FBR4

FB FBR HIGH VOLTAGE, HIGH CURENT, STANDARD & FAST RECOVERY, SILICON RECTIFIER DIODES U p to 250 nanosec. max recovery Exceptionally low leakage Avalanche characteristics EDI T YPE # FB4 FB5 FBR3 FBR3.5 FBR4 PRV VOLTS 4,000 5,000 3,000 3,500 4,000 REVERSE RECOVERY TIME Not Applicable Not Applicable 250 Nanoseconds Max 250 Nanoseconds Max 250 Nanoseconds Max Electrical Characteristics (at TA = 25°C Unless Otherwise Specified) ELECTRICAL CHARACTERISTIC AVERAGE FORWA RD CURRENT, I O (With Proper Heat sink) AVERAGE FORWA RD CURRENT, I O (Circuit Board Mounted) MAX FORWARD VOLTAGE DROP (@ 20 Amps), MAX SURGE CURRENT (1/2 CYCLE, 60 Hz) MAX DC REVERSE CURRENT (25ºC) OPERATING TEMPERATURE RANGE STORAGE TEMPERATURE RANGE FB Series FBR Series 4.0 A 3.0 A 2.0 A 1.5 A 5.0 V 6.5 V 800 A 800 A 5.0 ìA 5.0 ìA -55 To 150ºC -55 To 150ºC NOTES: It is recommended that a proper heat sink be used on the terminals of this device between the body and the soldering point to prevent damage from excess heat. EDI reserves the right to change these specifications at any time without notice. ELECTRONIC DEVICES, INC. DESIGNERS AND MANUFACTURERS OF SOLID STATE DEVICES SINCE 1951. 21 GRAY OAKS AVENUE * YONKERS. NEW YORK 10710 914-965-4400 * FAX 914-965-5531 * 1-800-678-0828 E E-mail:sales@edidiodes.com * website: http://www.edidiodes.com W F B FBR NOTE: Maximum lead and terminal temperature for soldering: 1/4 inch from case, for 5 seconds at 250°C TEST CIRCUIT EDI reserves the right to change these specifications at any time without notice. ELECTRONIC DEVICES, INC. DESIGNERS AND MANUFACTURERS OF SOLID STATE DEVICES SINCE 1951. 21 GRAY OAKS AVENUE * YONKERS. NEW YORK 10710 914-965-4400 * FAX 914-965-5531 * 1-800-678-0828 E E-mail:sales@edidiodes.com * website: http://www.edidiodes.com W