B32911B5103M000

Film Capacitors EMI Suppression Capacitors (MKP) Series/Type: B32911 ... B32918 Date: February 2015 © EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EMI suppression capacitors (MKP) B32911 ... B32918 X1 / 530 V AC Typical applications X1 class for interference suppression "Across the line" applications Dimensional drawing Drawing 1 Climatic Max. operating temperature: 110 °C Climatic category (IEC 60068-1): 40/110/56 Construction Dielectric: polypropylene (MKP) Plastic case (UL 94 V-0) Epoxy resin sealing (UL 94 V-0) Features Small dimensions Good self-healing properties High voltage capability RoHS-compatible Halogen-free capacitors available on request Drawing 2 Terminals Parallel wire leads, lead-free tinned Special lead lengths available on request Marking Manufacturer's logo, lot number, date code, rated capacitance (coded), capacitance tolerance (code letter), rated AC voltage (IEC), series number, sub-class (X1), dielectric code (MKP), climatic category, passive flammability category, approvals. Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For taping details, refer to chapter "Taping and packing". P1 = 20.3 mm Dimensions in mm Pin Lead spacing ±0.4 Lead Type diameter d1 ±0.05 Drawing 2 10 0.6 B32911 1 2 15 0.8 B32912 1 2 22.5 0.8 B32913 1 2 27.5 0.8 B32914 1 2 37.5 1.0 B32916 1 / 21) 4 52.5 1.2 B32918 2 1) A few individual types only Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 24 B32911 ... B32918 X1 / 530 V AC Approvals Marking examples (position of marks may vary): Approvals Approval marks Standards EN 60384-14, IEC 60384-14 UL 60384-14, CSA E60384-14 Notes: Certificate ENEC- 00955 (approved by UL Demko) E97863 Effective January 2014, only for EMI supression capacitors: – UL 60384-14 certification replaces both UL 1414 and UL 1283 standards. – CSA C22.2 No. 1 and CSA C22.s No. 8 are replaced by CSA E60384-14. – References like 1414, 1283 are removed from the capacitor marking Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 24 B32911 ... B32918 X1 / 530 V AC Overview of available types Lead spacing 10 mm 15 mm 22.5 mm 27.5 mm 37.5 mm 52.5 mm Type B32912 B32913 B32914 B32916 B32918 B32911 CR (µF) 0.0010 0.0015 0.0022 0.0033 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.022 0.033 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.22 0.33 0.47 0.56 0.68 0.82 1.0 1.5 1.8 2.2 3.3 4.7 5.6 Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 24 B32911 ... B32918 X1 / 530 V AC Ordering codes and packing units Lead CR spacing mm 10 15 µF 0.0010 0.0015 0.0022 0.0033 0.0047 0.0056 0.0068 0.0082 0.010 0.010 0.012 0.0068 0.0068 0.0082 0.0082 0.010 0.010 0.015 0.022 Max. dimensions w×h×l mm 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 6.0 × 12.0 × 13.0 5.0 × 10.5 × 18.0 5.5 × 8.5 × 18.0 5.0 × 10.5 × 18.0 5.5 × 8.5 × 18.0 5.0 × 10.5 × 18.0 5.5 × 8.5 × 18.0 5.0 × 10.5 × 18.0 5.5 × 11.0 × 18.0 Ordering code (composition see below) B32911A5102+*** B32911A5152+*** B32911A5222+*** B32911A5332+*** B32911A5472+*** B32911A5562+*** B32911A5682+*** B32911A5822+*** B32911A5103M*** B32911B5103+*** B32911A5123+*** B32912B5682+*** B32912A5682+*** B32912B5822+*** B32912A5822+*** B32912B5103+*** B32912A5103M*** B32912A5153+*** B32912A5223+*** Straight terminals, Ammo pack pcs./MOQ 4000 4000 4000 4000 4000 3320 3320 3320 3320 2720 2720 4680 4280 4680 4280 4680 4280 4680 4280 Pins Straight Straight terminals, terminals, Reel Untaped pcs./MOQ 6800 6800 6800 6800 6800 5200 5200 5200 5200 4400 4400 5200 4800 5200 4800 5200 