CSF49110

FEATURES 1300 - 2100 MHz 4 Bands 1.2 Max Insertion Loss 0.5 dB Flatness GPO Connectors MODEL NO. CSF49110 Switchable Band Pass Filter MFA .203 P1 MS16555-631 .573 OR EQUIVALENT 2 PL .296 THESE SURFACES TO BE FREE OF PAINT AND PRIMER 7.12 REF. .06 .480 2X R.125 2X R.100 7183517 RETAINER 2 PL A1 A2 A3 LOGIC RET. FILTER #1 FILTER #2 FILTER #3 FILTER #4 THRU. PATH P2 2.000 .715 P3 GPO CONNECTOR MALE W/FEED THROUGH 6.393 5.250 4.250 .58 .480 THERMAL INTERFACE SURFACE (THESE SURFACES TO BE FREE OF PAINT AND PRIMER) 2 PL 2X 1.729 6.778 CROSS-HATCHED AREAS (BOTH NEAR AND FARSIDE) TO BE FREE OF PAINT AND PRIMER. RF IN (P1) 6.75 REF. +5Vdc IN -5Vdc RET. +15Vdc IN -15Vdc RET. EMI/RFI FILTER EMI/RFI FILTER RF OUT (P2) VOLTAGE SUPPLIES 1.940 7183538 EJECTOR 2 PL GUARANTEED PERFORMANCE P3 CONNECTOR CHART PIN # DES. 1 +5Vdc IN 2 -15Vdc RET 3 NC 4 NC 5 NC 6 LOGIC A2 7 LOGIC RET 8 LOGIC A1 9 +5Vdc RET 10 -15Vdc IN 11 NC NC 12 13 NC 14 NC 15 LOGIC A3 Parameter Operating Frequency DC Current Min Typ Max Units 1300 123 24 2100 200 70 ±10 +15 +1.25 +1.25 2.0/1 +10 +20 +110 MHz mA mA µA dB dB dB OHMS dBm dBm °C TA Conditions At +5 VDC At -15 VDC 3 Line TTL Control Control Logic Control Current Noise Figure Insertion Loss -1.25 Insertion Loss vrs. Temp. -1.25 VSWR Impedance RF Power Operate No Damage ±0.1 ±0.5 50 Operating Temperature -54 +25 DA I C O In d u s t r i e s Rev. 2 / Iss. 2