SBL1040

Certificate TH97/10561QM Certificate TW00/17276EM SBL1030 ~ SBL1040 PRV : 30 ~ 40 Volts Io : 10 Amperes FEATURES : * Plastic package has Underwriters Laboratory Flammability Classifications 94V-0 * Dual rectifier construction, positive center tap * Metal silicon junction, majority carrier conduction * Low power loss, high efficiency * Guardring for overvoltage protection * For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications * High temperature soldering : 250°C/10 seconds, 0.25" (6.35mm) from case * Pb / RoHS Free SCHOTTKY BARRIER RECTIFIER DIODES TO-220AC 0.154(3.91)DIA. 0.415(10.54)MAX. 0.148(3.74) 0.113(2.87) 0.103(2.62) 0.055(1.39) 0.045(1.14) 0.185(4.70) 0.175(4.44) 0.145(3.68) 0.135(3.43) 0.350(8.89) 0.330(8.39) 1 2 0.160(4.06) 0.140(3.56) 0.635(16.13) 0.625(15.87) 0.603(15.32) 0.573(14.55) PIN 1 CASE PIN 2 0.205(520) 0.195(4.95) 0.560(14.22) 0.530(13.46) 0.037(0.94) 0.027(0.68) 0.022(0.56) 0.014(0.36) MECHANICAL DATA : * Case : JEDEC TO-220AC molded plastic body * Terminals: Plated leads, solderable per MIL-STD-750 Method 2026 * Polarity: As marked * Mounting Position: Any * Weight : 2.24 grams (Approximately) Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS Maximum Repetitive Peak Reverse Voltage Maximum Working Peak Reverse Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Tc = 110 °C Peak Forward Surg Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at 10 A (Note 1) Maximum Average Reverse Current at Rate Peak Reverse Voltage (Note 1) T C = 25 °C T C = 100 °C ( Tc = 25 °C unless otherwise noted) SYMBOL VRRM VRWM VDC IF(AV) IFSM VF IR RθJC TJ, TSTG SBL1030 30 30 30 10 250 0.6 1.0 50 2.0 -40 to + 125 SBL1040 40 40 40 UNIT V V V A A V mA °C/W °C Typical Thermal Resistance (Junction to Case) Per Leg Operating Junction and Storage Temperature Range Note : (1) Pulse test : 300 µs pluse width, 1% duty cycle Page 1 of 2 Rev. 01 : March 6, 2006 Certificate TH97/10561QM Certificate TW00/17276EM RATING AND CHARACTERISTIC CURVES ( SBL1030 ~ SBL1040 ) FIG.1 - FORWARD CURRENT DERATING CURVE 10 FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 250 8 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 200 6 150 4 100 2 Resistive or Inductive Load 0 0 25 50 75 100 125 150 50 TJ =TJmax 8.3 ms single half sine-wave (JEDEC Method) 1 2 4 6 10 20 40 60 100 0 CASE TEMPERATURE, (°C) NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS 10 TJ = 125 °C TJ = 125 °C 10 INSTANTANEOUS FORWARD CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (mA) 1.0 TJ = 75 °C 1.0 TJ = 25 °C 0.1 0.1 0.01 TJ = 25 °C Pulse Width = 300 μs 1% Duty Cycle 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 0.001 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, (V) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) Page 1 of 2 Rev. 01 : March 6, 2006