B32621

Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: Date: B32620 ... B32621 May 2009 © EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Metallized polypropylene film capacitors (MKP) High pulse (stacked) B32620 ... B32621 Typical applications Compact fluorescent lamps (CFL) SMPS Climatic Max. operating temperature: 105 °C Climatic category (IEC 60068-1): 55/100/56 Construction Dielectric: polypropylene (PP) Stacked-film technology Plastic case (UL 94 V-0) Epoxy resin sealing Features Very high pulse strength Very good self-healing properties Smallest possible dimensions High contact reliability Terminals Parallel wire leads, lead-free tinned Special lead lengths available on request Dimensional drawing Dimensions in mm Lead spacing ±0.4 7.5 10.0 Lead diameter Type d1 0.5 B32620 0.61) B32621 1) 0.5 mm for capacitor width w = 4 mm Marking Manufacturer's logo, rated capacitance (coded), cap. tolerance (code letter), rated voltage, date of manufacture (coded), for lead spacing 7.5 mm: style (MKP), for lead spacing 10 mm: lot number, series number (621) Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to chapter "Taping and packing“. Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 30 B32620 ... B32621 High pulse (stacked) Overview of available types Lead spacing 7.5 mm Type Page VR (V DC) VRMS (V AC) CR (nF) 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 B32620 4 160 90 250 140 400 200 630 400 1000 500 1000 600 10.0 mm B32621 6 160 90 250 140 400 200 630 400 1000 500 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 30 B32620 High pulse (stacked) Ordering codes and packing units (lead spacing 7.5 mm) VR V DC 160 VRMS CR f ≤1 kHz V AC nF 90 33 47 68 100 150 140 22 33 47 68 100 200 6.8 10 15 22 33 400 1.5 2.2 3.3 4.7 6.8 10 15 500 1.5 2.2 3.3 4.7 6.8 Max. dimensions w×h×l mm 4.0 × 8.5 × 10.0 4.0 × 8.5 × 10.0 5.0 × 10.5 × 10.0 5.0 × 10.5 × 10.0 6.0 × 12.0 × 10.3 4.0 × 8.5 × 10.0 4.0 × 8.5 × 10.0 5.0 × 10.5 × 10.0 5.0 × 10.5 × 10.0 6.0 × 12.0 × 10.3 4.0 × 8.5 × 10.0 4.0 × 8.5 × 10.0 5.0 × 10.5 × 10.0 5.0 × 10.5 × 10.0 6.0 × 12.0 × 10.3 4.0 × 8.5 × 10.0 4.0 × 8.5 × 10.0 4.0 × 8.5 × 10.0 4.0 × 8.5 × 10.0 5.0 × 10.5 × 10.0 5.0 × 10.5 × 10.0 6.0 × 12.0 × 10.3 4.0 × 8.5 × 10.0 4.0 × 8.5 × 10.0 5.0 × 10.5 × 10.0 5.0 × 10.5 × 10.0 6.0 × 12.0 × 10.3 Ordering code (composition see below) B32620A5333+*** B32620A5473+*** B32620A5683+*** B32620A5104+*** B32620A5154+*** B32620A3223+*** B32620A3333+*** B32620A3473+*** B32620A3683+*** B32620A3104+*** B32620A4682+*** B32620A4103+*** B32620A4153+*** B32620A4223+*** B32620A4333+*** B32620A6152+*** B32620A6222+*** B32620A6332+*** B32620A6472+*** B32620A6682+*** B32620A6103+*** B32620A6153+*** B32620A0152+*** B32620A0222+*** B32620A0332+*** B32620A0472+*** B32620A0682+*** Ammo pack pcs./MOQ 8000 8000 6400 6400 5200 8000 8000 6400 6400 5200 8000 8000 6400 6400 5200 8000 8000 8000 8000 6400 6400 5200 8000 8000 6400 6400 5200 Reel pcs./ MOQ 7200 7200 5600 5600 4400 7200 7200 5600 5600 4400 7200 7200 5600 5600 4400 7200 7200 7200 7200 5600 5600 4400 7200 7200 5600 5600 4400 Untaped pcs./ MOQ 6000 6000 4000 4000 3000 6000 6000 4000 4000 3000 6000 6000 4000 4000 3000 6000 6000 6000 6000 4000 4000 3000 6000 6000 4000 4000 3000 250 400 630 1000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 30 B32620 High pulse (stacked) Ordering codes and packing units (lead spacing 7.5 mm) VR V DC 1000 VRMS CR f ≤1 kHz V AC nF 600 0.47 0.68 1.0 1.5 2.2 3.3 4.7 Max. dimensions w×h×l mm 4.0 × 8.5 × 10.0 5.0 × 10.5 × 10.0 5.0 × 10.5 × 10.0 5.0 × 10.5 × 10.0 5.0 × 10.5 × 10.0 5.0 × 10.5 × 10.0 6.0 × 12.0 × 10.3 Ordering code (composition see below) B32620J0471+*** B32620J0681+*** B32620J0102+*** B32620J0152+*** B32620J0222+*** B32620J0332+*** B32620J0472+*** Ammo pack pcs./MOQ 8000 6400 6400 6400 6400 6400 5200 Reel pcs./ MOQ 7200 5600 5600 5600 5600 5600 4400 Untaped pcs./ MOQ 6000 4000 4000 4000 4000 4000 3000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 30 B32621 High pulse (stacked) Ordering codes and packing units (lead spacing 10 mm) VR V DC 160 VRMS CR f ≤1 kHz V AC nF 90 47 68 100 150 220 140 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 200 10 15 22 33 47 400 2.2 3.3 4.7 6.8 10 15 22 33 Max. dimensions w×h×l mm 4.0 × 7.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 6.0 × 12.0 × 13.0 Ordering code (composition see below) B32621A5473+*** B32621A5683+*** B32621A5104+*** B32621A5154+*** B32621A5224+*** B32621A3222+*** B32621A3332+*** B32621A3472+*** B32621A3682+*** B32621A3103+*** B32621A3153+*** B32621A3223+*** B32621A3333+*** B32621A3473+*** B32621A3683+*** B32621A3104+*** B32621A4103+*** B32621A4153+*** B32621A4223+*** B32621A4333+*** B32621A4473+*** B32621A6222+*** B32621A6332+*** B32621A6472+*** B32621A6682+*** B32621A6103+*** B32621A6153+*** B32621A6223+*** B32621A6333+*** Ammo pack pcs./MOQ 4000 4000 3320 3320 2720 4000 4000 4000 4000 4000 4000 4000 4000 4000 3320 2720 4000 4000 3320 3320 2720 4000 4000 4000 4000 4000 3320 2720 2720 Reel pcs./ MOQ 6800 6800 5200 5200 4400 6800 6800 6800 6800 6800 6800 6800 6800 6800 5200 4400 6800 6800 5200 5200 4400 6800 6800 6800 6800 6800 5200 4400 4400 Untaped pcs./ MOQ 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 250 400 630 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 30 B32621 High pulse (stacked) Ordering codes and packing units (lead spacing 10 mm) VR V DC 1000 VRMS CR f ≤1 kHz V AC nF 500 2.2 3.3 4.7 6.8 10 Max. dimensions w×h×l mm 4.0 × 7.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 Ordering code (composition see below) B32621A0222+*** B32621A0332+*** B32621A0472+*** B32621A0682+*** B32621A0103+*** Ammo pack pcs./MOQ 4000 4000 4000 3320 2720 Reel pcs./ MOQ 6800 6800 6800 5200 4400 Untaped pcs./ MOQ 4000 4000 4000 4000 4000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 30 B32620 ... B32621 High pulse (stacked) Technical data Operating temperature range Max. operating temperature Top,max Upper category temperature Tmax Lower category temperature Tmin Rated temperature TR CR ≤ 0.1 µF 1 kHz 10 kHz 100 kHz 100 GΩ +105 °C +100 °C 55 °C +85 °C 0.1 µF < CR ≤ 0.22 µF 1.0 1.5 Dissipation factor tan δ (in 10-3) at at 20 °C (upper limit values) 4.0 Insulation resistance Rins at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) DC test voltage 1.6 VR, 2 s TA (°C) DC voltage derating Category voltage VC (continuous operation with VDC TA ≤ 85 VC = VR or VAC at f ≤ 1 kHz) 85 4 upper limit value < 1500 MΩ Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 30 B32620 ... B32621 High pulse (stacked) Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt values Lead spacing VR VRMS V DC V AC 160 90 250 140 400 200 630 400 1 000 