B32559C3223

Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: Date: B32559C May 2009 © EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Metallized polyester film capacitors (MKT) Compact design (stacked) B32559C Typical applications Energy saving lamps Climatic Max. operating temperature: 125 °C Climatic category (IEC 60068-1): 55/125/56 Construction Dielectric: polyethylene terephthalate (polyester, PET) Stacked-film technology Heat shrinkable tube standard types B32559C*: polyester 100 µm, 125 °C Features Very small dimensions Self-healing properties High pulse strength Terminals Lead spacing 5.0 mm Crimped wire leads, lead-free tinned, lead length (6 1) mm Straight wire leads, lead-free tinned, lead length (6 1) mm Special lead length available on request Marking Manufacturer's logo, rated capacitance (coded), capacitance tolerance (code letter), rated AC voltage, date of manufacture (coded) Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to chapter "Taping and packing". Detail specifications Homologated to IEC 60384-2 Dimensional drawing Dimensions in mm Lead spacing ±0.4 5.0 Lead diameter d1 0.5 Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 23 B32559C Compact design (stacked) Overview of available types Lead spacing 5.0 mm Type B32559C Lead straight / crimped configuration Page VR (V DC) VRMS (V AC) CR (µF) 0.0010 0.0015 0.0022 0.0027 0.0033 0.0047 0.0068 0.0082 0.010 0.012 0.015 0.022 0.027 0.033 0.047 0.056 0.068 0.10 0.12 0.15 0.22 0.33 0.47 0.68 1.0 4 63 40 100 63 250 160 400 200 630 400 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 23 B32559C Compact design (stacked) Ordering codes and packing units VR VRMS CR f ≤60 Hz V DC V AC µF 63 40 0.22 0.33 0.47 0.68 1.0 100 63 0.033 0.047 0.056 0.068 0.10 0.12 0.15 0.22 0.33 0.47 250 160 0.022 0.027 0.033 0.047 0.056 0.068 0.10 0.12 0.15 Max. dimensions w×h×l mm 3.0 × 6.5 × 7.0 3.0 × 6.5 × 7.0 3.5 × 7.0 × 7.0 3.5 × 8.5 × 7.0 4.0 × 10.5 × 7.0 3.0 × 6.5 × 7.0 3.0 × 6.5 × 7.0 3.0 × 7.0 × 7.0 3.0 × 7.0 × 7.0 3.0 × 7.0 × 7.0 3.0 × 7.0 × 7.0 3.0 × 7.0 × 7.0 3.5 × 8.5 × 7.0 3.5 × 8.5 × 7.0 3.5 × 9.0 × 7.0 3.0 × 7.0 × 7.0 3.0 × 7.0 × 7.0 3.0 × 7.0 × 7.0 3.0 × 7.0 × 7.0 3.0 × 7.0 × 7.0 3.5 × 7.0 × 7.0 3.5 × 9.0 × 7.0 4.5 × 9.0 × 7.0 4.5 × 10.0 × 7.0 Ordering code (composition see below) B32559C0224+*** B32559C0334+*** B32559C0474+*** B32559C0684+*** B32559C0105+*** B32559C1333+*** B32559C1473+*** B32559C1563+*** B32559C1683+*** B32559C1104+*** B32559C1124+*** B32559C1154+*** B32559C1224+*** B32559C1334+*** B32559C1474+*** B32559C3223+*** B32559C3273+*** B32559C3333+*** B32559C3473+*** B32559C3563+*** B32559C3683+*** B32559C3104+*** B32559C3124+*** B32559C3154+*** Ammo pack pcs./MOQ 11200 12000 12000 9200 9200 12000 12800 12000 12800 12800 12800 12800 11600 11600 10000 12800 12800 12000 12800 10800 10800 12000 7200 7200 Reel pcs./MOQ 9600 10400 10400 7600 7600 10400 11200 10400 11200 11200 11200 11200 10000 10000 8400 11200 11200 10400 11200 9200 9200 10400 5800 5600 Untaped pcs./MOQ 10000 10000 10000 8000 8000 12000 12000 12000 12000 12000 12000 12000 12000 12000 10000 12000 12000 12000 12000 1000 1000 8000 8000 8000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% *** = Packaging code: 489 = Ammo pack straight 389 = Reel straight 289 = Ammo pack crimped 189 = Reel crimped 000 = Untaped crimped (lead length 6 001 = Untaped (lead length 6 1 mm) 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 23 B32559C Compact design (stacked) Ordering codes and packing units VR VRMS CR f ≤60 Hz V DC V AC µF 400 200 0.0068 0.0082 0.010 0.012 0.015 0.022 0.027 0.033 0.047 0.056 0.068 0.10 0.12 630 400 0.0010 0.0015 0.0022 0.0027 0.0033 0.0047 0.0068 0.0082 0.010 Max. dimensions w×h×l mm 3.0 × 7.0 × 7.0 3.0 × 7.0 × 7.0 3.0 × 7.5 × 7.0 3.0 × 7.5 × 7.0 3.0 × 7.5 × 7.0 3.0 × 8.0 × 7.0 3.0 × 8.0 × 7.0 3.5 × 8.0 × 7.0 3.5 × 9.5 × 7.0 4.0 × 10.0 × 7.0 5.0 × 10.0 × 7.0 5.5 × 12.5 × 7.0 5.5 × 13.0 × 7.0 3.0 × 7.0 × 