B32562H6105

Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: Date: B32560 ... B32564 May 2009 © EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Metallized polyester film capacitors (MKT) General purpose (stacked) SilverCapTM B32560 ... B32564 Typical applications SMPS, converter Electronic ballasts Compact fluorescent lamps (CFL) Ignition Climatic Max. operating temperature: 125 °C Climatic category (IEC 60068-1): 55/125/56 Features Special dimensions available on request High pulse strength Small dimensions Construction Dielectric: polyethylene terephthalate (polyester, PET) Stacked-film technology Uncoated Terminals Parallel wire leads, lead-free tinned Special lead lengths available on request Marking Rated capacitance (coded), rated DC voltage Dimensional drawing Dimensions in mm Lead spacing ±0.4 7.5 10.0 15.0 22.5 27.5 Lead diameter d1 0.5 0.5 0.6 0.8 0.8 0.8 Type B32560 B32561 B32562J B32562H B32563 B32564 Delivery mode Bulk (untaped) Taped (Ammo pack or reel) for lead spacing ≤15.0 mm. For notes on taping, refer to chapter "Taping and packing“. Notes on mounting When mounting these capacitors, take into account creepage distances and clearances to adjacent live parts. The insulating strength of the cut surfaces to other live parts of the circuit is 1.5 times the capacitors rated DC voltage, but is always at least 300 V DC. Capacitors with 7.5 mm lead spacing are only suitable for use with single-clad printed circuit boards. Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 32 B32560 ... B32564 General purpose (stacked) SilverCapTM Overview of available types Lead spacing 7.5 mm Type Page VR (V DC) VRMS (V AC) CR (µF) 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 B32560 5 63 40 63 10.0 mm B32561 7 100 250 400 630 1000 63 160 200 400 500 40 63 15.0 mm B32562 9 100 250 400 630 100 250 400 630 160 200 350 63 160 200 350 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 32 B32560 ... B32564 General purpose (stacked) SilverCapTM Overview of available types Lead spacing 22.5 mm Type Page VR (V DC) VRMS (V AC) CR (µF) 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 B32563 10 100 63 250 160 400 200 27.5 mm B32564 11 100 63 250 160 400 200 420 200 Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 32 B32560 General purpose (stacked) SilverCapTM Ordering codes and packing units (lead spacing 7.5 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 63 40 1.0 1.5 2.2 3.3 4.7 100 63 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 250 160 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 Max. dimensions w×h×l mm 4.0 × 6.8 × 9.0 5.1 × 7.6 × 9.0 6.5 × 8.2 × 9.0 8.5 × 9.1 × 9.0 9.8 × 11.0 × 9.0 2.5 × 5.1 × 9.0 2.7 × 5.7 × 9.0 3.4 × 6.1 × 9.0 4.2 × 6.5 × 9.0 5.5 × 7.0 × 9.0 6.7 × 8.2 × 9.0 8.5 × 9.2 × 9.0 9.5 × 11.0 × 9.0 2.5 × 5.2 × 9.0 2.6 × 5.7 × 9.0 3.2 × 6.1 × 9.0 3.9 × 7.0 × 9.0 4.9 × 7.5 × 9.0 6.4 × 8.2 × 9.0 7.4 × 9.8 × 9.0 9.5 × 11.0 × 9.0 Ordering code (composition see below) B32560J0105+*** B32560J0155+*** B32560J0225+*** B32560J0335+000 B32560J0475+000 B32560J1224+*** B32560J1334+*** B32560J1474+*** B32560J1684+*** B32560J1105+*** B32560J1155+*** B32560J1225+000 B32560J1335+000 B32560J3473+*** B32560J3683+*** B32560J3104+*** B32560J3154+*** B32560J3224+*** B32560J3334+*** B32560J3474+000 B32560J3684+000 Ammo Reel pack pcs./ pcs./MOQ MOQ 8800 7200 6800 5600 6000 4800 Untaped pcs./ MOQ 4000 2000 2000 1400 1000 7600 6000 4800 3600 2000 1600 1200 800 7600 6800 4800 3600 2600 1800 1200 800 12400 12000 9600 8000 6000 5000 10000 9600 8000 6400 4800 4000 13000 12400 12400 8200 6800 5200 10400 10000 8000 6800 5200 4400 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Special dimensions available on request. For corresponding design rules, refer to chapter "General technical information", page . Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 5 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 32 B32560 General purpose (stacked) SilverCapTM Ordering codes and packing units (lead spacing 7.5 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 400 200 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 630 400 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 1000 500 0.0022 0.0033 0.0047 Max. dimensions w×h×l mm 2.5 × 5.5 × 9.0 2.5 × 5.5 × 9.0 2.5 × 5.5 × 9.0 2.5 × 5.5 × 9.0 2.5 × 5.5 × 9.0 2.5 × 5.5 × 9.0 2.5 × 5.5 × 9.0 2.5 × 5.5 × 9.0 2.5 × 5.5 × 9.0 2.6 × 6.0 × 9.0 3.2 × 6.5 × 9.0 3.8 × 7.3 × 9.0 4.9 × 7.7 × 9.0 6.5 × 8.2 × 9.0 7.7 × 9.8 × 9.0 2.5 × 5.5 × 9.0 2.5 × 5.5 × 9.0 2.5 × 5.5 × 9.0 2.5 × 5.5 × 9.0 2.5 × 5.5 × 9.0 3.2 × 6.5 × 9.0 3.8 × 7.5 × 9.0 4.6 × 8.3 × 9.0 5.7 × 8.6 × 9.0 2.5 × 6.0 × 9.0 3.3 × 6.5 × 9.0 3.6 × 7.4 × 9.0 Ordering code (composition see below) B32560J6102+*** B32560J6152+*** B32560J6222+*** B32560J6332+*** B32560J6472+*** B32560J6682+*** B32560J6103+*** B32560J6153+*** B32560J6223+*** B32560J6333+*** B32560J6473+*** B32560J6683+*** B32560J6104+*** B32560J6154+*** B32560J6224+000 B32560J8102+*** B32560J8152+*** B32560J8222+*** B32560J8332+*** B32560J8472+*** B32560J8682+*** B32560J8103+*** B32560J8153+000 B32560J8223+000 B32560J9222+*** B32560J9332+*** B32560J9472+*** Ammo pack pcs./MOQ 14000 13000 13400 12400 13600 14000 12800 13000 12400 12400 10400 8600 6800 5400 14800 13000 13400 14000 13600 15000 9000 Reel pcs./ MOQ 11200 10400 10800 10000 10800 11200 10400 10400 10000 10000 8400 7200 5600 4000 12000 2600 10800 11200 10800 9200 9200 Untaped pcs./ MOQ 9200 7200 7200 6800 7600 7600 7200 7200 6800 6400 4800 3600 2000 1800 1200 9200 7200 7200 7600 7200 5200 4000 2400 1600 6800 4800 3600 13000 10000 9000 10400 8000 7600 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Special dimensions available on request. For corresponding design rules, refer to chapter "General technical information", page . Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 5 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 32 B32561 General purpose (stacked) SilverCapTM Ordering codes and packing units (lead spacing 10 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 63 40 1.0 1.5 2.2 3.3 4.7 6.8 100 63 0.68 1.0 1.5 2.2 3.3 250 160 0.10 0.15 0.22 0.33 0.47 0.68 1.0 400 200 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 Max. dimensions w×h×l mm 3.5 × 6.2 × 11.0 4.3 × 6.9 × 11.0 5.1 × 7.9 × 11.0 6.4 × 9.1 × 11.0 7.3 × 11.0 × 11.0 8.8 × 12.7 × 11.0 3.6 × 6.3 × 11.5 4.5 × 6.9 × 11.5 5.6 × 7.8 × 11.5 6.9 × 9.0 × 11.5 7.8 × 10.5 × 11.5 2.8 × 5.3 × 11.5 3.3 × 6.0 × 11.5 4.2 × 6.6 × 11.5 5.2 × 7.5 × 11.5 6.3 × 8.5 × 11.5 7.5 × 9.7 × 11.5 9.5 × 11.0 × 11.5 2.5 × 5.1 × 11.5 2.6 × 6.0 × 11.5 3.2 × 6.6 × 11.5 4.0 × 6.9 × 11.5 5.2 × 7.7 × 11.5 6.6 × 8.5 × 11.5 8.0 × 9.5 × 11.5 9.8 × 11.0 × 11.5 Ordering code (composition see below) B32561J0105+*** B32561J0155+*** B32561J0225+*** B32561J0335+000 B32561J0475+000 B32561J0685+000 B32561J1684+*** B32561J1105+*** B32561J1155+*** B32561J1225+000 B32561J1335+000 B32561J3104+*** B32561J3154+*** B32561J3224+*** B32561J3334+*** B32561J3474+*** B32561J3684+000 B32561J3105+000 B32561J6333+*** B32561J6473+*** B32561J6683+*** B32561J6104+*** B32561J6154+*** B32561J6224+*** B32561J6334+000 B32561J6474+000 Ammo pack pcs./MOQ 4960 4200 3400 Reel pcs./ MOQ 7600 6000 5000 Untaped pcs./ MOQ 4000 2800 2000 1200 800 600 4000 2000 2000 1400 800 5200 4000 2800 2000 1400 800 600 6000 5200 4000 2800 2000 1400 800 600 5040 4200 3240 8000 6000 4800 6160 5040 4160 3360 2720 9200 8000 6000 5200 4400 6480 6240 5560 4360 3400 2720 9200 9200 8400 6800 5200 4000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Special dimensions available on request. For corresponding design rules, refer to chapter "General technical information", page . Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 5 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 32 B32561 General purpose (stacked) SilverCapTM Ordering codes and packing units (lead spacing 10 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 630 350 0.015 0.022 0.033 0.047 0.068 0.10 0.15 Max. dimensions w×h×l mm 2.8 × 6.3 × 11.0 3.4 × 6.9 × 11.0 4.2 × 7.6 × 11.0 5.3 × 8.0 × 11.0 6.3 × 9.0 × 11.0 7.3 × 11.4 × 11.0 8.8 × 13.3 × 11.0 Ordering code (composition see below) B32561J8153+*** B32561J8223+*** B32561J8333+*** B32561J8473+*** B32561J8683+000 B32561J8104+000 B32561J8154+000 Ammo pack pcs./MOQ 6320 5200 4080 3360 Reel pcs./ MOQ 9200 8000 6400 5000 Untaped pcs./ MOQ 4800 3600 2400 1800 1400 800 600 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Special dimensions available on request. For corresponding design rules, refer to chapter "General technical information", page . Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 5 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 32 B32562 General purpose (stacked) SilverCapTM Ordering codes and packing units (lead spacing 15 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 100 63 2.2 3.3 4.7 6.8 10 250 160 0.47 0.68 1.0 1.5 2.2 3.3 400 200 0.22 0.33 0.47 0.68 1.0 1.5 630 350 0.22 0.33 0.47 Max. dimensions w×h×l mm 4.9 × 8.0 × 16.5 6.0 × 9.3 × 16.5 7.3 × 10.6 × 16.5 9.0 × 11.8 × 16.5 11.8 × 13.0 × 16.5 5.0 × 6.7 × 16.5 6.0 × 7.8 × 16.5 7.0 × 9.3 × 16.5 8.7 × 11.0 × 16.5 10.7 × 12.8 × 16.5 13.9 × 14.5 × 16.5 4.7 × 7.5 × 16.5 6.0 × 8.3 × 16.5 7.3 × 9.3 × 16.5 8.9 × 10.8 × 16.5 10.9 × 12.5 × 16.5 13.7 × 15.2 × 16.5 9.2 × 12.2 × 16.5 11.2 × 14.2 × 16.5 13.5 × 16.3 × 16.5 Ordering code (composition see below) B32562J1225+*** B32562J1335+*** B32562H1475+*** B32562H1685+*** B32562H1106+000 B32562J3474+*** B32562J3684+*** B32562J3105+*** B32562H3155+*** B32562H3225+000 B32562H3335+000 B32562J6224+*** B32562J6334+*** B32562J6474+*** B32562H6684+*** B32562H6105+000 B32562H6155+000 B32562H8224+000 B32562H8334+000 B32562H8474+000 Ammo pack pcs./MOQ 4760 3840 3160 2560 4760 3840 3320 2640 Reel pcs./ MOQ 5200 4000 3600 2800 5200 4000 3600 2800 Untaped pcs./ MOQ 3200 2000 1600 1160 800 3800 2000 2000 1200 800 600 3400 2000 1800 1200 800 400 1400 1000 720 4960 3840 3160 2560 5200 4000 3600 2800 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Special dimensions available on request. For corresponding design rules, refer to chapter "General technical information", page . Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 5 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 32 B32563 General purpose (stacked) SilverCapTM Ordering codes and packing units (lead spacing 22.5 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 100 63 6.8 10 15 22 250 160 2.2 3.3 4.7 400 200 1.0 1.5 2.2 Max. dimensions w×h×l mm 7.0 × 10.5 × 24.0 8.6 × 12.2 × 24.0 10.9 × 14.0 × 24.0 12.8 × 17.2 × 24.0 8.3 × 11.2 × 24.0 10.1 × 13.5 × 24.0 12.2 × 15.5 × 24.0 8.3 × 11.2 × 24.0 10.3 × 13.2 × 24.0 12.6 × 15.5 × 24.0 Ordering code (composition see below) B32563J1685+000 B32563J1106+000 B32563J1156+000 B32563J1226+000 B32563J3225+000 B32563J3335+000 B32563J3475+000 B32563J6105+000 B32563J6155+000 B32563J6225+000 Untaped pcs./MOQ 3680 3840 2480 1440 2960 2800 1560 3400 2640 1440 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Special dimensions available on request. For corresponding design rules, refer to chapter "General technical information", page . Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% Packaging code: 000 = Untaped (lead length 5 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 32 B32564 General purpose (stacked) SilverCapTM Ordering codes and packing units (lead spacing 27.5 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 100 63 10 15 22 33 250 160 3.3 4.7 6.8 10 400 200 1.5 2.2 3.3 4.7 420 200 4.7 6.8 Max. dimensions w×h×l mm 7.6 × 11.0 × 29.0 9.1 × 13.5 × 29.0 11.0 × 16.0 × 29.0 13.0 × 19.8 × 29.0 7.9 × 14.0 × 29.0 9.6 × 15.8 × 29.0 11.9 × 18.0 × 29.0 13.8 × 22.5 × 29.0 7.8 × 14.2 × 29.0 9.6 × 16.4 × 29.0 12.2 × 18.8 × 29.0 14.2 × 22.8 × 29.0 16.0 × 20.0 × 29.0 16.0 × 20.0 × 29.0 Ordering code (composition see below) B32564J1106+000 B32564J1156+000 B32564J1226+000 B32564J1336+000 B32564J3335+000 B32564J3475+000 B32564J3685+000 B32564J3106+000 B32564J6155+000 B32564J6225+000 B32564J6335+000 B32564J6475+000 B32564T6475K000 B32564T6685K000 Untaped pcs./MOQ 2720 1720 1280 1440 3000 1600 1200 1120 3000 1600 1320 1040 1160 1160 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Special dimensions available on request. For corresponding design rules, refer to chapter "General technical information", page . The technical data given on the next pages do not apply to 420 V series. Please contact your nearest EPCOS representative if you need further information. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% Packaging code: 000 = Untaped (lead length 5 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 32 B32560 ... B32564 General purpose (stacked) SilverCapTM Technical data Operating temperature range Max. operating temperature Top,max Upper category temperature Tmax Lower category temperature Tmin Rated temperature TR CR ≤ 0.1 µF 1 kHz 8 8 10 kHz 15 15 100 kHz 30 VR CR ≤ 0.33 µF ≤ 100 V DC 3750 MΩ ≥ 250 V DC 7500 MΩ 125 °C +125 °C 55 °C +85 °C CR > 1 µF 10 Dissipation factor tan δ (in 10-3) at at 20 °C (upper limit values) 0.1 µF < CR ≤ 1 µF Insulation resistance Rins or time constant τ = CR Rins at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) DC test voltage 1.4 VR, 2 s TA (°C) DC voltage derating Category voltage VC (continuous operation with VDC TA ≤ 85 VC = VR or VAC at f ≤ 60 Hz) 85 10% > 2 upper limit value < 150 MΩ (CR ≤ 0.33 µF) < 50 s (CR > 0.33 µF) 1) Test criteria must be met after exposure to damp heat for 21 days Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 32 B32560 ... B32564 General purpose (stacked) SilverCapTM Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt values Lead spacing VR VRMS V DC V AC 63 40 100 63 250 160 400 200 420 200 630 350 630 400 1000 500 k0 values Lead spacing VR VRMS V DC V AC 63 40 100 63 250 160 400 200 420 200 630 350 630 400 1000 500 7.5 mm k0 in V2/µs 15 000 30 000 100 000 220 000 10 mm 15 mm 22.5 mm 27.5 mm 7.5 mm dV/dt in V/µs 120 150 200 275 10 mm 15 mm 22.5 mm 27.5 mm 60 75 150 175 320 50 100 125 150 50 100 125 25 50 60 60 320 360 7500 15 000 75 000 140 000 400 000 10 000 50 000 100 000 190 000 10 000 50 000 100 000 5 000 25 000 50 000 50 000 400 000 720 000 Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 32 B32560 ... B32564 General purpose (stacked) SilverCapTM Impedance Z versus frequency f (typical values) Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 32 B32560 General purpose (stacked) SilverCapTM Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 7.5 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 32 B32560 General purpose (stacked) SilverCapTM Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 7.5 mm 630 V DC/400 V AC 1000 V DC/500 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 32 B32561 General purpose (stacked) SilverCapTM Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 32 B32561 General purpose (stacked) SilverCapTM Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm 630 V DC/350 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 32 B32562 General purpose (stacked) SilverCapTM Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC 630 V DC/350 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 32 B32563 General purpose (stacked) SilverCapTM Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 22.5 mm 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 20 of 32 B32564 General purpose (stacked) SilverCapTM Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 27.5 mm 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC 420 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 21 of 32 B32560 ... B32564 General purpose (stacked) SilverCapTM Mounting guidelines 1 1.1 Soldering Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature Soldering time Immersion depth Evaluation criteria: Visual inspection 1.2 235 ±5 °C 2.0 ±0.5 s 2.0 +0/ 0.5 mm from capacitor body or seating plane Wetting of wire surface by new solder ≥90%, free-flowing solder Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: Series Solder bath temperature Soldering time 10 ±1 s MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing > 10 mm) MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤ 7.5 mm) MKT uncoated (lead spacing ≤ 10 mm) insulated (B32559) 5 ±1 s