19-5253; Rev 0; 4/10
16-Channel (Two Banks of 8-Channel),
High-Voltage Analog Switches
Features
The MAX14805/MAX14806 provide high-voltage switching on 16 channels for ultrasonic imaging. Both devices
are ideal for the following applications: banks selection in
biplane or triplane ultrasound probes and relays replacement. The devices utilize 200V process technology to
provide sixteen high-voltage, low-charge injection SPST
switches, controlled by a digital interface.
S HVCMOS Technology for High Performance
The MAX14805/MAX14806’s output switches are configured as two sets of eight SPST analog switches. The
switches are controlled by two input logic controls, DIN1
and DIN2 (respectively for switch 0 to 7 and switch 8
to 15). The MAX14806 features integrated 40kI bleed
resistors on each switch terminal, which help to reduce
voltage buildup in capacitive loads such as piezoelectric
elements.
S Ultra-Low (0.1µA) (typ) Quiescent Current
S Two Sets of 8-Channel SPST High-Voltage Analog
Switches
S DC to 20MHz Low-Voltage Analog Signal
Frequency Range
S +2.7V to +5.5V Logic Supply Voltage
S Low-Charge Injection, Low-Capacitance 20I
Switches
S -77dB (typ) Off-Isolation at 5MHz (50I)
S Flexible, High-Voltage Supplies (VPP - VNN =
230V)
Applications
The MAX14805/MAX14806 operate with a wide range of
high-voltage supplies, including VPP/VNN = +100V/-100V,
+200V/0V, and +40V/-160V. The digital interface operates from a separate VDD supply from +2.7V to +5.5V.
Digital inputs DIN1, DIN2, and LE operate on the VDD
supply voltage.
Medical Ultrasound Imaging
Nondestructive Test (NDT)
The MAX14805CCM+ is a drop-in replacement for the
Supertex HV2631. The MAX14806CCM+ is a drop-in
replacement for the Supertex HV2731. Both devices are
available in the 48-pin, TQFP package and are specified
for the extended -40NC to +85NC temperature range.
Ordering Information/Selector Guide
PART
SWITCH
CHANNELS
BLEED
RESISTOR
SECOND SOURCE
PIN-PACKAGE
MAX14805CCM+
MAX14806CCM+
2x8
No
HV2631
48 TQFP
2x8
Yes
HV2731
48 TQFP
Note: All devices are specified over the extended -40°C to +85°C operating temperature range.
+Denotes a lead(Pb)-free/RoHS-compliant package.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
MAX14805/MAX14806
General Description
MAX14805/MAX14806
16-Channel (Two Banks of 8-Channel),
High-Voltage Analog Switches
ABSOLUTE MAXIMUM RATINGS
(All voltages referenced to GND.)
VDD Logic Supply Voltage.......................................-0.3V to +7V
VPP - VNN Supply Voltage ..................................................230V
VPP Positive Supply Voltage ...............................-0.3V to +220V
VNN Negative Supply Voltage ............................+0.3V to -220V
Logic Inputs Voltage (LE, DIN1, DIN2) . .................-0.3V to +7V
Analog Signal Range (SW_)........(-0.3V + VNN) to (VNN + 200V)
Peak Analog Signal Current per Channel . .............................3A
Continuous Power Dissipation (TA = +70NC)
48-Pin TQFP (derate 22.7mW/NC above +70NC) .......1818mW
Junction-to-Ambient Thermal Resistance
BJA (Note 1)..................................................................44NC/W
