5219768F

DIALIGHT PART NUMBER LED COLOR 521-9478F YELLOW/GREEN BI-COLOR 521-9459F RED/GREEN BI-COLOR GaAsP/GaP RED / GaP GREEN WHITE DIFF. 521-9768F RED/YELLOW BI-COLOR GaAsP/GaP RED / GaAsP/GaP YELLOW WHITE DIFF. REV LENS COLOR LED DIE WHITE DIFF. GaAsP/GaP YELLOW / GaP GREEN ECN NO REVISIONS DRN CKD APP KLJ A NEW RELEASE B ADDED LED DIE INFO. TO TABLE NO DATE MES 11-4-08 AJF KLJ NO 6-16-10 RoHS COMPLIANT 521-9XXXF Part Numbers with the "F" suffix ending are RoHS Compliant. For Example: 521-9768F Packaging is marked with "RoHS Compliant" label or equivalent markings. Parts can be wave soldered, dip soldered or hand soldered using typical lead-free soldering process with max 260°C temp. for 5 sec. 1.000 MIN [25,4] .175 [4,44] YELLOW CATHODE FOR YELLOW/GREEN BI-COLOR LED RED CATHODE FOR RED/GREEN BI-COLOR LED RED CATHODE FOR YELLOW/RED BI-COLOR LED .040 [1,02] .126 [3,2 ] .040 MIN [1,02] 1 .118 [3] .100 NOM [2,54] (SEE NOTE 2) 2 .040 [1,02] MAX .018 x .016 [0,45 x 0,40] TYP REF .205 #.020 [5,2 #0,5 ] OR .020 SQ. (FOR R/G BI-COLOR) [0,50] TYP REF NOTES: OPERATING CHARACTERISTICS AT 25 $ C AMBIENT LED PEAK DOMINANT VIEWING LUMINOUS INTENSITY FORWARD VOLTAGE WAVELENGTH WAVELENGTH ANGLE (mcd) @ IF =10 mA (V) @ IF =20 mA COLOR (nm) (nm) ( $) [*IF =20 mA] TYP RED/GREEN BI-COLOR RED 635 GREEN 565 YELLOW/GREEN YELLOW BI-COLOR GREEN RED/YELLOW BI-COLOR TYP 60 585 586 565 569 RED 630 YELLOW 585 TYP 80 80 MIN TYP TYP MAX 2.5 4.7 2.0 2.8 10 2.1 2.8 * 2.5 3.7 * 4.3 2.1 2.8 * 2.5 * 6.3 2.1 2.8 * 1.7 * 5.6 2.0 2.8 * 1.7 * 5.6 2.1 2.8 ABSOLUTE MAXIMUM RATINGS AT 25$ C AMBIENT POWER DISSIPATION R/G BI-COLOR RED 100 Y/G BI-COLOR R/Y BI-COLOR RED YELLOW 60 100 60 100 LENS COLOR: WHITE DIFFUSED LEAD SPACING MEASURED NEAR EPOXY PACKAGE. LEADS TO FIT INTO HOLES SPACED AS PER PATTERN. LEADS: SILVER (Ag) OVER COPPER (Cu) OVER NICKEL (Ni) ON COPPER (Cu). PIN NUMBERS FOR REFERENCE ONLY, DESIGNATION NON-EXISTENT ON PART. DIALIGHT PART NUMBERS: 521-9478F, 521-9459F, 521-9768F PACKAGING: BULK LABELING: BAGS TO BE IDENTIFIED WITH DIALIGHT P/N, QTY, DATE CODE, AND INTENSITY AND COLOR BIN CATEGORIES. 9. THIS ASSEMBLY CONTAINS ELECTROSTATIC DISCHARGE SENSITIVE DEVICES (ESDS). MAINTAIN ALL PRECAUTIONARY MEASURES DURING ASSEMBLY, HANDLING, AND STORAGE IN ACCORDANCE WITH IPC-A-610. THIS DRAWING AND THE CONTENTS HEREIN ARE CONFIDENTIAL AND THE SOLE PROPERTY OF DIALIGHT. REPRODUCTION OF THIS DRAWING OR CONSTRUCTION OF ANY PARTS WITHIN THIS DRAWING ARE FORBIDDEN WITHOUT THE WRITTEN CONSENT OF DIALIGHT. UNITS SCALE: 6.000 mW 30 30 20 30 30 20 mA PEAK FORWARD CURRENT (1/10 DUTY CYCLE, 10 ms PULSE WIDTH) 120 120 80 120 120 80 mA DERATING LINEAR FROM 50 C $ 0.4 0.4 0.25 0.4 0.4 0.25 mA/ $C CONTINUOUS FORWARD CURRENT 1 CATHODE FOR Y/G CATHODE FOR R/G CATHODE FOR Y/R LED SCHEMATIC GREEN YELLOW GREEN 100 PIN YEL RED RED PIN 2 GREEN CATHODE 1. 2. 3. 4. 5. 6. 7. 8. ATTENTION: OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES 5 V 260 $C ANGLES: OPERATING TEMPERATURE -55 TO +100 $C FINISH: STORAGE TEMPERATURE -55 TO +100 $C REVERSE VOLTAGE SOLDERING TEMPERATURE (.063" FROM BODY FOR 5 SECONDS) C-17675 TOLERANCES: UNLESS OTHERWISE SPECIFIED FRACTIONS: #1/64 DECIMALS (.XX): #.02 DECIMALS (.XXX): #.010 REV DRAWING NUMBER ALL DIM'S IN: INCHES (MM) TITLE B 3mm BI-COLOR LED RoHS COMPLIANT MATERIAL #3 $ 1501 ROUTE 34 SOUTH FARMINGDALE, NJ 07727 FSCM 83330 SHEET 1 OF 1 FAMILY TABLE: