B7680

SAW Components SAW Duplexer WCDMA Band IV (AWS) Series/type: Ordering code: Date: Version: B7680 B39212B7680A710 June 06, 2008 2.0 © EPCOS AG 2008. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components SAW Duplexer Data Sheet Application s Low-loss SAW duplexer for mobile telephone B7680 1732.5 / 2132.5 MHz WCDMA Band IV (AWS) systems Low insertion attenuation Low amplitude ripple Usable passband 45 MHz Single ended to balanced transformation in Antenna - Rx path s Impedance transformation 50Ω to 100Ω in Antenna - Rx path s s s s Features Package size 3.0 x 2.5 x 0.9 mm3 RoHS compatible Approx. weight 0.035 g Package for Surface Mount Technology (SMT) s Ni, gold-plated terminals s Fully matched by integrated matching network s Electrostatic Sensitive Device (ESD) s s s s 0,65 5 6 7 0,5 0,6 bottom view 8 9 0,4 4 1,1 0, 9 0,5 side view top view 3 2 1 3,0 2,5 Pin configuration s s s s s 3 1, 8 6 2, 4, 5 7, 9 TX Input RX Output (balanced) Antenna To be grounded To be grounded 1 3 8 2,7 4,5,9 6 Please read cautions and warnings and important notes at the end of this document. 2 June 06, 2008 SAW Components SAW Duplexer Data Sheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –20 ˚C to +85 ˚C ZANT= 50 Ω ZRX = 100 Ω ZTX = 50 Ω B7680 1732.5 / 2132.5 MHz Characterisitcs TX - ANT Center frequency Maximum insertion attenuation @fcarrier1712.4 ... 1752.6 Amplitude ripple (p-p) @fcarrier1712.4 ... 1752.6 Amplitude ripple (p-p) per 5 MHz-channel 1710.0 ... 1755.0 Error Vector Magnitude @fcarrier1712.4 ... 1752.6 Input VSWR (TX port) 1710.0 ... 1755.0 Output VSWR (ANT port) 1710.0 ... 1755.0 Attenuation 10.0 1574.0 1805.0 1930.0 @fcarrier2112.4 2400.0 3420.0 5130.0 5725.0 6840.0 8550.0 10260.0 11970.0 1) 2) min. fC typ. @ 25 ˚C 1732.5 max. MHz MHz αWCDMA1) MHz ∆αWCDMA1) 1.7 0.4 2.0 1.0 dB dB MHz ∆αch MHz EVM2) MHz MHz α MHz MHz MHz MHz MHz αWCDMA1) MHz MHz MHz MHz MHz MHz MHz MHz 0.2 0.9 1.8 1.6 0.5 2.0 2.1 2.0 dB % ... 1574.0 ... 1577.0 ... 1880.0 ... 1990.0 ... 2152.6 ... 2500.0 ... 3510.0 ... 5350.0 ... 5850.0 ... 7020.0 ... 8775.0 ... 10530.0 ... 12285.0 30 40 20 27 42 29 20 18 15 35 44 43 40 51 36 29 23 19 10 23 34 31 dB dB dB dB dB dB dB dB dB dB dB dB dB Attenuation of WCDMA signal (“Powertransferfunction“). Please refer to annotation on page (6). Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. Please read cautions and warnings and important notes at the end of this document. 3 June 06, 2008 SAW Components SAW Duplexer Data Sheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –20 ˚C to +85 ˚C ZANT= 50 Ω ZRX = 100 Ω ZTX = 50 Ω B7680 1732.5 / 2132.5 MHz Characterisitcs ANT - RX Center frequency Maximum insertion attenuation @fcarrier2112.4 ... 2152.6 Amplitude ripple (p-p) @fcarrier2112.4 ... 2152.6 Amplitude ripple (p-p) per 5 MHz-channel 2110.0 ... 2155.0 Error Vector Magnitude @fcarrier2112.4 ... 2152.6 Input VSWR (ANT port) 2110.0 ... 2155.0 Output VSWR (RX port) 2110.0 ... 2155.0 fC min. typ. @ 25 ˚C 2132.5 max. MHz MHz αWCDMA1) MHz ∆αWCDMA1) 2.1 0.3 2.5 1.0 dB dB MHz ∆αch MHz EVM2) MHz MHz -10 -1.0 0.2 0.5 1.6 1.8 -7 0.5 0.5 2.0 2.0 2.0 10 1.0 dB % Output phase balance (φ(S31)−φ(S21)+180˚) 2110.0 ... 2155.0 MHz Output amplitude balance (|S31/S21|) 2110.0 ... 2155.0 MHz IMD Product Level Limits at fTX = 1732.5 MHz fRX = 2132.5 MHz3) Blocker 1 400 MHz Blocker 2 2 fTX +400 MHz Blocker 3 fTX -400 MHz Blocker 4 3 fTX + 400 MHz 1) 2) 3) degree dB -123 -112 -114 -125 -106 -106 -109 -109 dBm dBm dBm dBm Attenuation of WCDMA signal (“Powertransferfunction“). Please refer to annotation on page (6). Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. Power levels: 21 dBm Tx signal, -15dBm blocker at antenna port. Please read cautions and warnings and important notes at the end of this document. 