SBR15U30SP5

SBR15U30SP5 15A SBR® SUPER BARRIER RECTIFIER PowerDI®5 Features • • • • • • • Designed as Bypass Diodes for Solar Panels Selectively Rated for 200ºC Maximum Junction Temperature for High Thermal Reliability Patented Super Barrier Rectifier Technology High Forward Surge Capability Ultra Low Forward Voltage Drop Excellent High Temperature Stability Lead Free Finish, RoHS Compliant (Note 1) Mechanical Data • • • • • Case: PowerDI 5 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish – Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Weight: 0.093 grams (approximate) ® N EW PRODUCT LEFT PIN RIGHT PIN BOTTOMSIDE HEAT SINK Top View Bottom View Note: Pins Left & Right must be electrically connected at the printed circuit board. Ordering Information (Note 2) Part Number SBR15U30SP5-13 Notes: Case ® PowerDI 5 Packaging 5000/Tape & Reel 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes. 2. For packaging details, go to our website at http://www.diodes.com. Marking Information S15U30S YYWWK S15U30S = Product Type Marking Code = Manufacturers’ Code Marking K = Factory Designator YYWW = Date Code Marking YY = Last Two Digits of Year (ex: 08 for 2008) WW = Week code (01 - 53) SBR and PowerDI are registered trademarks of Diodes Incorporated. SBR15U30SP5 Document number: DS32154 Rev. 2 - 2 1 of 4 www.diodes.com January 2011 © Diodes Incorporated SBR15U30SP5 Maximum Ratings @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VRM VR(RMS) IO IFSM Value 30 21 15 250 Unit V V A A N EW PRODUCT Thermal Characteristics Characteristic Maximum Thermal Resistance Thermal Resistance Junction to Ambient (Note 3) Operating Temperature Range Storage Temperature Range VR ≤ 80% VRRM VR ≤ 50% VRRM DC Forward Mode Symbol RθJA TJ TSTG Value 26 -65 to +150 ≤180 ≤200 -65 to +175 Unit ºC/W ºC ºC Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic Forward Voltage Drop (Per Leg) Leakage Current (Note 4) Notes: Symbol VF IR Min - Typ - Max 0.49 0.42 0.5 100 Unit V mA Test Condition IF = 15A, TJ = 25ºC IF = 15A, TJ = 125ºC VR = 30V, TJ = 25ºC VR = 30V, TJ = 125ºC 3. FR-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com 4. Short duration pulse test used to minimize self-heating effect. 5 PD, POWER DISSIPATION (W) IF, INSTANTANEOUS FORWARD CURRENT (A) 6 100 10 TA = 150°C TA = 125°C 4 1 T A = 85°C 3 0.1 2 0.01 TA = 25°C TA = -55°C 1 0.001 0 0 4 6 8 10 12 14 IF(AV) AVERAGE FORWARD CURRENT (A) Fig. 1 Forward Power Dissipation 2 0.0001 0 0.1 0.2 0.3 0.4 0.5 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics SBR and PowerDI are registered trademarks of Diodes Incorporated. SBR15U30SP5 Document number: DS32154 Rev. 2 - 2 2 of 4 www.diodes.com January 2011 © Diodes Incorporated SBR15U30SP5 IR, INSTANTANEOUS REVERSE CURRENT (uA) 10,000 TA = 125°C TA = 85°C 100,000 CT, TOTAL CAPACITANCE (pF) 10,000 100 TA = 25°C N EW PRODUCT 1,000 1 TA = -55°C 0.01 0 5 10 15 20 25 30 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics 100 0 10 15 20 25 30 VR, DC REVERSE VOLTAGE (V) Fig. 4 Total Capacitance vs. Reverse Voltage 5 TA, DERATED AMBIENT TEMPERATURE (°C) 175 20 IF(AV), AVERAGE FORWARD CURRENT (A) 150 125 15 RθJA = R θJC Per Element 100 10 RθJA = 26°C/W Per Element Note 3 75 50 5 25 0 25 0 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) Fig. 5 Forward Current Derating Curve 0 3 6 9 12 15 18 21 24 27 30 VR, DC REVERSE VOLTAGE (V) Fig. 6 Operating Temperature Derating Package Outline Dimensions A D b2 A2 D2 L E E1 E2 W L1 e b1 b1 A2 PowerDI 5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.054 Typ E 6.40 6.60 e 1.84 Typ E1 5.30 5.45 E2 3.549 Typ L 0.75 0.95 L1 0.50 0.65 W 1.10 1.41 All Dimensions in mm ® SBR and PowerDI are registered trademarks of Diodes Incorporated. SBR15U30SP5 Document number: DS32154 Rev. 2 - 2 3 of 4 www.diodes.com January 2011 © Diodes Incorporated SBR15U30SP5 Suggested Pad Layout X Y N EW PRODUCT Dimensions C G X X1 Y Y1 X1 (2x) G Value (in mm) 1.840 0.852 3.360 1.390 4.860 1.400 Y1 (2x) C IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2011, Diodes Incorporated www.diodes.com SBR and PowerDI are registered trademarks of Diodes Incorporated. SBR15U30SP5 Document number: DS32154 Rev. 2 - 2 4 of 4 www.diodes.com January 2011 © Diodes Incorporated