B32021

Film Capacitors EMI Suppression Capacitors (MKP) Series/Type: Date: B32021 ... B32026 May 2009 © EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EMI suppression capacitors (MKP) Y2 / 300 V AC B32021 ... B32026 Typical applications Y2 class for interference suppression "Line to ground" applications. Climatic Max. operating temperature: 110 °C Climatic category (IEC 60068-1): 40/110/56 Construction Dielectric: polypropylene (MKP) Plastic case (UL 94 V-0) Epoxy resin sealing (UL 94 V-0) Dimensional drawing Dimensions in mm Features Very small dimensions Good self-healing properties High voltage capability Terminals Parallel wire leads, lead-free tinned Standard lead lengths: 6 1 mm Special lead lengths available on request Marking Manufacturer's logo, lot number, date code, rated capacitance (coded), capacitance tolerance (code letter), rated AC voltage (IEC), series number, sub-class (Y2), dielectric code (MKP), climatic category, passive flammability category, approvals. Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For taping details, refer to chapter "Taping and packing" Lead spacing Lead ±0.4 diameter d1 10 15 ... 27.5 37.5 0.6 0.8 1.0 Type B32021 B32022 ... B32024 B32026 Marking example Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 18 B32021 ... B32026 Y2 / 300 V AC Approvals Approval marks Standards EN 60384-14 / IEC 60384-14 (300 V AC) UL1414 (250 V AC), UL1283 (400 V AC) CSA C22.2 No. 1 (250 V AC) CSA C22.2 No. 8 (400 V AC) Certificate 40018909 E97863, E301966 E97863 E301966 1) 1) approved by UL Overview of available types Lead spacing 10 mm Type CR (µF) 0.0010 0.0015 0.0022 0.0033 0.0047 0.0056 0.0068 0.0082 0.010 0.015 0.022 0.033 0.047 0.056 0.068 0.082 0.10 0.15 0.22 0.33 0.39 0.47 0.56 0.68 0.82 1.0 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 18 15 mm B32022 22.5 mm B32023 27.5 mm B32024 37.5 mm B32026 B32021 B32021 ... B32026 Y2 / 300 V AC Ordering codes and packing units Lead spacing CR mm 10 µF 0.0010 0.0015 0.0022 0.0033 0.0047 0.0056 0.0068 0.0082 0.010 0.010 0.015 0.022 0.022 0.033 0.047 0.047 0.056 0.068 0.082 Max. dimensions w×h×l mm 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 6.0 × 12.0 × 13.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 6.0 × 12.0 × 18.0 7.0 × 12.5 × 18.0 8.0 × 14.0 × 18.0 8.5 × 14.5 × 18.0 9.0 × 17.5 × 18.0 9.0 × 17.5 × 18.0 9.0 × 17.5 × 18.0 11.0 × 18.5 × 18.0 Ordering code (composition see below) B32021A3102+*** B32021A3152+*** B32021A3222+*** B32021A3332+*** B32021A3472+*** B32021A3562+*** B32021A3682+*** B32021A3822+*** B32021A3103M*** B32022A3103+*** B32022A3153+*** B32022A3223M*** B32022B3223+*** B32022A3333+*** B32022A3473M*** B32022B3473+*** B32022A3563+*** B32022A3683M*** B32022A3823M*** Ammo pack pcs./MOQ 4000 4000 4000 4000 3320 3320 3320 2720 2720 4680 3840 3840 3320 2920 2720 2560 2560 2560 Reel pcs./MOQ 6800 6800 6800 6800 5200 5200 5200 4400 4400 5200 4400 4400 3600 3000 2800 2800 2800 2800 2200 Untaped pcs./MOQ 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 2000 2000 2000 2000 2000 1200 15 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 18 B32021 ... B32026 Y2 / 300 V AC Ordering codes and packing units Lead spacing CR mm 22.5 µF 0.047 0.056 0.068 0.068 0.082 0.10 0.10 0.15 0.15 0.22 0.22 0.33 0.39 0.15 0.22 0.22 0.33 0.33 0.47 0.47 0.47 0.56 0.68 0.68 0.68 0.82 1.0 Max. dimensions w×h×l mm 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 7.0 × 16.0 × 26.5 7.5 × 14.5 × 26.5 8.5 × 16.5 × 26.5 