4 June 06, 2008 SAW Components SAW Duplexer Data Sheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –20 ˚C to +85 ˚C ZANT= 50 Ω ZRX = 100 Ω ZTX = 50 Ω B7680 1732.5 / 2132.5 MHz Characterisitcs ANT - RX Attenuation 10.0 @fcarrier1712.4 1755.0 2240.0 2400.0 2484.0 6000.0 10540.0 1) min. α MHz MHz αWCDMA1) MHz MHz MHz MHz MHz MHz typ. @ 25 ˚C 49 54 33 33 42 40 53 28 max. ... 1710.0 ... 1752.6 ... 2025.0 ... 2400.0 ... 2484.0 ... 6000.0 ... 6475.0 ... 10785.0 35 45 15 15 30 35 - dB dB dB dB dB dB dB dB Attenuation of WCDMA signal (“Powertransferfunction“). Please refer to annotation on page (6). Characterisitcs TX - RX Isolation @fcarrier1712.4 @fcarrier2112.4 1) min. αWCDMA1) typ. @ 25 ˚C 56 47 max. ... 1752.6 ... 2152.6 MHz MHz 53 43 dB dB Attenuation of WCDMA signal (“Powertransferfunction“). Please refer to annotation on page (6). Please read cautions and warnings and important notes at the end of this document. 5 June 06, 2008 SAW Components SAW Duplexer Data Sheet B7680 1732.5 / 2132.5 MHz Maximum ratings Temperature range for specification 1) Operable temperature range2) Storage temperature range DC voltage ESD voltage Input power at 1710.0 ... 1755.0 MHz elsewhere 1) 2) T T Tstg VDC VESD PIN -20/+85 –30/+85 –40/+85 5 503) 29 10 ˚C ˚C V V dBm dBm machine model, 10 pulses source and load impedance 50 Ω continuous wave T = 50˚C, 5.000 h } Defines the temperature range in which the specification values are warranted. Defines the temperature range in which the SAW device keeps its typical characteristics, however the specification values are not guaranteed. acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses. 3) Annotation for characteristics section Attenuation of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by ∫∞ Sds 21 ( f ) HRRC ( f – f Carrier ) ∞ 2 df fCarrier according to 3GPP TS 25.101 (e.g. for WCDMA Band 5-Passband, fCarrier ranges from 826.4 MHz (lowest Tx channel) to 846.6 MHz (highest Tx channel)). HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following normalization: ∫∞ HRRC ( f ) ∞ 2 df = 1 Please read cautions and warnings and important notes at the end of this document. 6 June 06, 2008 SAW Components SAW Duplexer Data Sheet Frequency response TX-ANT B7680 1732.5 / 2132.5 MHz Frequency response TX-ANT (wideband) Please read cautions and warnings and important notes at the end of this document. 7 June 06, 2008 SAW Components SAW Duplexer Data Sheet Frequency response RX-ANT B7680 1732.5 / 2132.5 MHz Frequency response RX-ANT (wideband) Please read cautions and warnings and important notes at the end of this document. 8 June 06, 2008 SAW Components SAW Duplexer Data Sheet Frequency response TX-RX B7680 1732.5 / 2132.5 MHz Frequency response TX-RX (wideband) Please read cautions and warnings and important notes at the end of this document. 9 June 06, 2008 SAW Components SAW Duplexer Data Sheet Return Loss S11 TX- port S22 ANT-port S33 RX-port B7680 1732.5 / 2132.5 MHz Please read cautions and warnings and important notes at the end of this document. 10 June 06, 2008 SAW Components SAW Duplexer Data Sheet B7680 1732.5 / 2132.5 MHz References Type Ordering code Marking and package Packaging Date codes B7680 B39212B7680A710 C61157-A3-A41 F61074-V8211-Z000 L_1126 B7680_NB.s4p S-parameters B7680_WB.s4p See file header for pin / port assignements. Soldering profile RoHS compatible S_6001 defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY © EPCOS AG 2008. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 11 June 06, 2008 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 2. 3. 4. 5. 6. 7. 12 June 06, 2008