Junction-to-Case Thermal Resistance
BJC (Note 1).................................................................10NC/W
Operating Temperature Range........................... -40NC to +85NC
Storage Temperature Range............................. -65NC to +150NC
Junction Temperature.................................................... +150NC
Lead Temperature (soldering, 10s).................................+300NC
Soldering Temperature (reflow).......................................+260NC
Note 1: P
ackage thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a fourlayer board. For detailed information on package thermal considerations, refer to www.maxim-ic.com/thermal-tutorial.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = +2.7V to +5.5V, VPP = +40V to (VNN + 200V), VNN = -40V to -160V, TA = TMIN to TMAX, unless otherwise noted. Typical
values are at TA = +25NC.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
2.7
5.5
V
V
POWER SUPPLIES
VDD Supply Voltage
VDD
VPP Supply Voltage
VPP
40
100
VNN
+ 220
VNN Supply Voltage
VNN
-160
-100
-15
V
VDD Supply Quiescent Current
IDDQ
5
FA
2
mA
10
FA
VDD Supply Dynamic Current
IDDD
VPP Supply Quiescent Current
IPPQ
VPP Supply Dynamic Current
(All Channel Switching
Simultaneously)
VNN Supply Quiescent Current
VNN Supply Dynamic Current
(All Channel Switching
Simultaneously)
IPPD
VDD = +5V, LE = GND, fDIN1 = fDIN2 =
5MHz
VPP = +40V, VNN = -160V, fSW_ = 50kHz,
fDIN1 = fDIN2 = 50kHz, LE = GND
5
VPP = +100V, VNN = -100V, fSW_ = 50kHz,
fDIN1 = fDIN2 = 50kHz, LE = GND
6
VPP = +160V, VNN = -40V, fSW_ = 50kHz,
fDIN1 = fDIN2 = 50kHz, LE = GND
7
INNQ
INND
10
VPP = +40V, VNN = -160V, fSW_ = 50kHz,
fDIN1 = fDIN2 = 50kHz, LE = GND
5.5
VPP = +100V, VNN = -100V, fSW_ = 50kHz,
fDIN1 = fDIN2 = 50kHz, LE = GND
5
VPP = +160V, VNN = -40V, fSW_ = 50kHz,
fDIN1 = fDIN2 = 50kHz, LE = GND
4.5
2 _______________________________________________________________________________________
mA
FA
mA
16-Channel (Two Banks of 8-Channel),
High-Voltage Analog Switches
(VDD = +2.7V to +5.5V, VPP = +40V to (VNN + 200V), VNN = -40V to -160V, TA = TMIN to TMAX, unless otherwise noted. Typical
values are at TA = +25NC.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
VPP 10
V
SWITCH CHARACTERISTICS
Analog Signal Range
Small-Signal
On-Resistance
VSW_
RONS
Small-Signal
On-Resistance Matching
DRONS
(Note 3)
VNN
VPP = +40V,
VNN = -160V,
VSW_ = 0V
ISW_ = 5mA
28
52
ISW_ = 200mA
22
37
VPP = +100V,
VNN = -100V,
VSW_ = 0V
ISW_ = 5mA
22
34
ISW_ = 200mA
18
27
VPP = +160V,
VNN = -40V,
VSW_ = 0V
ISW_ = 5mA
20
30
ISW_ = 200mA
16
23
VPP = +100V, VNN = -100V, ISW_ = 5mA
5
%
15
I
Large-Signal Switch
On-Resistance
RONL
VSW_ = VPP - 10V, ISW_ = 1A
Shunt Resistance
RINT
MAX14806 only
Switch-Off Leakage
ISW_(OFF)
I
27
VSW_ = VPP - 10V or unconnected
(MAX14805 only) (Figure 1)
40
53
kI
0
2.5
FA
+30
mV
Switch-Off DC Offset
RL = 100kI (Figure 1)
Switch Output Peak Current
100ns pulse width, 0.1% duty cycle
-30
3
A
Switch Output Isolation Diode
Current
300ns pulse width, 2% duty cycle
(Figure 1)
2
A
SWITCH DYNAMIC CHARACTERISTICS
Turn-On Time
tON
