BTP-53BGCH-XX-15

BriLux 1W Light Source BTP-53XXCH-XX-XX Package Dimension Features Highest Lumen Per Watt Long Operational Life More Energy Efficient IC Compatible Low DC Voltage Superior ESD Protection Smallest Footprint Applications Accent Lighting Automotive Exterior/Interior Light High Power Back Light Reading Light Marine/Miner ’s Lighting Portable Lighting inch Tolerance: ± mm Unit: ± 0.01 0.25 Optical Characteristics at Ta=25ºC PART NUMBER LED CHIP MATERIAL Lens Color Water Clear Water Clear Water Clear Water Clear Water Clear Water Clear Water Clear Water Clear Water Clear Water Clear Wavelength/CCT Range (nm/K) Drive Voltage Luminous VIEW ANGLE Flux @350mA(lm) 2θ1/2 Typ. 15 lm 15 lm 15 lm 5 lm 6 lm 8 lm 15 lm 20 lm 25 lm 20 lm (deg) Min/Max 620~635 600~620 585~595 450~460 460~475 475~485 495~510 510~520 520~530 5000K~8000K Typ. 2.85V 2.85V 2.85V 3.40V 3.40V 3.40V 3.40V 3.40V 3.40V 3.40V BTP-53NRCH-XX-15 BTP-53AMCH-XX-15 BTP-53YECH-XX-15 BTP-53DBCH-XX-05 BTP-53BLCH-XX-06 BTP-53GBCH-XX-08 BTP-53BGCH-XX-15 BTP-53GMCH-XX-20 BTP-53PGCH-XX-25 BTP-53WHCH-XX-20 AlInGaP AlInGaP AlInGaP AlInGaN AlInGaN AlInGaN AlInGaN AlInGaN AlInGaN AlInGaN 60 60 60 60 60 60 60 60 60 60 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com BriLux 1W Light Source BTP-53XXCH-XX-XX Absolute Maximum Ratings at Ta=25ºC Parameter White/Green/Cyan/Blue Red/Amber/Yellow Power Dissipation (mW) DC Forward Current (mA) [1] 1000 350 500 350 5 10 120 100 -40 to +100 260 for 5 seconds max 450 150 300 150 5 10 120 100 -40 to +100 260 for 5 seconds max Peak Pulsed Forward Current (mA) Average Forward Current (mA) Reverse Voltage (V) Reverse Current (uA) LED Junction Temperature (°C) Al-PCB Temperature (°C) [3] Storage Temperature (°C) Soldering Temperature (°C)[4] Application Notes: 1. Proper forward current must be observed to maintain the junction temperature below maximum rating 2. Although all products listed are class one ESD protection (+/- 1KV by HBM mode), care must be fully taken when handling products 3. Measured at back of aluminium PCB without additional heat sink. We recommend mounting BriLux light source directly to heat sink with fasteners for best performance. 4. 5. Measured at contact terminals. Specification is subjected to change without notice. DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com BriLux 1W Light Source BTP-53XXCH-XX-XX Typical Electro-Optical Characteristics Curves at Ta=25ºC (Red/Yellow/Blue/Green) DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com BriLux 1W Light Source BTP-53XXCH-XX-XX Typical Electro-Optical Characteristics Curves at Ta=25ºC (White) White BriLux DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com