SF10HG-A

SPICE MODELS: SF10AG SF10BG SF10CG SF10DG SF10FG SF10GG SF10HG SF10JG SF10AG - SF10JG 1.0A SUPER-FAST GLASS PASSIVATED RECTIFIER Features · · · · · Glass Passivated Die Construction Super-Fast Switching for High Efficiency Surge Overload Rating to 30A Peak Low Reverse Leakage Current Lead Free Finish, RoHS Compliant (Note 4) A B A Mechanical Data · · · · · · · · Case: DO-41 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish - Tin. Plated Leads Solderable per MIL-STD-202, Method 208 e3 Polarity: Cathode Band Marking: Type Number Ordering Information: See Last Page Weight: 0.3 grams (approximate) Dim A B C D DO-41 Min 25.40 4.06 0.71 2.00 C D Max ¾ 5.21 0.864 2.72 All Dimensions in mm Maximum Ratings and Electrical Characteristics Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 5) RMS Reverse Voltage Average Rectified Output Current @ TA = 75°C (Note 1) Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage (Note 5) Reverse Recovery Time (Note 3) Typical Total Capacitance (Note 2) Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: 1. 2. 3. 4. 5. @ TA = 25°C unless otherwise specified Symbol VRRM VRWM VR VR(RMS) IO IFSM VFM IRM trr CT RqJA Tj, TSTG SF10 AG 50 35 SF10 BG 100 70 SF10 CG 150 105 SF10 DG 200 140 SF10 FG 300 210 SF10 GG 400 280 SF10 HG 500 350 SF10 JG 600 420 Unit V V A A 1.0 30 0.95 10 100 35 75 75 -65 to +150 40 50 50 1.3 1.5 @ IF = 1.0A @ TA = 25°C @ TA = 100°C V mA ns pF °C/W °C Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. (See Figure 5) RoHS revision13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7. Short duration pulse test used to minimize self-heating effect DS24012 Rev. 4 - 2 1 of 3 www.diodes.com SF10AG - SF10JG ã Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) 1.0 I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) 10 SF10AGSF10DG SF10FGSF10GG 0.8 0.6 1.0 0.4 0.1 SF10HGSF10JG 0.2 Single phase half-wave 60Hz resistive or inductive load Tj = 25 C o 0 25 0.01 125 150 175 200 50 75 100 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 TA, AMBIENT TEMPERATURE (° C) Fig. 1 Forward Current Derating Curve VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics IFSM, PEAK FORWARD SURGE CURRENT (A) 30 100 SF10AG - SF10GG CT, TOTAL CAPACITANCE (pF) SF10HG - SF10JG 20 10 10 Tj = 25° C f = 1.0MHz 0 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current 100 1 1 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance trr +0.5A 100 Device Under Test (-) Pulse Generator (Note 2) 0A -0.25A (+) 50V DC Approx (-) Oscilloscope (Note 1) (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS24012 Rev. 4 - 2 2 of 3 www.diodes.com SF10AG - SF10JG Ordering Information Device SF10AG-A SF10AG-B SF10AG-T SF10BG-A SF10BG-B SF10BG-T SF10CG-A SF10CG-B SF10CG-T SF10DG-A SF10DG-B SF10DG-T SF10FG-A SF10FG-B SF10FG-T SF10GG-A SF10GG-B SF10GG-T SF10HG-A SF10HG-B SF10HG-T SF10JG-A SF10JG-B SF10JG-T Notes: (Note 6) Packaging DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 Shipping 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 6. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS24012 Rev. 4 - 2 3 of 3 www.diodes.com SF10AG - SF10JG