VSW_ = VPP - 10V, RL = 10kI,
VNN = -40V to -160V (Figure 1)
5
Fs
Turn-Off Time
tOFF
VSW_ = VPP - 10V, RL = 10kI,
VNN = -40V to -160V (Figure 1)
5
Fs
Output Switching Frequency
fSW
Duty cycle = 50%
50
kHz
Off-Isolation
VISO
f = 5MHz, RL = 1kI, CL = 15pF (Figure 1)
f = 5MHz, RL = 50I (Figure 1)
-50
Crosstalk
VCT
f = 5MHz, RL = 50I (Figure 1)
-80
dB
-77
dB
Switch Off-Capacitance
(Note 4)
CSW_(OFF)
VSW_ = 0V, f = 1MHz
4
11
18
pF
Switch On-Capacitance
(Note 4)
CSW_(ON)
VSW_ = 0V, f = 1MHz
20
36
56
pF
Output Voltage Spike (Note 4)
Small-Signal Analog Bandwidth
VSPK
fBW
RL = 50I (Figure 1)
VPP = +100V, VNN = -100V, CL = 200pF
-500
+250
20
mV
MHz
_______________________________________________________________________________________ 3
MAX14805/MAX14806
ELECTRICAL CHARACTERISTICS (continued)
MAX14805/MAX14806
16-Channel (Two Banks of 8-Channel),
High-Voltage Analog Switches
ELECTRICAL CHARACTERISTICS (continued)
(VDD = +2.7V to +5.5V, VPP = +40V to (VNN + 200V), VNN = -40V to -160V, TA = TMIN to TMAX, unless otherwise noted. Typical
values are at TA = +25NC.) (Note 2)
PARAMETER
Charge Injection
SYMBOL
Q
LOGIC LEVELS (DIN1, DIN2, LE)
Logic-Input Low Voltage
VIL
Logic-Input High Voltage
VIH
Logic-Input Capacitance
CIN
Logic-Input Leakage Current
IIN
CONDITIONS
MIN
TYP
VPP = +40V, VNN = -160V, VSW_ = 0V
(Figure 1)
650
VPP = +100V, VNN = -100V, VSW_ = 0V
(Figure 1)
450
VPP = +160V, VNN = -40V, VSW_ = 0V
(Figure 1)
250
MAX
pC
0.75
VDD 0.75
-1
UNITS
V
V
10
pF
+1
FA
LOGIC TIMING (See Timing Diagram, Figure 2)
Setup Time
tSD
Hold Time
tHOLD
Time Width of LE
tWLE
30
ns
30
30
ns
ns
Note 2: A
ll devices are 100% tested at TA = +85NC. Limits over the operating temperature range are guaranteed by design and
characterization.
Note 3: The analog signal input VSW_ must satisfy VNN P VSW_ P VPP or remain unconnected during power-up.
Note 4: Guaranteed by characterization; not production tested.
4 _______________________________________________________________________________________
16-Channel (Two Banks of 8-Channel),
High-Voltage Analog Switches
MAX14805/MAX14806
VPP - 10V
ISOL
VPP - 10V
VNN + 10V
SW_
SW_
VOUT
SW_
RL
100kΩ
VOUT
SW_
RL
100kΩ
SW_
MAX14805
MAX14806
MAX14805
MAX14806
VPP
VNN
VDD
VPP
VNN
5V
GND
MAX14805
MAX14806
VPP
VPP
VDD
VNN
VNN
GND
5V
VDD
VNN
VNN
GND
5V
VOUT = 10VP-P
AT 5MHz
SW_
SW_
VOUT
SW_
MAX14805
MAX14806
VDD
VPP
VNN
GND
VNN
VNN
5V
SW_
SW_
SW_
50Ω
MAX14805
MAX14806
MAX14805
MAX14806
VPP
VPP
VDD
VNN
VNN
GND
V
VISO = 20LOG OUT
VIN
OFF-ISOLATION
SW_
50Ω
IID
SW_
RL
VNN
VPP
tON/tOFF TEST CIRCUIT
VOUT = 10VP-P
AT 5MHz
VPP
VPP
DC OFFSET OFF
SWITCH-OFF LEAKAGE
VOUT
SW_
5V
VPP
VPP
VDD
VNN
VNN
GND
5V
V
VCT = 20LOG OUT
VIN
CROSSTALK
ISOLATION DIODE CURRENT
+VSPK
VOUT
VOUT
SW_
VOUT
SW_
-VSPK
1000pF
50Ω
SW_
VSW_
SW_
RL
1kΩ
MAX14805
MAX14806
VPP
VPP
VDD
VNN
VNN
GND
Q = 1000pF x VOUT
VDD
MAX14805
MAX14806
VPP
VPP
VDD
VNN
VNN
GND
5V
OUTPUT VOLTAGE SPIKE
CHARGE INJECTION
Figure 1. Test Circuits
_______________________________________________________________________________________ 5
Typical Operating Characteristics
(VDD = +3V, VPP = +100V, VNN = -100V, TA = +25NC, unless otherwise noted.)
