PTH05060YAZT

3.3/5/12 Vin Single Output DC-DC CONVERTERS • • • • • • • • • • • Non-isolated DDR/QDR Memory Bus Termination Module NEW Product 1 VTT bus termination output (output the system VREF) 10 A output current 3.3 Vdc, 5 Vdc or 12 Vdc input voltage DDR and QDR compatible ON/OFF inhibit (for VTT standby) Under-voltage lockout Operating temperature range: -40 ºC to +85 ºC Efficiencies up to 91% Output overcurrent protection (non-latching, auto-reset) Point-of-Load-Alliance (POLA) compatible Available RoHS compliant PTHxx060Y The PTHxx060Y are a new series of non-isolated dc-dc converters designed specifically for bus termination in DDR and QDR memory applications. Operating from either a 3.3 Vdc, 5 Vdc or 12 Vdc input, the modules generate a VTT output that will source or sink up to 10 A of current to accurately track their VREF input. VTT is the required bus termination supply voltage, and VREF is the reference voltage for the memory and chipset bus receiver comparators. VREF is usually set to half the VDDQ power supply voltage. The PTHxx060Y series employs an actively switched synchronous rectifier output to provide state of the art stepdown switching conversion. The products are small in size and are an ideal choice where space, performance and high efficiency are desired. All specifications are typical at nominal input, VREF = 1.25 V, full load at 25 °C unless otherwise stated. Cin, Co1 and Co2 = typical value OUTPUT SPECIFICATIONS Output current (See Note 1) Tracking range for VREF Tracking tolerance to VREF (VTT - VREF) (over line, load and temperature) Ripple and noise Load transient response (See Note 4) Output capacitance: Non-ceramic values (See Notes 4 and 5) Ceramic values (See Note 4) (See Note 6) INPUT SPECIFICATIONS Input current Input voltage range No load PTH03060Y PTH05060Y PTH12060Y 10 mA 2.95-3.65 Vdc 4.5-5.5 Vdc 10.8-13.2 Vdc ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 2) MSL (‘Z’ suffix only) PROTECTION Overcurrent threshold (auto reset) All models Operating ambient, temperature Non-operating 20 MHz bandwidth (over ∆VREF range) ±10 A 0.55-1.8 V -10 mV to +10 mV INPUT SPECIFICATIONS CONTD. Input capacitance (See Note 3) Remote ON/OFF GENERAL SPECIFICATIONS Efficiency (Io = 8 A) 20 mV pk-pk Insulation voltage Switching frequency PTH03060Y PTH05060Y PTH12060Y PTH03060Y PTH05060Y PTH12060Y 2 YEAR WARRANTY SPECIFICATIONS PTH03060Y and PTH05060Y PTH12060Y 330 µF 560 µF Positive logic 86% typ. 86% typ. 83% typ. Non-isolated 550-650 kHz 550-650 kHz 200-300 kHz EN60950 UL/cUL60950 UL94V-0 30 µs settling time Overshoot/undershoot 25 mV typ. PTH03060Y 470 µF typ., 5,500 µF max. PTH05060Y 470 µF typ., 5,500 µF max. PTH12060Y 940 µF typ., 5,500 µF max. PTH03060Y 200 µF typ., 300 µF max. PTH05060Y 200 µF typ., 300 µF max. PTH12060Y 400 µF typ., 600 µF max. ESR (non-ceramic) 4 mΩ min Approvals and standards Material flammability Dimensions Weight MTBF Telcordia SR-332 (L x W x H) 25.27 x 15.75 x 9.00 mm 0.995 x 0.620 x 0.354 in 3.7 g (0.13 oz) 6,000,000 hours -40 ºC to +85 ºC -40 ºC to +125 ºC Level 3 Undervoltage lockout: PTH03060Y PTH05060Y PTH12060Y Vin increasing 2.45 V typ., 2.80 V max. Vin decreasing 2.20 V min., 2.40 V typ. Vin Vin Vin Vin increasing 4.30 V typ., 4.45 V max. decreasing 3.40 V min., 3.70 V typ. increasing 9.5 V typ., 10.4 V max. decreasing 8.80 V min., 9.0 V typ. JEDEC J-STD-020C 20 A typ. File Name: pthxx060y.pdf Rev (02): 19 Dec 2005 3.3/5/12 Vin Single Output DC-DC CONVERTERS Non-isolated DDR/QDR Memory Bus Termination Module NEW Product 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT POWER (MAX.) 18 W 18 W 18 W OUTPUT CURRENT (MIN.) 0A 0A 0A OUTPUT CURRENT (MAX.) ±10 A ±10 A ±10 A PTHxx060Y VTT RANGE 0.55-1.8 Vdc 0.55-1.8 Vdc 0.55-1.8 Vdc INPUT VOLTAGE 2.95-3.65 Vdc 4.50-5.50 Vdc 10.8-13.2 Vdc EFFICIENCY (TYP.) 86% 86% 83% MODEL NUMBER (8,9) PTH03060Y PTH05060Y PTH12060Y Part Number System with Options PTH05060YAST Packaging Options No Suffix = Trays T = Tape and Reel (7) Mounting Option (8) D = Horizontal Through-Hole (Matte Sn) H = Horizontal Through-Hole (Sn/Pb) S = Surface-Mount (63/37 Sn/Pb pin solder material) Z = Surface-Mount (96.5/3.0/0.5 Sn/Ag/Cu pin solder material) Pin Option A = Through-Hole Std. Pin Length (0.140”) A = Surface-Mount Tin/Lead Solder Ball Output Voltage Code Y = DDR Module Product Family Point of Load Alliance Compatible Input Voltage 03 = 3.3 V, 05 = 5 V and 12 = 12 V Output Current 06 = 10 A Mechanical Package Always 0 Notes 1 Rating is conditional on the module being soldered to a 4 layer PCB with 1 oz. copper. See the SOA curves or contact the factory for appropriate derating. This control pin has an internal pull-up to the input voltage Vin. If it is left open-circuit the module will operate when input power is applied. A small low-leakage (