SBL3060CTP

SBL3060CTP 30A SCHOTTKY BARRIER RECTIFIER Please click here to visit our online spice models database. Features • • • • • Low Forward Voltage Drop Soft, Fast Switching Capability Schottky Barrier Chip ITO-220S Heat Sink Tab Electrically Isolated from Cathode UL Approval in Accordance with UL 1557, Reference No. E94661 Mechanical Data • • • • • • Case: ITO-220S Case Material: Molded Plastic, UL Flammability Classification Rating 94V-0 Terminals: Matte Tin Finish annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Marking Information: See Page 2 Ordering Information: See Page 2 Weight: 1.335 grams (approximate) 4 Isolated 2 Common 1 Cathode 3 Anode Anode Top View Bottom View Package Pin Out Configuration Maximum Ratings (Per Leg) @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Output Current (Per Leg) (Total) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Isolation Voltage From Terminal Heatsink t = 1 min. Symbol VRRM VRWM VRM IO IFSM VAC Value 60 15 30 200 2000 Unit V A A V Thermal Characteristics (Per Leg) Characteristic Typical Thermal Resistance, Junction to Case Operating and Storage Temperature Range Symbol RθJC TJ, TSTG Value 3 -65 to +150 Unit °C/W ºC Electrical Characteristics (Per Leg) @TA = 25°C unless otherwise specified Characteristic Forward Voltage Drop Leakage Current (Note 1) Notes: 1. Short duration pulse test used to minimize self-heating effect. Symbol VF IR Min - Typ - Max 0.73 1 75 Unit V mA Test Condition IF = 15A, TJ = 25ºC VR = 60V, TJ = 25ºC VR = 60V, TJ = 100ºC SBL3060 Document number: DS31463 Rev. 5 - 2 1 of 3 www.diodes.com December 2009 © Diodes Incorporated SBL3060CTP IF, INSTANTANEOUS FORWARD CURRENT (A) IR, INSTANTANEOUS REVERSE CURRENT (µA) 100 100,000 TA = 150°C 10,000 10 TA = 150°C TA = 125°C TA = 125°C 1,000 TA = 85°C 1 TA = 85°C 100 T A = 25°C 0.1 TA = -55°C T A = 25°C 10 0.01 0 200 400 600 800 1,000 VF, INSTANTANEOUS FORWARD VOLTAGE (mV) Fig. 1 Typical Forward Characteristics 30 RθJA = RθJC Total Device 1 0 10 20 30 40 50 60 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 2 Typical Reverse Characteristics IF(AV), AVERAGE FORWARD CURRENT (A) 27 24 21 18 15 12 9 6 3 0 25 R θJA = 15°C/W Per Element Note 3 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) Fig. 3 Forward Current Derating Curve 175 Ordering Information Part Number SBL3060CTP Notes: (Note 2) Case ITO-220S Packaging 50 pieces/tube 2. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information SBL 3060CTP YYWW AB SBL3060CTP = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last two digits of year (ex: 08 = 2008) WW = Week (01-52) SBL3060 Document number: DS31463 Rev. 5 - 2 2 of 3 www.diodes.com December 2009 © Diodes Incorporated SBL3060CTP Package Outline Dimensions ITO-220S DIM. E Q D D1 + ØP Ø1.5 Dp 0.1 max 7 ° Ref MIN. MAX. TYP. A A1 H1 + D2 1.7 Ref 5° Ref 5° Ref E1 A2 L1 b2 L e 5 ° Ref b 5 ° Ref c e1 A 4.52 4.62 4.57 A1 0.51 1.39 − A2 2.57 2.77 2.67 b 0.72 0.95 0.84 b2 1.15 1.34 1.26 c 0.356 0.61 − D 14.22 16.51 15.00 D1 8.60 8.80 8.70 D2 13.68 14.08 − e 2.49 2.59 2.54 e1 4.98 5.18 5.08 E 10.01 10.21 10.11 E1 6.86 8.89 − H1 5.85 6.85 − L 13.30 13.90 13.60 L1 4.00 − − P 3.54 4.08 − Q 2.54 3.42 − All Dimensions in mm IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2009, Diodes Incorporated www.diodes.com SBL3060 Document number: DS31463 Rev. 5 - 2 3 of 3 www.diodes.com December 2009 © Diodes Incorporated