PS6

Présente / Presents: DB LECTRO Inc. 3755 Place Java, Suite 140, Brossard, Québec, J4Y 0E4, Canada - T: 1-450-444-1424 / F: 1-450-444-4714 / www.dblectro.com NHG RELAYS PS PS R C haracteristics Electrostatic capacitance Between open Contacts Between coil & Contacts Between Contact Poles Insulation Resistance Dielectric Strength Between open Contacts Between coil & Contacts Between Contact Poles Surge Withstand Voltage Between open Contacts Between coil & Contacts Between Contact Poles Shock resistance 1000VAC 1min 1000VAC 1min 1000VAC 1min 1500V 1500V 2500V Functional:500m/s 2 11ms; Survival:1000 m/s2 6ms 10~55Hz Double amplitude Functional 3mm Survival:5mm 5N 235 2 3 0.5s -40~85 (-40~185 F) 1.5g of IEC255-19-1 and minimum sample size 24. Item 6 of IEC255-5 Item 6 of IEC255-5 Item 6 of IEC255-5 FCC68 FCC68 FCC68 IEC68-2-27 Test Ea IEC68-2-6 Test Fc IEC68-2-21 Test Ua1 IEC68-2-20 Test Ta method 1 Approx.0.4pF Approx.0.9pF Approx.0.2pF 1 000M m in (at 500VDC) Item 3.41 of IEC255-7 Item 3.41 of IEC255-7 Item 3.41 of IEC255-7 Item 7 of IEC255-5 1 4.2 9.3 5.3 C US E158859 R50044271 Features Surface mount Type with “L ” shaped Terminals. Conforms to FCC Part 68 1.5kV Surge and Dielectric 1000VAC. Monostable or bistable relays Single and double Coil magnet latching Type available. Application for Telecommunication Equipment,Office Equipment, Security Alarm Systems, Measuring instruments, Medical Monitoring Equipment,Audio Visual Equipment, Flight Simulator,Sensor Control. O rdering Information PS L 12 W 3 Coil rated voltage(V) DC:3,4.5,5,6,9,12,24 4 Contact material Nil: AgPd W: AgNi 1 2 3 4 1 Part number PS 2 Operating function Nil: Single Side Stable L:1 Coil Latching K:2 Coil Latching Vibration resistance Terminals strength Solderability Temperature Range Mass Contact Data C ontact Arrangement Contact Material Contact Rating (resistive) Max. Switching Power Max. Switching Voltage Contact Resistance or Voltage drop Operation al life Electrical Mechanical 2C DPDT(B-M) Bifurcated Crossbar AgPd(Stationary Contact: Gold clad ) AgNi(Gold clad 1A,2A/30VDC; 0.5A/125VAC 60W 62.5VA M in. Switching load 0.01mA/10mV 220VDC 250VAC Max. Switching Current:2A 5 0m 2 10 5 (DC AgPd);1 10 5(DC AgNi) 1 10 5 (AC) 108 Item 3.12 of IEC255-7 Item 3.30 of IEC255-7 Item 3.31 of IEC255-7 DC or peak AC open circuit are not Reference Value Qualification inspection: P erform the qualification test as specified in the table Safety approvals Safety approval Load UL&CUR 1A,2A/30VDC 0.5A/125VAC TU V 1A/30VDC 0.5A/125VAC C AUTION: R elays previously tested or used above 10mA resistive at 6V maximum recommended for subsequent use in low level applications. Dimensions mm/inch Coil Parameter 0.25 0.01 7.62 0.3 B 11.5 0.453 0.020 1.5 0.059 0.68 0.027 Index Mark Rated 3 4.5 5 6 9 12 24 3 4.5 5 6 9 12 24 3 4.5 5 6 9 12 24 Max. 7.5 11.25 12.5 15.0 22.5 30.0 48.0 8.7 13.0 14.5 17.4 26.1 34.8 57.6 9.3max. 0.366max. Dash numbers PS-003 PS-004 PS-005 PS-006 PS-009 PS-012 PS-024 Coil resistance 10% 64.3 144.6 178 257 579 1028 2880 90 202.5 250 360 810 1440 3840 S et Coil Reset Coil Pick up voltage VDC(max) (75%of rated voltage ) 2.25 3.38 3.75 4.50 6.75 9.00 18.0 2.25 3.38 3.75 4.50 6.75 9.00 18.0 2.25 3.38 3.75 4.50 6.75 9.00 18.0 Release voltage VDC(min) (10% of rated voltage) 0.3 0.45 0.5 0.6 0.9 1.2 2.4 Coil power W 0.14 0.14 0.14 0.14 0.14 0.14 0.20 0.10 0.10 0.10 0.10 0.10 0.10 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.30 Operate Time ms Release /Reset Time ms 5.3 +0.4 0.209 +0.016 0.5 0.02 2.02 0.08 14.2max. 0.559max. 2.54 0.1 Stand-off A Approx.2 Approx.1 Dimensions 1 0.039 3 0.118 1 Coil Latching PSL-003 P SL-004 PSL-005 PSL-006 PSL-009 PSL-012 PSL-024 Reset(Max) -2.25 -3.38 -3.75 -4.50 -6.75 -9.00 -18.0 Reset 2 0.079 1 Single Side stable 2 3 4 5 1 SR 1 Coil latching 2 3 4 5 1 2 Coil latching 2 3 4 5 Approx.2 Approx.2 S R S: Set R: Reset (Bottom View) 2 Coil Latching PSK-003 PSK-004 PSK-005 PSK-006 PSK-009 PSK-012 PSK-024 6 9 10 12 18 24 36 R eset(Max) 2.25 3.38 3.75 4.50 6.75 9.00 18.0 Reset 10 9 8 7 6 10 9 8 7 6 10 9 8 7 6 9 56 0.376 . 6.2 +0.4 0.244 0.016 2.54 0.1 Coil voltage VDC 45 101 125 180 405 720 1920 45 101 125 180 405 720 1920 Index mark (De-energized Position) Index mark (Reset Position) Index mark (Reset Position) 0.6 0.024 1.2 0.047 Approx.2 Approx.2 Wiring diagram (Bottom view) S oldering Pad (for Terminal) T emporary glue Pad (for Stand-off A or B) Tolerance 0.1/ 0.004 CAUTION: 1 .The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. 2.Pickup and release(reset) voltage are for test purposes only and are not to be used as design criteria. 3.When latching relays are installed in equipment, the latch and reset coil should not be pulsed simultaneously. Coil should not be pulsed with less than the nominal coil voltage and pulse width should be a minimum of three times the specified operate time of the relay. If these conditions are not followed, it is possible for the relay to be in the magnetically neutral position . NOTES 1).Dimensions are in millimeters. 2).Inch equivalents are given for general information only. Mounting (Bottom view) N ingbo Huaguan R elay Corporation LTD.