BC856AW_2

BC856AW - BC858CW PNP SMALL SIGNAL SURFACE MOUNT TRANSISTOR Features • • • • • Ideally Suited for Automated Insertion Complementary NPN Types Available (BC846W-BC848W) For Switching and AF Amplifier Applications Lead Free/RoHS Compliant (Note 3) "Green" Device (Note 4 and 5) B A C SOT-323 Dim A BC Min 0.25 1.15 2.00 0.30 1.20 1.80 0.0 0.90 0.25 0.10 Max 0.40 1.35 2.20 0.40 1.40 2.20 0.10 1.00 0.40 0.18 B C D E G M E G H 0.65 Nominal Mechanical Data • • • • • • • • • Case: SOT-323 Case Material: Molded Plastic, "Green" Molding Compound, Note 5. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Solderable per MIL-STD-202, Method 208 Lead Free Plating (Matte Tin Finish annealed over Alloy 42 leadframe). Pin Connections: See Diagram Marking Code: See Table Below & Diagram on Page 3 Ordering & Date Code Information: See Page 3 Weight: 0.006 grams (approximate) Marking Code (Note 2) Marking Type K3A BC857CW K3B BC858AW K3V, K3A BC858BW K3W, K3B BC858CW K H J K J D F L L M 0° 8° α All Dimensions in mm Type BC856AW BC856BW BC857AW BC857BW Marking K3G K3J, K3A, K3V K3K, K3B, K3W K3L, K3G Maximum Ratings @TA = 25°C unless otherwise specified Symbol BC856 BC857 BC858 BC856 BC857 BC858 VCBO Value -80 -50 -30 -65 -45 -30 -5.0 -100 -200 -200 200 625 -65 to +150 Unit V Characteristic Collector-Base Voltage Collector-Emitter Voltage VCEO VEBO IC ICM IEM Pd RθJA Tj, TSTG V V mA mA mA mW °C/W °C Emitter-Base Voltage Collector Current Peak Collector Current Peak Emitter Current Power Dissipation (Note 1) Thermal Resistance, Junction to Ambient (Note 1) Operating and Storage Temperature Range Notes: 1. Device mounted on FR-4 PCB, 1 inch x 0.85 inch x 0.062 inch; pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 2. Current gain subgroup “C” is not available for BC856W. 3. No purposefully added lead. 4. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. 5. Product manufactured with Date Code 0627 (week 27, 2006) and newer are built with Green Molding Compound. Product manufactured prior to Date Code 0627 are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants. DS30251 Rev. 8 - 2 1 of 3 www.diodes.com BC856AW - BC858CW © Diodes Incorporated Electrical Characteristics @TA = 25°C unless otherwise specified Symbol BC856 BC857 BC858 BC856 BC857 BC858 A B C V(BR)CBO Min -80 -50 -30 -65 -45 -30 -5 125 220 420 — — — -600 — — — 100 — — Typ — — — — — — — 180 290 520 -75 -250 -700 -850 -650 — — — 200 3 — Max — — — — — — — 250 475 800 -300 -650 — -950 -750 -820 -15 -4.0 — 4.5 10 Unit V Test Condition IC = 10μA, IB = 0 Characteristic Collector-Base Breakdown Voltage (Note 6) Collector-Emitter Breakdown Voltage (Note 6) V(BR)CEO V(BR)EBO hFE VCE(SAT) VBE(SAT) VBE(ON) ICBO ICBO fT CCBO NF V V — mV mV mV nA µA MHz pF dB IC = 10mA, IB = 0 IE = 1μA, IC = 0 VCE = -5.0V, IC = -2.0mA IC = -10mA, IB = -0.5mA IC = -100mA, IB = -5.0mA IC = -10mA, IB = -0.5mA IC = -100mA, IB = -5.0mA VCE = -5.0V, IC = -2.0mA VCE = -5.0V, IC = -10mA VCB = -30V VCB = -30V, TA = 150°C VCE = -5.0V, IC = -10mA, f = 100MHz VCB = -10V, f = 1.0MHz VCE = -5.0V, IC = 200µA, RS = 2kΩ, f = 1kHz, Δf = 200Hz Emitter-Base Breakdown Voltage (Note 6) DC Current Gain (Note 6) Current Gain Group Collector-Emitter Saturation Voltage (Note 6) Base-Emitter Saturation Voltage (Note 6) Base-Emitter Voltage (Note 6) Collector-Cutoff Current (Note 6) Gain Bandwidth Product Collector-Base Capacitance Noise Figure Notes: 6. Short duration pulse test used to minimize self-heating effect. 250 0.5 VCE(SAT), COLLECTOR TO EMITTER SATURATION VOLTAGE (V) IC IB = 10 PD, POWER DISSIPATION (mW) 200 0.4 150 0.3 100 0.2 TA = 150°C T A = 25°C 50 0.1 T A = -50°C 0 0 25 50 75 100 125 150 175 TA, AMBIENT TEMPERATURE (°C) Fig. 1, Max Power Dissipation vs. Ambient Temperature 200 0 0.1 1,000 10 1 100 IC, COLLECTOR CURRENT (mA) Fig. 2 Collector Emitter Saturation Voltage vs. Collector Current DS30251 Rev. 8 - 2 2 of 3 www.diodes.com BC856AW - BC858CW © Diodes Incorporated 1,000 TA = 150°C 1,000 VCE = 5V 100 TA = 25°C T A = -50°C ft, GAIN BANDWIDTH PRODUCT (MHz) VCE = 5V hFE, DC CURRENT GAIN 100 10 10 100 1,000 IC, COLLECTOR CURRENT (mA) Fig. 3, DC Current Gain (Group B) vs. Collector Current 1 1 10 10 100 IC, COLLECTOR CURRENT (mA) Fig. 4, Gain Bandwidth Product vs. Collector Current 1 Ordering Information Device BC85xxW-7-F Notes: (Note 5 & 7) Packaging SOT-323 Shipping 3000/Tape & Reel 7. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information XXX XXX = Product Type Marking Code (See Page 1), e.g. K3A = BC856AW YM = Date Code Marking Y = Year ex: N = 2002 M = Month ex: 9 = September Date Code Key Year Code Month Code 1998 J Jan 1 1999 K Feb 2 2000 L 2001 M Mar 3 YM 2002 N Apr 4 2003 P May 5 2004 R Jun 6 2005 S 2006 T Jul 7 2007 U Aug 8 2008 V Sep 9 2009 W Oct O 2010 X 2011 Y Nov N 2012 Z Dec D IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30251 Rev. 8 - 2 3 of 3 www.diodes.com BC856AW - BC858CW © Diodes Incorporated