VPP = +100V, VNN = -100V
60
50
VPP = +40V, VNN = -160V
40
30
20
80
TA = +85°C
60
TA = +25°C
40
TA = -40°C
20
MAX14805/6 toc03
5
4
3
tOFF
2
1
tON
10
0
0
-100
-50
0
50
100
150
0
50
100
-90
-60
-30
0
30
60
VNO (V)
OFF-ISOLATION vs. FREQUENCY
LEAKAGE CURRENT vs. TEMPERATURE
LOGIC SUPPLY CURRENT
vs. SUPPLY VOLTAGE
TA = +25°C
60
ICOM_(ON)(VCOM = -90V)
40
20
TA = -40°C
0.01
0.1
1
10
ICOM_(ON)(VCOM = +90V)
ICOM_(OFF)(VCOM = 0V)
ICOM_(ON)(VCOM = 0V)
ICOM_(OFF)(VCOM = +90V)
-40
-15
10
35
60
TA = +25°C
TA = +85°C
0.6
0.4
TA = -40°C
0
85
3.1
2.7
IPPQ
0.10
0.05
INNQ
8
SUPPLY CURRENT (mA)
0.15
3.5
3.9
ALL SWITCHES SWITCHING
TA = +25°C
6
4
IPPD
2
INND
0
0
-40
-15
10
35
TEMPERATURE (°C)
60
85
4.3
4.7
VDD SUPPLY VOLTAGE (V)
HIGH-VOLTAGE SUPPLY CURRENT
vs. SWITCHING FREQUENCY
MAX14805/6 toc07
VPP = +100V
VNN = -100V
0
10
90
0.8
TEMPERATURE (°C)
HIGH-VOLTAGE SUPPLY CURRENT
vs. TEMPERATURE
SUPPLY CURRENT (µA)
1.0
0.2
0
100
FREQUENCY (MHz)
0.20
1.2
MAX14805/6 toc08
TA = +85°C
ICOM_(OFF)(VCOM = -90V)
IDDQ SUPPLY CURRENT (µA)
MAX14805/6 toc04
-40
80
MAX14805/6 toc05
VSW_ (V)
-20
-80
0.001
-50
VSW_ (V)
0
-60
0
-100
LEAKAGE CURRENT (nA)
-150
MAX14805/6 toc06
70
VPP = +100V, VNN = -100V
100
ON-RESISTANCE (Ω)
ON-RESISTANCE (Ω)
80
120
TURN-ON/TURN-OFF TIME
vs. ANALOG SIGNAL VOLTAGE
TURN-ON/TURN-OFF TIME (µs)
VPP = +160V, VNN = -40V
90
MAX14805/6 toc01
100
ON-RESISTANCE
vs. ANALOG SIGNAL VOLTAGE
MAX14805/6 toc02
ON-RESISTANCE
vs. ANALOG SIGNAL VOLTAGE
OFF-ISOLATION (dB)
MAX14805/MAX14806
16-Channel (Two Banks of 8-Channel),
High-Voltage Analog Switches
20
30
40
50
DIN_ SWITCHING FREQUENCY (kHz)
6 _______________________________________________________________________________________
5.1
5.5
16-Channel (Two Banks of 8-Channel),
High-Voltage Analog Switches
SW5
SW5
SW6
SW6
SW7
SW7
SW8
SW8
SW9
SW9
SW10
SW10
36
35
34
33
32
31
30
29
28
27
26
25
TOP VIEW
SW4
37
24
N.C.
N.C.
38
23
SW11
SW4
39
22
SW11
N.C.
40
21
SW12
SW3
41
20
SW12
SW3
42
19
SW13
SW2
43
18
SW13
SW2
44
17
SW14
SW1
45
16
SW14
SW1
46
15
SW15
SW0
47
14
SW15
SW0
48
13
N.C.
3
4
5
6
7
8
9
10
11
12
N.C.
DIN1
LE
DIN2
N.C.
N.C.
VDD
GND
N.C.
2
N.C.
VPP
1
VNN
+
MAX14805
MAX14806
TQFP
(7mm × 7mm × 1.4mm)
Pin Description
PIN
NAME
FUNCTION
1
VNN
Negative High-Voltage Power Supply. Bypass VNN to GND with a 0.1FF or greater ceramic
capacitor as close as possible to the device.
2, 4, 8, 9, 12,
13, 24, 38, 40
N.C.
No Connection. Not internally connected.
3
VPP
Positive High-Voltage Power Supply. Bypass VPP to GND with a 0.1FF or greater ceramic capacitor as close as possible to the device.
5
DIN1
Data Input 1
6
7
LE
DIN2
Active-Low Latch Enable Input. Drive LE low to latch data input. Drive LE high to hold data.
Data Input 2
10
VDD
Digital Power Supply. Bypass VDD to GND with a 0.1FF or greater ceramic capacitor as close as
possible to the device.
11
GND
Ground
14, 15
SW15
Analog Switch Terminal 15
_______________________________________________________________________________________ 7
MAX14805/MAX14806
Pin Configuration
MAX14805/MAX14806
16-Channel (Two Banks of 8-Channel),
High-Voltage Analog Switches
Pin Description (continued)
PIN
NAME
16, 17
SW14
Analog Switch Terminal 14
FUNCTION
18, 19
SW13
Analog Switch Terminal 13
20, 21
SW12
Analog Switch Terminal 12
22, 23
SW11
Analog Switch Terminal 11
25, 26
SW10
Analog Switch Terminal 10
27, 28
SW9
Analog Switch Terminal 9
29, 30
SW8
Analog Switch Terminal 8
31, 32
SW7
Analog Switch Terminal 7
33, 34
SW6
Analog Switch Terminal 6
35, 36
SW5
Analog Switch Terminal 5
37, 39
SW4
Analog Switch Terminal 4
41, 42
SW3
Analog Switch Terminal 3
43, 44
SW2
Analog Switch Terminal 2
45, 46
SW1
Analog Switch Terminal 1
47, 48
SW0
Analog Switch Terminal 0
8 _______________________________________________________________________________________
16-Channel (Two Banks of 8-Channel),
High-Voltage Analog Switches
tHOLD
tWLE
50%
50%
VDD
LE
50%
0V
VDD
50%
DIN_
50%
0V
ON
50%
SW_
50%
OFF
tON
tOFF
Figure 2. Digital Control (DIN1/DIN2/LE) Timing
Table 1. Truth Table
CONTROL
ANALOG SWITCH
DIN1
DIN2
SW8–SW15
Low
LE
Low
SW0–SW7
Low
Off
Off
High
Low
Low
On
Off
Low
High
Low
Off
On
High
High
Low
On
X
X
High
On
Hold Previous State
X = Don’t care.
_______________________________________________________________________________________ 9
MAX14805/MAX14806
tSD
MAX14805/MAX14806
16-Channel (Two Banks of 8-Channel),
High-Voltage Analog Switches
Detailed Description
The MAX14805/MAX14806 provide high-voltage switching on 16 channels for ultrasonic imaging. Both devices
are ideal for the following applications: bank selection in
biplane or triplane ultrasound probes and relays replacement in medical ultrasound systems. The devices utilize
200V process technology to provide 16 high-voltage,
low-charge injection SPST switches, controlled by a
digital interface.
The MAX14805/MAX14806’s output switches are configured as two sets of eight SPST analog switches. The
switches are controlled by two input logic controls, DIN1
and DIN2 (respectively for switch 0 to 7 and switch 8
to 15). The MAX14806 features integrated 40kI bleed
resistors on each switch terminal that help to reduce
voltage buildup in capacitive loads such as piezoelectric
elements.
The MAX14805/MAX14806 operate with a wide range of
high-voltage supplies, including VPP/VNN = +100V/-100V,
+200V/0V, and +40V/-160V. The digital interface operates from a separate VDD supply from +2.7V to +5.5V.
Digital inputs DIN1, DIN2, and LE operate on the VDD
supply voltage.
The MAX14805CCM+ is a drop-in replacement for the
Supertex HV2631. The MAX14806CCM+ is a drop-in
replacement for the Supertex HV2731.
Analog Switch
The MAX14805/MAX14806 allow a peak-to-peak analog
signal range from VNN to (VPP - 10V). During power-up
and power-down, all analog switch inputs (SW_) must be
unconnected or satisfy VNN P VSW_ P VPP.
High-Voltage Supplies
The MAX14805/MAX14806 allow a wide range of highvoltage supplies. The devices operate with VNN from
-160V to 0V and VPP from +40V to (VNN + 220V). When
VNN is connected to GND (single-supply applications),
the devices operate with VPP up to +200V. The VPP and
VNN high-voltage supplies are not required to be symmetrical, but the voltage difference (VPP - VNN) must not
exceed 230V.
Bleed Resistors (MAX14806)
The MAX14806 features integrated 40kI bleed resistors to discharge capacitive loads such as piezoelectric
transducers. Each analog switch terminal is connected
to GND with a bleed resistor.
