6A60

6A05 THRU 6A100 Features · The plastic package carries Underwrites Laboratory Flammability Classification 94V-0 · High forward current capability · High surge current capability · Construction utilizes void-free molded plastic technique · High temperature soldering guaranteed : 250℃/10 seconds, 0.375"(9.5mm) lead length, 5 lbs, (2.3kg) tension CURRENT 6.0 Amperes VOLTAGE 50 to 1000 Volts P-6 0.360(9.1) 0.340(8.6) DIA. 1.0(25.4) MIN. 0.360(9.1) 0.340(8.6) Mechanical Data · Case : P-6 molded plastic body · Terminals : Lead solderable per MIL-STD-750, method 2026 · Polarity : Color band denotes cathode end · Mounting Position : Any · Weight : 0.07 ounce, 2.1 grams 0.052(1.3) 0.048(1.2) DIA. 1.0(25.4) MIN. Dimensions in inches and (millimeters) Maximum Ratings And Electrical Characteristics (Ratings at 25℃ ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) Symbols Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375"(9.5mm) lead length TA=60℃ Peak forward surge current 8.3ms half sine wave superimposed on rated load (JEDEC method) Maximum instantaneous forward voltage at 6.0A Maximum reverse current at rated voltage TA=25℃ TA=100℃ VRRM VRMS VDC I(AV) IFSM VF IR RθJA RθJL CJ TJ TSTG 6A05 50 35 50 6A10 100 70 100 6A20 200 140 200 6A40 400 280 400 6.0 400.0 1.1 10.0 100.0 20.0 4.0 150 -50 to +175 6A60 600 420 600 6A80 800 560 800 6A100 1000 700 1000 Units Volts Volts Volts Amps Amps Volts μA ℃/W pF ℃ Typical thermal resistance (Note 2) Typical junction capacitance (Note 1) Operating and storage temperature range Notes: (1) Measured at 1MHz and applied reverse voltage of 4.0V DC. (2) Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm) lead length, P.C.B. mounted with 1.1×1.1"(30×30mm) copper pads. RATINGS AND CHARACTERISTIC CURVES 6A05 THRU 6A100 FIG.1-FORWARD CURRENT DERATING CURVE 6 AVERAGE FORWARD CURRENT AMPERES 5 4 3 2 1 0 0 20 40 60 80 100 120 140 160 180 200 Standard PC Board mounting Ground pane 1" X 1" copper surface area PC BOARD Recommended PC Board Mounting SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD FIG.2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 INSTANTANEOUS FORWARD CURRENT(AMPERES) PC Board 100 10 LEAD TEMPERATURE ( ℃) TJ=25℃ 1 PULSE WIDTH=300μS 1% DUTY CYCLE FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 600 500 PEAK FORWARD SURGE CURRENT (AMPERES) 400 300 200 100 0 1 10 NUMBER OF CYCLES AT 60Hz 100 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) FIG.4-TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT (μA) 10 TJ=100℃ FIG.5-TYPICAL THERMAL RESISTANCE VS LEAD LENGTH 30 THERMAL RESISTANCE (℃/W) 25 20 15 10 5 1.0 0.1 TJ=25℃ 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 EQUAL LEAD LENGTH TO HEAT SINK, (IN.)