ACI4420N

ACi4400 series GreenTech EC compact fans Ø 119 mm x 38 mm The engineer’s choice Design Highlights: • High efficiency EC motor with integrated electronics • AC-line operated, speed is frequency independent • Global voltage range version available (100-240V) • Encapsulated versions certified for use with flammable refrigerants Advantages vs Equivalent AC fan: • 75% less power consumption • Reduction in noise of 3dB or more • Extended service life • Constant performance over the full voltage range • Half the weight Standard Features: • Air exhaust over struts, CW rotation looking at impeller • Electrical connection via 2 flat pins, 2.8mm x 0.5mm (0.11" x .02") • Reinforced composite; impeller PA, housing PBT, non-conductive & non-flammable • Electronic locked rotor protection • Ball bearings; shielded & lubricated for life • Protection level IP20 Options: • Flying leads • Protection from humidity, splash water or salt fog • Protection level up to IP65 (jacketed cable standard) • Speed control and tach output Comparison to ebm-papst AC fans ACi4400HH IP20 protection (standard) - for indoor (clean/dry) applications where no additional protection for motor (electronics or windings) is required. 4606Z* 4656Z* Size (mm) 119x119x38 119x119x38 119x119x38 Voltage Range (VAC) 90-264 103.5-122 207-244 Nominal Speed (rpm) 3300 3100 2650 Flow @ 0"SP (CFM) 103 106 94 Power @ 0" SP (watts) 4.4 18 19 (°C) -40 to +75 -40 to +85 -40 to +75 Service Life L10 @ 40°C (hours) 65,000 40,000 37,500 Sound Pressure dB(A) 43 45 40 Sound Power Bel(A) 5.5 5.6 5.3 lbs 0.55 1.19 1.19 Ambient Temp Range Weight *Other ebm-papst AC fan models "U" version (optional) IP65 ingress protection rating with VDE certificate (full encapsulation of winding and PCB) 1. P/N 4606N & 4656N have the same free air flow and mounting but opposite airflow direction. 2. P/N 4606X & 4656X are the same as 4606N & 4656N but with 3.7mm (0.146") diameter mounting holes. Connection: with 2 flat pins 2.8 x 0.5 (not with IP65) optional flying leads Fully integrated converter and fan electronics. ACi4400 models are universally usable for all main voltages between 90 and 264 VAC. Compact design and lightweight. 275 g Highlights: ACi4400 series - Salt spray protection - Degree of protection: IP 65 - Compliance for use in systems with flammable refrigerant charge up to 150 g (1) Fiberglass-reinforced plastic -40...+75 65,000 / 25,000 110,000 1 25 4.1 1.7 1,850 -40...+75 65,000 / 25,000 110,000 2 39 5.2 3.8 3,000 -40...+75 65,000 / 25,000 110,000 3 90...264 43 5.5 4.4 3,300 -40...+75 65,000 / 25,000 110,000 4 90...264 43 5.5 4.5 3,300 -40...+75 65,000 / 25,000 110,000 8 50 / 60 90...264 43 5.5 4.5 3,300 -40...+75 65,000 / 25,000 110,000 8 230 50 / 60 195...265 25 4.1 1.7 1,850 -40...+75 65,000 / 25,000 110,000 5 86 230 50 / 60 195...265 36 4.9 2.8 2,700 -40...+75 65,000 / 25,000 110,000 6 94 230 50 / 60 195...265 39 5.1 3.2 3,000 -40...+75 65,000 / 25,000 110,000 7 175 103 230 50 / 60 195...265 43 5.5 4.4 3,300 -40...+75 65,000 / 25,000 110,000 8 ACi4410HH 175 103 115 50 / 60 85...132 43 5.5 4.4 3,300 -40...+75 65,000 / 25,000 110,000 8 Subject to change * analog (5-10 VDC) speed control input, IP 65 VAC Hz VAC dB(A) Bel(A) 78 46 100...240 50 / 60 90...264 23 ACi4400MLR*** 100 59 100...240 50 / 60 90...264 ACi4400H 160 94 100...240 50 / 60 90...264 ACi4400HH 175 103 100...240 50 / 60 ACi4400HHAU* 175 103 100...240 50 / 60 ACi4400/2HHP** 175 103 100...240 ACi4420ML 100 59 ACi4420N 147 ACi4420H 160 ACi4420HH ACi4400L ** PWM speed control input and 2ppr, open collector tach output Curve Temperature range 1,500 cfm Type Life ecpectancy L10IPC (40 °C) Nominal speed 1.1 m3/h Nominal Data Service life L10 (Tmax) ebm-papst standard Power consumption 3.7 Sound power level Hours Sound pressure level Hours Voltage range °C Frequency rpm-1 Nominal voltage Watts Air flow / Air flow Sintec sleeve bearings Ball bearings Weight: Service life L10 (40 °C) ebm-papst standard GreenTech EC compact fans Ø 119 mm x 38 mm *** moisture protection Air performance measured according to: ISO 5801. Installation category A, without contact protection. Noise: Total sound power level LWA ISO 10302 measured on a hemisphere with a radius of 2 m. Sound pressure level LpA measured at 1 m distance from fan axis. The values given are applicable only under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard configuration, the parameters must be checked after installation! For detailed information see http://www.ebmpapst.com/ general conditions 5 6 7 8 Rotor protrusion max. 0.6 mm. C Saftey compliance: US CSA International File LR27697 UL File GPWV2.E38324 Certificate #2335559 Fan Recognized per UL507 CSA STD C22.2 No, 113-12 Converter Recognized per UL508C Label marking Motor Recognized per UL 1004-7 100 Hyde Road, Farmington, CT 06034 USA | www.ebmpapst.us Tel: 860 674 1515 | Fax: 860 674 8536 | sales@us.ebmpapst.com ©ebm-papst Inc. 2017. ebm-papst Inc. reserves the right to change any specifications or data without notice. 10/17