dual N-CHANNEL ENHANCEMENT MODE POWER MOSFET Spec. No. : C729Q8 Issued Date : 2009.07.01 Revised Date : Page No. : 1/8 MTB17A03Q8 Description The MTB17A03Q8 provides the designer with the best combination of fast switching, ruggedized device design, ultra low on-resistance and cost effectiveness. The SOP-8 package is universally preferred for all commercial-industrial surface mount applications and suited for low voltage applications such as DC/DC converters. Features • RDS(ON)=15mΩ(max.)@VGS=10V, ID=10A • Simple drive requirement • Low on-resistance • Fast switching speed • Dual N-ch MOSFET package • Pb-free & Halogen-free package Equivalent Circuit MTB17A03Q8 Outline SOP-8 Pin 1 G：Gate S：Source D：Drain MTB17A03Q8 CYStek Product Specification CYStech Electronics Corp. Absolute Maximum Ratings (Ta=25°C) Parameter Symbol Spec. No. : C729Q8 Issued Date : 2009.07.01 Revised Date : Page No. : 2/8 Limits Unit V Drain-Source Voltage Gate-Source Voltage Continuous Drain Current, TC=25 °C Continuous Drain Current, TC=100 °C Pulsed Drain Current (Note 1) Avalanche Current Avalanche Energy @ L=0.1mH, ID=10A, RG=25Ω Repetitive Avalanche Energy @ L=0.05mH (Note 2) TA=25°C (Note 3) Power Dissipation TA=100°C Operating Junction and Storage Temperature Range VDS VGS ID ID IDM IAS EAS EAR PD Tj ; Tstg 30 ±20 10 7 40 12 5 2.5 2.4 1.2 -55~+175 A mJ W °C 100% UIS testing in condition of VD=15V, L=0.1mH, VG=10V, IL=7.5A, Rated VDS=30V N-CH Thermal Data Parameter Thermal Resistance, Junction-to-case, max Thermal Resistance, Junction-to-ambient, max Symbol Rth,j-c Rth,j-a Value 25 62.5 *3 Unit °C/W °C/W Note : 1. Pulse width limited by maximum junction temperature 2. Duty cycle≤1% 3. Surface mounted on 1 in² copper pad of FR-4 board, 125°C/W when mounted on minimum copper pad Characteristics (Tj=25°C, unless otherwise specified) Symbol Static BVDSS VGS(th) GFS *1 IGSS IDSS ID(ON) *1 *RDS(ON) *1 Dynamic Qg (VGS=10V) *1, 2 Qg (VGS=4.5V) *1, 2 Qgs *1, 2 Qgd *1, 2 td(ON) *1, 2 tr *1, 2 td(OFF) *1, 2 tf *1, 2 MTB17A03Q8 Min. 30 1 10 - Typ. 1.5 18 13 20 11 6 1.2 3.3 11 16 36 20 Max. 3 ±100 1 25 15 25 - Unit V V S nA μA A mΩ Test Conditions VGS=0, ID=250μA VDS = VGS, ID=250μA VDS =5V, ID=10A VGS=±20 VDS =24V, VGS =0 VDS =20V, VGS =0, Tj=125°C VDS =10V, VGS =10V VGS =10V, ID=10A VGS =4.5V, ID=6A nC ID=10A, VDS=15V, VGS=10V ns VDS=15V, ID=1A,VGS=10V, RG=6Ω, RD=15Ω CYStek Product Specification CYStech Electronics Corp. Ciss Coss Crss Rg Source-Drain Diode IS *1 ISM *3 VSD *1 trr Qrr 1115 116 82 2 50 2 2.3 9.2 1.2 pF Ω A V ns nC IF= IS, VGS=0V Spec. No. : C729Q8 Issued Date : 2009.07.01 Revised Date : Page No. : 3/8 VGS=0V, VDS=15V, f=1MHz VGS=15mV, VDS=0V, f=1MHz IF= IS, dI/dt=100A/μs Note : *1.Pulse Test : Pulse Width ≤300μs, Duty Cycle≤2% *2.Independent of operating temperature *3.Pulse width limited by maximum junction temperature. Ordering Information Device MTB17A03Q8 Package SOP-8 (Pb-free & Halogen-free package) Shipping 2500 pcs / Tape & Reel Marking B17A03 MTB17A03Q8 CYStek Product Specification CYStech Electronics Corp. Characteristic Curves Spec. No. : C729Q8 Issued Date : 2009.07.01 Revised Date : Page No. : 4/8 MTB17A03Q8 CYStek Product Specification CYStech Electronics Corp. Characteristic Curves(Cont.) Spec. No. : C729Q8 Issued Date : 2009.07.01 Revised Date : Page No. : 5/8 MTB17A03Q8 CYStek Product Specification CYStech Electronics Corp. Reel Dimension Spec. No. : C729Q8 Issued Date : 2009.07.01 Revised Date : Page No. : 6/8 Carrier Tape Dimension MTB17A03Q8 CYStek Product Specification CYStech Electronics Corp. Recommended wave soldering condition Product Pb-free devices Peak Temperature 260 +0/-5 °C Spec. No. : C729Q8 Issued Date : 2009.07.01 Revised Date : Page No. : 7/8 Soldering Time 5 +1/-1 seconds Recommended temperature profile for IR reflow Profile feature Average ramp-up rate (Tsmax to Tp) Preheat −Temperature Min(TS min) −Temperature Max(TS max) −Time(ts min to ts max) Time maintained above: −Temperature (TL) − Time (tL) Peak Temperature(TP) Time within 5°C of actual peak temperature(tp) Ramp down rate Time 25 °C to peak temperature Sn-Pb eutectic Assembly 3°C/second max. 100°C 150°C 60-120 seconds 183°C 60-150 seconds 240 +0/-5 °C 10-30 seconds 6°C/second max. 6 minutes max. Pb-free Assembly 3°C/second max. 150°C 200°C 60-180 seconds 217°C 60-150 seconds 260 +0/-5 °C 20-40 seconds 6°C/second max. 8 minutes max. Note : All temperatures refer to topside of the package, measured on the package body surface. MTB17A03Q8 CYStek Product Specification CYStech Electronics Corp. SOP-8 Dimension Top View A Right side View G Spec. No. : C729Q8 Issued Date : 2009.07.01 Revised Date : Page No. : 8/8 Marking: I B C H Device Name J D Front View Part A Date Code E Part A K L N O 8-Lead SOP-8 Plastic Package CYStek Package Code: Q8 M F *: Typical DIM A B C D E F G H Inches Min. Max. 0.1850 0.2007 0.1457 0.1614 0.2283 0.2441 0.0500* 0.0130 0.0201 0.1472 0.1527 0.0472 0.0638 0.1889 0.2007 Millimeters Min. Max. 4.70 5.10 3.70 4.10 5.80 6.20 1.27* 0.33 0.51 3.74 3.88 1.20 1.62 4.80 5.10 DIM I J K L M N O Inches Min. Max. 0.0031 0.0110 0.0157 0.0323 0.0074 0.0102 0.0145 0.0204 0.0118 0.0197 0.0031 0.0051 0.0000 0.0059 Millimeters Min. Max. 0.08 0.28 0.40 0.83 0.19 0.26 0.37 0.52 0.30 0.50 0.08 0.13 0.00 0.15 Notes: 1.Controlling dimension: millimeters. 2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.If there is any question with packing specification or packing method, please contact your local CYStek sales office. Material: • Lead: pure tin plated • Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0 Important Notice: • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek. • CYStek reserves the right to make changes to its products without notice. • CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. • CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. MTB17A03Q8 CYStek Product Specification