OPT-155A2H4AH

OPT-155Axxxx 155Mbps 1x9 SC/ST Duplex Optical Transceiver Module for Fast Ethernet, ATM, SONET/SDH STM-1/OC-3 Features： Full Compliance with the Optical Performance Requirements of the ATM 100Mbps and 100 Base-FX Version of IEEE 802.3u. Industry Standard 1x9 Footprint and Duplex SC or ST Connector Interface. Single 5V（OPT-155A1Hxx）or 3.3V （OPT-155A2Hxx）Power Supply. PECL Differential Inputs and Outputs. PECL Receiver Signal Detect Indicator. Wave Solder and Aqueous Wash Process Compatible. RoHS Compliant per Directive 2002/95/EC Description： The OPT-155AxHxx series are 1x9 optical transceiver modules designed expressly for high-speed communication applications that require rates of up to 155Mbps. They are all compliant with the SONET/SDH standards. The OPT-155AxHxx transceivers are supplied in industry standard 1x9 SIP package style with either duplex SC or duplex ST connector. Moreover the OPT-155AxHx series also include a Signal-Detect circuit that provides PECL logic output state. The OPT-155AxHxx series meet Class-1 eye safety standard and effective distance up to 2Km. The transmitter sections utilize 1310nm Surface Emitting InGaAsP LEDs. These LEDs are packaged in the optical subassembly portion of the transmitter section. A custom silicon IC that converts differential PECL logical signals into an analog LED driving current then drive it. The receiver sections utilize InGaAs PIN photodiodes coupled into a custom silicon transimpedance preamplifier IC. These are packaged in the optical subassembly portion of receiver. These PIN / Preamplifier combinations are coupled into a custom quantizer IC which provides the final pulse shaping for the logic output and the Signal Detect function. The data output is differential. The signal detect output is single-ended. Application： Multimode Fiber Backbone Links. Fast Ethernet and ATM Compatible. Multimode Fiber Media Converter. www.deltaww.com DELTA ELECTRONICS, INC. 1 Sep., 2006 Rev.：0E OPT-155Axxxx Absolute Maximum Ratings Parameter Storage Temperature Lead Soldering Temperature Lead Soldering Time Supply Voltage Symbol Ts TSOLD tSOLD VCC Min. -40 Typ. Max. 85 260 10 6 Unit ºC ºC Sec. V Note 0 Recommended Operating Conditions Parameter Data Rate Ambient Operating Temperature Supply Voltage OPT-155A1Hxx OPT-155A2Hxx Note: See ordering information for detail Symbol TA VCC Min. 100 0 4.75 3.15 Typ. 155.52 Max. 200 70 5.25 3.45 Unit Mbps ºC V Note 1 5 3.3 Electrical Characteristics Parameter Transmitter Transmitter Data Input Voltage-Low Transmitter Data Input Voltage-High Receiver Data Output Voltage-Low Data Output Voltage-High SD Output Voltage-Low SD Output Voltage-High Symbol VIL-VCC VIH-VCC VOL-VCC VOH-VCC VSDH-VCC VSDL-VCC Min. -1.81 -1.16 -1.95 -1.045 -1.95 -1.045 Typ. Max. -1.48 -0.88 -1.62 -0.74 -1.62 -0.74 Unit V V V V V V Note ECL Family ECL Family Optical Characteristics （Data Rate = 155.52Mbps, PRBS=223-1, NRZ, 62.5/125um MMF） Parameter Symbol Min. Typ. Transmitter Supply Current Mean Launch Power 62.5/125μm, NA=0.275 Fiber 50/125μm, NA=0.20 Fiber Optical Extinction Ratio Center Wavelength Spectral Width (RMS) Optical Risetime / Falltime Output Eye Diagram Receiver Supply Current Sensitivity Input Optical Wavelength Signal Detect-Asserted Signal Detect-DeAsserted Signal Detect-Hysteresis Overload Icc PO E.R. λC σ tr/tf -20 -22.5 9 Max. 185 165 -14 -14 Unit mA dBm Note OPT-155A1 Series OPT-155A2 Series dB 1310 nm nm 200 10%～90% 3.0 ns Compliant with ITU-T recommendation G.957 145 120 -31 1100 -45 0.5 -14 1600 -31 mA dBm nm dBm dBm dB dBm OPT-155A1 Series OPT-155A2 Series Icc PIN λ PA PD PA-PD PO www.deltaww.com DELTA ELECTRONICS, INC. 2 Sep., 2006 Rev.