4800 5200 4800 pcs./MOQ 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 240 = Crimped down from lead spacing 10 mm to 7.5 mm, Ammo pack 140 = Crimped down from lead spacing 10 mm to 7.5 mm, Reel 255 = Crimped down from lead spacing 15 mm to 7.5 mm, Ammo pack 155 = Crimped down from lead spacing 15 mm to 7.5 mm, Reel 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 000 = Straight terminals, untaped (lead length 6 - 1 mm) Page 5 of 24 B32911 ... B32918 X1 / 530 V AC Ordering codes and packing units Lead CR spacing mm 15 22.5 µF 0.033 0.033 0.047 0.056 0.068 0.082 0.10 0.12 0.033 0.047 0.056 0.068 0.082 0.10 0.10 0.10 0.15 0.22 0.22 Max. dimensions w×h×l mm Ordering code (composition see below) 6.0 × 12.0 × 18.0 7.0 × 12.5 × 18.0 8.0 × 14.0 × 18.0 8.0 × 14.0 × 18.0 9.0 × 17.5 × 18.0 9.0 × 17.5 × 18.0 11.0 × 18.5 × 18.0 11.0 × 18.5 × 18.0 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 7.0 × 16.0 × 26.5 7.5 × 14.0 × 26.5 8.5 × 16.5 × 26.5 10.5 × 16.5 × 26.5 10.5 × 18.5 × 26.5 B32912A5333M*** B32912B5333+*** B32912A5473+*** B32912A5563+*** B32912A5683+*** B32912A5823M*** B32912A5104+*** B32912A5124M*** B32913A5333+*** B32913A5473+*** B32913A5563+*** B32913A5683+*** B32913A5823+*** B32913A5104M*** B32913C5104+*** B32913B5104+*** B32913A5154+*** B32913A5224M*** B32913B5224+*** Straight terminals, Ammo pack pcs./MOQ 3840 3320 2920 2920 2560 2560   2720 2720 2720 2720 2720 2720 2320 2200 1920 1560 1560 Pins Straight Straight terminals, terminals, Reel Untaped pcs./MOQ 4400 3600 3000 3000 2800 2800 2200 2200 2800 2800 2800 2800 2800 2800 2400 2000 2000 1600 1600 pcs./MOQ 4000 4000 2000 2000 2000 2000 1200 1200 2880 2880 2880 2880 2880 2880 2520 2280 2040 2160 2160 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 240 = Crimped down from lead spacing 10 mm to 7.5 mm, Ammo pack 140 = Crimped down from lead spacing 10 mm to 7.5 mm, Reel 255 = Crimped down from lead spacing 15 mm to 7.5 mm, Ammo pack 155 = Crimped down from lead spacing 15 mm to 7.5 mm, Reel 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 000 = Straight terminals, untaped (lead length 6 - 1 mm) Page 6 of 24 B32911 ... B32918 X1 / 530 V AC Ordering codes and packing units Lead CR spacing mm 22.5 27.5 µF 0.33 0.33 0.47 0.15 0.22 0.33 0.47 0.47 0.56 0.56 0.68 0.68 0.68 0.82 0.82 1.0 1.0 1.5 1.8 Max. dimensions w×h×l mm Ordering code (composition see below) 11.0 × 20.5 × 26.5 12.0 × 22.0 × 26.5 14.5 × 29.5 × 26.5 11.0 × 19.0 × 31.5 11.0 × 19.0 × 31.5 11.0 × 19.0 × 31.5 12.5 × 21.5 × 31.5 13.5 × 23.0 × 31.5 13.5 × 23.0 × 31.5 14.0 × 24.5 × 31.5 14.0 × 24.5 × 31.5 16.0 × 32.0 × 31.5 18.0 × 27.5 × 31.5 16.0 × 32.0 × 31.5 18.0 × 27.5 × 31.5 16.0 × 32.0 × 31.5 18.0 × 27.5 × 31.5 22.0 × 36.5 × 31.5 22.0 × 36.5 × 31.5 B32913A5334M*** B32913B5334+*** B32913A5474+*** B32914A5154+*** B32914A5224+*** B32914A5334M*** B32914A5474M*** B32914B5474+*** B32914A5564M*** B32914B5564+*** B32914A5684M*** B32914C5684+*** B32914B5684+*** B32914B5824+*** B32914A5824+*** B32914B5105+*** B32914A5105M*** B32914A5155+*** B32914A5185M*** Straight terminals, Ammo pack pcs./MOQ 1480                   Pins Straight Straight terminals, terminals, Reel Untaped pcs./MOQ 1400   1400 1400 1400 1200 1000 1000 1000 1000         pcs./MOQ 2040 1800 1040 1280 1280 1280 1120 1040 1040 1040 1040 880 800 880 800 880 800 640 640 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 240 = Crimped down from lead spacing 10 mm to 7.5 mm, Ammo pack 140 = Crimped down from lead spacing 10 mm to 7.5 mm, Reel 255 = Crimped down from