7.0 3.0 × 7.0 × 7.0 3.0 × 8.0 × 7.0 3.0 × 8.0 × 7.0 3.5 × 8.0 × 7.0 3.5 × 8.0 × 7.0 3.5 × 10.5 × 7.0 3.5 × 10.5 × 7.0 4.0 × 10.5 × 7.0 Ordering code (composition see below) B32559C6682+*** B32559C6822+*** B32559C6103+*** B32559C6123+*** B32559C6153+*** B32559C6223+*** B32559C6273+*** B32559C6333+*** B32559C6473+*** B32559C6563+*** B32559C6683+*** B32559C6104+*** B32559C6124+*** B32559C8102+*** B32559C8152+*** B32559C8222+*** B32559C8272+*** B32559C8332+*** B32559C8472+*** B32559C8682+*** B32559C8822+*** B32559C8103+*** Ammo pack pcs./MOQ 12800 12800 12800 12000 11200 12800 10800 9200 9200 8000 7200 6000 6000 12800 12800 12800 12800 10000 12000 12000 12000 9200 Reel pcs./MOQ 11200 11200 11200 10400 9600 11200 9200 7600 7600 6400 5600 4400 4400 11200 11200 11200 11200 8400 10400 10400 10400 7600 Untaped pcs./MOQ 12000 12000 12000 12000 12000 12000 11200 10000 8000 6000 7200 7200 4800 12000 12000 12000 12000 8000 8000 8000 8000 8800 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% *** = Packaging code: 489 = Ammo pack straight 389 = Reel straight 289 = Ammo pack crimped 189 = Reel crimped 000 = Untaped crimped (lead length 6 001 = Untaped (lead length 6 1 mm) 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 23 B32559C Compact design (stacked) Technical data Max. operating temperature Top,max +125 °C Upper category temperature Tmax +125 °C Lower category temperature Tmin 55 °C Rated temperature TR +85 °C Dissipation factor tan δ (in 10-3) at CR ≤ 0.1 µF 0.1 µF < CR ≤ 1 µF at 20 °C 1 kHz 8 10 (upper limit values) 10 kHz 15 20 100 kHz 30 VR CR ≤ 0.33 µF CR > 0.33 µF Insulation resistance Rins or time constant τ = CR Rins ≤ 100 V DC 3750 MΩ 1250 s at 20 °C, rel. humidity ≤ 65% ≥ 250 V DC 7500 MΩ 2500 s (minimum as-delivered values) DC test voltage 1.4 VR, 2 s TA (°C) DC voltage derating AC voltage derating Category voltage VC (continuous operation with VDC TA ≤ 85 VC = VR VC,RMS = VRMS or VAC at f ≤ 60 Hz) 85 2 upper limit value Insulation resistance Rins < 150 MΩ (CR ≤ 0.33 µF) or time constant τ = CR Rins < 50 s (CR > 0.33 µF) Soldering conditions Maximum solder bath temperature 260 °C Maximum soldering time 4s Operating temperature range Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 23 B32559C Compact design (stacked) Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt and k0 values VR (V DC) 63 100 250 400 630 VRMS (V AC) 40 63 160 200 400 dV/dt in V/µs 250 300 400 600 800 k0 in V2/µs 30 000 60 000 200 000 500 000 1 000 000 Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 23 B32559C Compact design (stacked) Impedance Z versus frequency f (typical values) Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 23 B32559C Compact design (stacked) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 5 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 23 B32559C Compact design (stacked) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 5 mm 630 V DC/400 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 23 B32559C Compact design (stacked) Permissible AC current IRMS versus frequency f Lead spacing 5 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 23 B32559C Compact design (stacked) Permissible AC current IRMS versus frequency f Lead spacing 5 mm 630 V DC/400 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 23 B32559C Compact design (stacked) Mounting guidelines 1 1.1 Soldering Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature Soldering time Immersion depth Evaluation criteria: Visual inspection 1.2 235 ±5 °C 2.0 ±0.5 s 2.0 +0/ 0.5 mm from capacitor body or seating plane Wetting of wire surface by new solder ≥90%, free-flowing solder Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: Series Solder bath temperature Soldering time 10 ±1 s MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing > 10 mm) MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤ 7.5 mm) MKT uncoated (lead spacing ≤ 10 mm) insulated (B32559) 5 ±1 s