：0E OPT-155Axxxx Notes：The sensitivity should be tested at BER of 1×10-10 or better with an input signal consisting of 155Mb/s, NRZ, PRBS=223-1 and E.R.= 9dB. Mask of the eye diagram for the optical transmit signal www.deltaww.com DELTA ELECTRONICS, INC. 3 Sep., 2006 Rev.：0E OPT-155Axxxx Pin Definition： PIN 1 2 3 4 5 6 7 8 9 Symbol GND RD (+) RD (-) SD VccR VccT TD (-) TD (+) GND Functional description Receiver Signal Ground Receiver Data Out (LVPECL or PECL) Receiver Data Out Bar (LVPECL or PECL) Receiver Signal Detect (LVPECL or PECL) Receiver Power Supply Transmitter Power Supply Transmitter Data In Bar (LVPECL or PECL) Transmitter Data In (LVPECL or PECL) Transmitter Signal Ground Pin Descriptions: Pin 1 Receiver Signal Ground, GND Directly connect these pins to the ground plane. Pin 2 Receiver Data Out (LVPECL), RD (+) PECL logic family. Output external biased and internal dc coupled. Pin 3 Receiver Data Out Bar (LVPECL), RD (-) PECL logic family. Output external biased and internal dc coupled. Pin 4 Receiver Signal Detect (LVPECL/TTL), SD PECL/TTL logic family. Normal Operation: Logic “1” Output Fault Condition: Logic”0” Output Pin 5 Receiver Power Supply, VccR Provide +3.3/5V dc power supply. Pin 6 Transmitter Power Supply, VccT Provide +3.3/5V dc power supply. Pin 7 Transmitter Data In Bar (LVPECL), TD (-) Pin 7 Transmitter Data Input (LVPECL), TD (-) Pin 8 Transmitter Data In (LVPECL), TD (+) Pin 8 Transmitter Data Input Bar (LVPECL), TD (+) Pin 9 Transmitter Signal Ground, GND Directly connect these pins to the ground plane. www.deltaww.com DELTA ELECTRONICS, INC. 4 Sep., 2006 Rev.：0E OPT-155Axxxx Recommend Circuit Schematic for Internal DC Coupled Transceivers RX-VCC TX-VCC C3 C5 R1 R3 TX-GND RX-GND 9 8 7 6 5 4 3 2 1 R9 R5 R7 TD+ TD- RD+ RD- TX-VCC RX-VCC R2 R4 R10 R6 R8 SD Transceiver Top Niew R1=R3=R5=R7=R9=130 Ohm (3.3V), 82 Ohm (5V) VCC R2=R4=R6=R8=R10=82 Ohm (3.3V), 130 Ohm (5V) C3 L1 TX-VCC C1 C1=C2=C3=C5=C6=0.1 uF C4=10 uF L1=L2=1 uH or ferrite inductor C4 L2 RX-VCC C2 www.deltaww.com DELTA ELECTRONICS, INC. 5 Sep., 2006 Rev.：0E OPT-155Axxxx Package Outline： (1) OPT-155AxH1x Series with SC-type Connector www.deltaww.com DELTA ELECTRONICS, INC. 6 Sep., 2006 Rev.：0E OPT-155Axxxx (2) OPT-155AxH4x Series with ST-type Connector www.deltaww.com DELTA ELECTRONICS, INC. 7 Sep., 2006 Rev.：0E OPT-155Axxxx Regulatory Compliance Feature Electromagnetic Interference (EMI) Radio Frequency Electromagnetic Field Electrostatic Discharge to the Duplex LC Receptacle FCC Class B EN 55022 Class B (CISPR 22A) EN 61000-4-3 IEC 1000-4-3 EN 61000-4-2 IEC 1000-4-2 IEC 801.2 Electrostatic Discharge to the Electrical Pins Eye Safety MIL-STD-883E Method 3015.7 US FDA CDRH AEL Class 1 EN 60950: 2000 EN 60825-1: 1994+A11+A2 EN 60825-2: 2000 Component Recognition CDRH File # 0321539-00 TUV Certificate No. R50032471 (1) Satisfied with electrical characteristics of product spec. (2) No physical damage Reference Performance Underwriters Laboratories and UL File # E239394 Canadian Standards Association Joint Component Recognition for Information Technology Equipment Including Electrical Business Equipment Order information： OPT- 155X1X2X3X4X5X6X7 X1: Fiber A: Multi-mode 1310nm X5: RoHS Compliant Blank: Non-RoHS Compliant R: RoHS Compliant Performance Blank: Old Design A: New Design X2: Power Supply Voltage and SD Level 1: 5.0V, PECL SD Level 2: 3.3V, PECL SD Level X6: X3: Distance H: 2km, Multi-mode Data Coupling X4: 1: 1x9SC DC/DC 4: 1x9ST DC/DC X7: Temperature Blank: 0 to +70 degree C H: -10 to + 85 degree C T: -40 to + 85 degree C www.deltaww.com DELTA ELECTRONICS, INC. 8 Sep., 2006 Rev.：0E