lead spacing 15 mm to 7.5 mm, Ammo pack 155 = Crimped down from lead spacing 15 mm to 7.5 mm, Reel 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 000 = Straight terminals, untaped (lead length 6 - 1 mm) Page 7 of 24 B32911 ... B32918 X1 / 530 V AC Ordering codes and packing units Lead CR spacing mm 37.5 µF 0.22 0.33 0.47 0.56 0.56 0.68 0.68 0.82 0.82 1.0 1.0 1.0 1.0 1.5 1.5 2.2 2.2 3.3 3.3 Max. dimensions w×h×l mm Ordering code (composition see below) 12.0 × 22.0 × 41.5 12.0 × 22.0 × 41.5 12.0 × 22.0 × 41.5 12.0 × 22.0 × 41.5 24.0 × 15.0 × 41.5 12.0 × 22.0 × 41.5 24.0 × 15.0 × 41.5 14.0 × 25.0 × 41.5 24.0 × 15.0 × 41.5 14.0 × 25.0 × 41.5 16.0 × 28.5 × 41.5 24.0 × 15.0 × 41.5 24.0 × 19.0 × 41.5 16.0 × 28.5 × 41.5 17.0 × 32.0 × 41.5 20.0 × 39.5 × 41.5 31.0 × 26.5 × 42.0 28.0 × 37.0 × 42.0 28.0 × 42.5 × 42.0 B32916A5224+*** B32916A5334+*** B32916A5474+*** B32916A5564+*** B32916B5564+*** B32916A5684+*** B32916B5684+*** B32916A5824M*** B32916B5824+*** B32916A5105M*** B32916C5105+*** B32916B5105M*** B32916D5105+*** B32916A5155M*** B32916B5155+*** B32916A5225+*** B32916B5225+*** B32916A5335M*** B32916B5335+*** Straight terminals, Ammo pack pcs./MOQ                    Pins Straight Straight terminals, terminals, Reel Untaped pcs./MOQ                    pcs./MOQ 1620 1620 1620 1620 1040 1620 1040 1380 1040 1380 800 1040 780 800 760 640 600 440 440 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 240 = Crimped down from lead spacing 10 mm to 7.5 mm, Ammo pack 140 = Crimped down from lead spacing 10 mm to 7.5 mm, Reel 255 = Crimped down from lead spacing 15 mm to 7.5 mm, Ammo pack 155 = Crimped down from lead spacing 15 mm to 7.5 mm, Reel 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 000 = Straight terminals, untaped (lead length 6 - 1 mm) Page 8 of 24 B32911 ... B32918 X1 / 530 V AC Ordering codes and packing units Lead CR spacing mm 37.5 52.5 µF 4.7 4.7 5.6 4.7 5.6 5.6 Max. dimensions w×h×l mm Ordering code (composition see below) 30.0 × 45.0 × 42.0 33.0 × 48.0 × 42.0 33.0 × 48.0 × 42.0 30.0 × 45.0 × 57.5 30.0 × 45.0 × 57.5 35.0 × 50.0 × 57.5 B32916A5475M*** B32916B5475+*** B32916A5565M*** B32918A5475+*** B32918A5565+*** B32918B5565+*** Straight terminals, Ammo pack pcs./MOQ       Pins Straight Straight terminals, terminals, Reel Untaped pcs./MOQ pcs./MOQ  400 4  180 4  180 4  280 4  280 4  108 4 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 240 = Crimped down from lead spacing 10 mm to 7.5 mm, Ammo pack 140 = Crimped down from lead spacing 10 mm to 7.5 mm, Reel 255 = Crimped down from lead spacing 15 mm to 7.5 mm, Ammo pack 155 = Crimped down from lead spacing 15 mm to 7.5 mm, Reel 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 000 = Straight terminals, untaped (lead length 6 - 1 mm) Page 9 of 24 B32911 ... B32918 X1 / 530 V AC Technical data Reference standard: IEC / UL 60384-14. All data given at T = 20 °C unless otherwise specified. Rated AC voltage ( IEC 60384-14 ) 530 V (50/60 Hz) Maximum continuous DC voltage VDC 1000 V Max. operating temperature Top,max +110 °C DC test voltage 2700 V, 2 s The repetition of this DC voltage test may damage the capacitor. Special care must be taken in case of use several capacitors in a parallel configuration. Dissipation factor tan δ (in 10-3) at 20 °C (upper limit values) CR ≤ 2.2 µF CR > 2.2 µF at 1 kHz 1 2 Insulation resistance Rins or time constant τ = CR  Rins at 100 V DC, 20 °C, rel. humidity ≤ 65% and for 60 s (minimum as-delivered values) CR ≤ 0.33 µF CR > 0.33 µF 30 000 MΩ 10 000 s Passive flammability category B Capacitance tolerances (measured at 1 kHz) ±10% (K), ±20% (M) Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt and k0 values Lead spacing dV/dt in V/µs k0 in V2/µs 10 mm 550 473 000 Please read Cautions and warnings and Important notes at the end of this document. 