Data Input (DIN1/DIN2)
DIN1/DIN2 control the on/off state of the analog switches.
DIN1 controls SW0–SW7 and DIN2 controls SW8–SW15
(see Table 1 and Figure 2). DIN1 and DIN2 operate on
the VDD supply voltage.
Latch Enable (LE)
Drive LE logic-low to latch DIN1/DIN2 data input (see
Figure 2). Drive LE logic-high to hold data. The LE input
operates on the VDD supply voltage.
Applications Information
For medical ultrasound applications, see Figures 3 and 4.
Supply Sequencing and Bypassing
The MAX14805/MAX14806 do not require special
sequencing of the VDD, VPP, and VNN supply voltages;
however, analog switch inputs must be unconnected or
satisfy VNN P VSW_ P VPP during power-up and powerdown. Bypass VDD, VPP, and VNN to GND with a 0.1FF
ceramic capacitor as close as possible to the device.
10
�������������������������������������������������������������������������������������
16-Channel (Two Banks of 8-Channel),
High-Voltage Analog Switches
MAINFRAME
HIGH-VOLTAGE TRANSMIT
1 PER CHANNEL
PROBES
PROBE SELECTION
2 TO 4 PROBES
CABLE
1 PER CHANNEL
MAX14805
MAX14806
±100V MAX
TRANSDUCERS
±1A TO ±2A MAX
+V
10mA TYP
LOW-VOLTAGE RECEIVE
64 TO 128 CHANNELS
PROBE
A
±1V MAX
HIGH-VOLTAGE
ISOLATION
-V
PROBE
B
Figure 3. Relay Replacement Application in Medical System
______________________________________________________________________________________ 11
MAX14805/MAX14806
Application Diagram
MAX14805/MAX14806
16-Channel (Two Banks of 8-Channel),
High-Voltage Analog Switches
Application Diagram (continued)
MAINFRAME
PROBES
PROBE SELECTION
2 TO 4 PROBES
HIGH-VOLTAGE TRANSMIT
1 PER CHANNEL
CABLE
1 PER CHANNEL
±100V MAX
MAX14805
MAX14806
TRANSDUCERS
TWO BANKS OF
ELEMENTS
±1A TO ±2A MAX
RELAY
1 RELAY/CH/PROBE
PROBE
A
BANK 1
128 OR MORE
ELEMENTS
PROBE
B
+V
BANK 2
128 OR MORE
ELEMENTS
10mA TYP
LOW-VOLTAGE RECEIVE
64 TO 128 CHANNELS
PROBE
C
±1V MAX
HIGH-VOLTAGE
ISOLATION
PROBE
D
-V
Figure 4. Probe Banks Selection in Biplane or Triplane Probe
12
�������������������������������������������������������������������������������������
16-Channel (Two Banks of 8-Channel),
High-Voltage Analog Switches
VDD
LE
DIN1
VDD
VPP
VPP
LATCH
LEVEL
SHIFTER 1
GND
VNN
SW0
*
VNN
SW0
*
VNN
SW7
*
VNN
SW7
*
GND
VDD
DIN2
VNN
VPP
LATCH
LEVEL
SHIFTER 2
GND
VNN
SW8
*
VNN
SW8
*
VNN
SW15
*
MAX14805
MAX14806
VNN
SW15
*
VNN
GND
VNN
*BLEED RESISTORS AVAILABLE ON THE MAX14806 ONLY.
Chip Information
PROCESS: BiCMOS
Package Information
For the latest package outline information and land patterns,
go to www.maxim-ic.com/packages. Note that a “+”, “#”, or
“-“ in the package code indicates RoHS status only. Package
drawings may show a different suffix character, but the drawing
pertains to the package regardless of RoHS status.
PACKAGE TYPE
PACKAGE CODE
DOCUMENT NO.
48 TQFP
C48-6
21-0054
______________________________________________________________________________________ 13
MAX14805/MAX14806
Functional Diagram
MAX14805/MAX14806
16-Channel (Two Banks of 8-Channel),
High-Voltage Analog Switches
Revision History
REVISION
NUMBER
REVISION
DATE
0
4/10
DESCRIPTION
Initial release
PAGES
CHANGED
—
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied.
Maxim reserves the right to change the circuitry and specifications without notice at any time.
14
© 2010
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.
工商网监
湘ICP备2023018690号