500 1 000 600 k0 values Lead spacing VR VRMS V DC V AC 160 90 250 140 400 200 630 400 1 000 500 1 000 600 7.5 mm k0 in V2/µs 240 000 600 000 1 200 000 3 400 000 6 400 000 8 000 000 10 mm 7.5 mm dV/dt in V/µs 750 1 200 1 500 2 700 3 200 4 000 10 mm 600 900 1 050 1 800 2 400 190 000 450 000 840 000 2 250 000 4 800 000 Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 30 B32620 ... B32621 High pulse (stacked) Impedance Z versus frequency f (typical values) Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 30 B32620 High pulse (stacked) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C) For TA >90 °C, please refer to "General technical information", section 3.2.3. Lead spacing 7.5 mm 160 V DC/90 V AC 250 V DC/140 V AC 400 V DC/200 V AC 630 V DC/400 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 30 B32620 High pulse (stacked) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C) For TA >90 °C, please refer to "General technical information", section 3.2.3. Lead spacing 7.5 mm 1000 V DC/500 V AC 1000 V DC/600 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 30 B32621 High pulse (stacked) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C) For TA >90 °C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm 160 V DC/90 V AC 250 V DC/140 V AC 400 V DC/200 V AC 630 V DC/400 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 30 B32621 High pulse (stacked) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C) For TA >90 °C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm 1000 V DC/500 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 30 B32620 ... B32621 High pulse (stacked) Sinus-wave application, lighting Permissible voltage and current / waveform Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 30 B32620 High pulse (stacked) Sinus-wave application, lighting Permissible current Ipp versus rated capacitance CR Lead spacing 7.5 mm 160 V DC/90 V AC 250 V DC/140 V AC 400 V DC/200 V AC 630 V DC/400 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 30 B32620 High pulse (stacked) Sinus-wave application, lighting Permissible current Ipp versus rated capacitance CR Lead spacing 7.5 mm 1000 V DC/500 V AC 1000 V DC/600 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 30 B32621 High pulse (stacked) Sinus-wave application, lighting Permissible current Ipp versus rated capacitance CR Lead spacing 10 mm 160 V DC/90 V AC 250 V DC/140 V AC 400 V DC/200 V AC 630 V DC/400 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 30 B32621 High pulse (stacked) Sinus-wave application, lighting Permissible current Ipp versus rated capacitance CR Lead spacing 10 mm 1000 V DC/500 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 30 B32620 ... B32621 High pulse (stacked) Mounting guidelines 1 1.1 Soldering Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature Soldering time Immersion depth Evaluation criteria: Visual inspection 1.2 235 ±5 °C 2.0 ±0.5 s 2.0 +0/ 0.5 mm from capacitor body or seating plane Wetting of wire surface by new solder ≥90%, free-flowing solder Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: Series Solder bath temperature Soldering time 10 ±1 s MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing > 10 mm) MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤ 7.5 mm) MKT uncoated (lead spacing ≤ 10 mm) insulated (B32559) 5 ±1 s