15 mm 400 344 000 22.5 mm 200 172 000 Page 10 of 24 27.5 mm 150 129 000 37.5 mm 100 86 000 52.5 mm 40 34 400 B32911 ... B32918 X1 / 530 V AC Impedance Z versus frequency f (typical values) Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 24 B32911 ... B32918 X1 / 530 V AC Testing and Standards Test Reference Electrical Parameters IEC 60384-14 Robustness of terminations Resistance to soldering heat Conditions of test Voltage Proof: Between terminals, 4.3 VR, 1 min. Terminals and enclosure: 2 VR + 1500 V AC Insulation resistance, RINS Capacitance, C Dissipation factor, tan δ IEC 60068-2-21 Tensile strength (test Ua1) Tensile Wire diameter force 0.5 < d1 ≤ 0.8 mm 10 N 0.8 < d1 ≤ 1.25 mm 20 N IEC 60068-2-20, Solder bath temperature at test Tb, 260 ± 5 °C, immersion for method 1A 10 seconds Performance requirements Within specified limits Capacitance and tan δ within specified limits ∆C/C0 ≤ 5% tan δ within specified limits No visible damage I∆C/C0 I ≤ 5% tan δ within specified limits Rapid change of IEC 60384-16 temperature TA = lower category temperature TB = upper category temperature Five cycles, duration t = 30 min. Vibration IEC 60384-14 Bump IEC 60384-14 Climatic sequence IEC 60384-14 Test FC: vibration sinusoidal No visible damage Displacement: 0.75 mm Accleration: 98 m/s2 Frequency: 10 Hz ... 500 Hz Test duration: 3 orthogonal axes, 2 hours each axe Test Eb: Total 4000 bumps with No visible damage I∆C/C0 I ≤ 5% 400 m/s2 mounted on PCB tan δ within specified 6 ms duration limits Dry heat  TB / 16 h. No visible damage Damp heat cyclic, 1st cycle I∆C/C0 I ≤ 5% + 55 °C / 24h / 95% ... 100% RH I∆ tan δ I ≤ 0.008, Cold  TA / 2h C ≤ 1 µF Damp heat cyclic, 5 cycles I∆ tan δ I > 0.005, + 55 °C / 24h / 95% ... 100% rh C > 1 µF Voltage proof RINS ≥ 50% of initial limit Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 24 B32911 ... B32918 X1 / 530 V AC Damp Heat Steady State IEC 60384-14 Test Ca 40 °C / 93% RH / 56 days No visible damage I∆C/C0 I ≤ 5% I∆ tan δ I ≤ 0.008, C ≤ 1 µF I∆ tan δ I > 0.005, C > 1 µF Voltage proof RINS ≥ 50% of initial limit No visible damage I∆C/C0 I ≤ 10% I∆ tan δ I ≤ 0.008, C ≤ 1 µF I∆ tan δ I > 0.005, C > 1 µF Voltage proof RINS ≥ 50% of initial limit Impulse test Endurance IEC 60384-14 3 impulses TB / 1.25 VR / 1000 hours, 1000 Vrms for 0.1 s every hour Passive flammability IEC 60384-14 Flame applied for a period of time B depending on capacitor volume Active flammability IEC 60384-14 20 discharges at 2.5 kV + VR The cheesecloth shall not burn with a flame Mounting guidelines 1 Soldering 1.1 Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature 235 ±5 °C Soldering time 2.0 ±0.5 s Immersion depth 2.0 +0/0.5 mm from capacitor body or seating plane Evaluation criteria: Visual inspection Wetting of wire surface by new solder ≥90%, free-flowing solder Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 24 B32911 ... B32918 X1 / 530 V AC 1.2 Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: Series Solder bath temperature Soldering time MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing > 10 mm) MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤ 7.5 mm) MKT uncoated (lead spacing ≤ 10 mm) insulated (B32559) 10 ±1 s 5 ±1 s