8.5 × 16.5 × 26.5 10.5 × 16.5 × 26.5 10.5 × 18.5 × 26.5 10.5 × 20.5 × 26.5 12.0 × 22.0 × 26.5 14.5 × 29.5 × 26.5 14.5 × 29.5 × 26.5 14.5 × 29.5 × 26.5 11.0 × 19.0 × 31.5 11.0 × 19.0 × 31.5 11.0 × 21.0 × 31.5 13.5 × 23.0 × 31.5 14.0 × 24.5 × 31.5 15.0 × 24.5 × 31.5 16.0 × 32.0 × 31.5 18.0 × 27.5 × 31.5 16.0 × 32.0 × 31.5 18.0 × 33.0 × 31.5 19.0 × 30.0 × 31.5 21.0 × 31.0 × 31.5 22.0 × 36.5 × 31.5 22.0 × 36.5 × 31.5 Ordering code (composition see below) B32023A3473+*** B32023A3563M*** B32023A3683+*** B32023B3683M*** B32023A3823+*** B32023A3104M*** B32023B3104+*** B32023A3154M*** B32023B3154+*** B32023A3224M*** B32023B3224+*** B32023A3334+*** B32023A3394M*** B32024A3154+*** B32024A3224M*** B32024B3224+*** B32024A3334M*** B32024B3334+*** B32024A3474M*** B32024C3474+*** B32024B3474+*** B32024A3564+*** B32024B3684+*** B32024A3684M*** B32024C3684+*** B32024A3824+*** B32024A3105M*** Ammo pack pcs./MOQ 2720 2720 2320 2200 1920 1920 1560 1560 Reel pcs./MOQ 2800 2800 2400 2000 2000 2000 1600 1600 Untaped pcs./MOQ 2880 2880 2520 2280 2040 2040 2160 2160 2160 1800 2160 2160 2160 1280 1280 1280 1040 1040 960 880 800 880 800 720 720 640 640 27.5 1400 1400 1400 1000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 18 B32021 ... B32026 Y2 / 300 V AC Ordering codes and packing units Lead spacing CR mm 37.5 µF 0.33 0.47 0.56 0.56 0.68 0.82 0.82 1.0 1.0 Max. dimensions w×h×l mm 12.0 × 22.0 × 41.5 14.0 × 25.0 × 41.5 14.0 × 25.0 × 41.5 16.0 × 28.5 × 41.5 16.0 × 28.5 × 41.5 16.0 × 28.5 × 41.5 18.0 × 32.5 × 41.5 18.0 × 32.5 × 41.5 20.0 × 39.5 × 41.5 Ordering code Ammo Reel (composition see pack below) pcs./MOQ pcs./MOQ B32026A3334+*** B32026A3474+*** B32026A3564M*** B32026B3564+*** B32026A3684+*** B32026A3824M*** B32026B3824+*** B32026A3105M*** B32026B3105+*** Untaped pcs./MOQ 1620 1380 1380 800 800 800 720 720 640 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 18 B32021 ... B32026 Y2 / 300 V AC Technical data Rated AC voltage ( IEC 60384-14 ) Maximum continuous DC voltage VDC Maximum continuous AC voltage VAC Max. operating temperature Top,max DC test voltage Dissipation factor tan δ (in 10-3) at 20 °C (upper limit values) Insulation resistance Rins or time constant τ = CR Rins at 100 V DC, 20 °C, rel. humidity ≤ 65% and for 60 s (minimum as-delivered values) Passive flammability category to IEC 40 (CO) 752 Capacitance tolerances (measured at 1 kHz) Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt and k0 values Lead spacing dV/dt in V/µs k0 in V2/µs 10 mm 800 677 000 15 mm 600 508 000 22.5 mm 500 423 000 27.5 mm 400 338 000 37.5 mm 300 254 000 300 V (50/60 Hz) 1500 V 480 V (50/60 Hz) +110 °C 4000 V (C ≤ 0.33 µF), 3700 V (C > 0.33 µF), 2 s CR ≤ 0.33 µF at 1 kHz 1 30 000 s CR ≤ 0.33 µF 100 000 MΩ CR > 0.33 µF 1 CR > 0.33 µF B ±10% (K), ±20% (M) Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 18 B32021 ... B32026 Y2 / 300 V AC Mounting guidelines 1 1.1 Soldering Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature Soldering time Immersion depth Evaluation criteria: Visual inspection 1.2 235 ±5 °C 2.0 ±0.5 s 2.0 +0/ 0.5 mm from capacitor body or seating plane Wetting of wire surface by new solder ≥90%, free-flowing solder Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: Series Solder bath temperature Soldering time 10 ±1 s MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing > 10 mm) MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤ 7.5 mm) MKT uncoated (lead spacing ≤ 10 mm) insulated (B32559) 5 ±1 s