B78148S1104J000

Chokes and inductors For high frequency and EMC RF chokes, BC series Series/Type: B78108S / B78148S November 2005 7f…fÁRspp… Date: © EPCOS AG 2005. Reproduction, publication and dissemination of this document and the information contained therein without EPCOS’ prior express consent is prohibited. RF chokes BC series BC chokes (Bobbin Core) Rated current 55 to 1200 mA Rated inductance 1 to 4700 NH Construction ■ Ferrite drum core ■ Winding: enamel copper wire ■ Flame-retardant lacquer coating B78108S B78148S Features ■ ■ ■ ■ Wide inductance range Suitable for general-purpose application Special versions available RoHS-compatible (see page 6) Applications ■ RF blocking and filtering ■ Decoupling and interference suppression ■ For antenna systems, automotive electronics, energy-saving lamps, entertainment electronics Terminals ■ Central axial leads, lead-free tinned ■ Radially bent to 5 mm lead spacing Marking Inductance indicated by color bands to IEC 60062 Delivery mode Taped, Ammo and reel packing (see page 8) Dimensional drawings B78108S (axial leads, taped) 65±1 53 ø0.8 max. ø4 max. B78148S (central radial leads, taped) 9.2 max. (IEC 60294) 6±0.5 5±0.25 5±0.25 16 3.5 min. 11.5 max. lacquered/lackiert 5 12,7 IND0121-U IND0429-B Minimum lead spacing 12.5 mm Approx. weight 0.38 g Please read the I mportant notes at the end of this document. Schematic drawing (details page 8) 2 11/05 14 RF chokes BC series Characteristics and ordering codes For further technical data see page 6. LR μH 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 Tolerance1) ± 10 % ^K Qmin 55 55 55 55 55 60 60 60 60 60 65 65 70 70 60 60 55 55 55 50 fQ MHz 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 IR mA 1200 1150 1100 1030 1000 940 900 850 820 780 670 690 680 650 610 580 560 530 500 470 Rmax Ω 0.16 0.18 0.20 0.22 0.25 0.26 0.29 0.31 0.34 0.38 0.51 0.48 0.49 0.55 0.60 0.67 0.74 0.83 0.92 1.02 fres, min MHz 205 185 165 155 140 125 115 105 95 85 75 50 35 30 20 17 13 10 9.0 8.0 B78108S B78148S Ordering code 2) (reel packing) 3) B781*8S1102K000 B781*8S1122K000 B781*8S1152K000 B781*8S1182K000 B781*8S1222K000 B781*8S1272K000 B781*8S1332K000 B781*8S1392K000 B781*8S1472K000 B781*8S1562K000 B781*8S1682K000 B781*8S1822K000 B781*8S1103K000 B781*8S1123K000 B781*8S1153K000 B781*8S1183K000 B781*8S1223K000 B781*8S1273K000 B781*8S1333K000 B781*8S1393K000 1) Closer tolerances upon request. 2) Replace the asterisk * by code number »0« for axial taping or by »4« for radial taping. 3) For Ammo pack the last digit has to be a »9«. Example: B78108S1102K009 Please read the I mportant notes at the end of this document. 3 11/05 RF chokes BC series Characteristics and ordering codes (continued) For further technical data see page 6. LR μH 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 Tolerance1) ±5% ^J Qmin 45 40 40 35 70 70 70 70 70 70 70 70 70 60 55 50 50 50 50 50 40 40 40 40 35 fQ MHz 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 IR mA 450 430 410 390 370 300 280 270 250 200 190 180 170 160 150 140 130 115 100 95 80 75 62 59 55 Rmax Ω 1.10 1.23 1.35 1.54 1.70 2.40 2.80 3.00 3.30 5.70 6.40 7.00 7.90 8.80 10.0 12.0 14.0 17.5 23.0 26.0 34.7 40.0 59.5 66.0 78.0 fres, min MHz 7.5 7.0 6.5 6.0 5.0 4.5 4.2 3.9 3.7 2.8 2.7 2.4 2.2 2.0 1.9 1.6 1.6 1.3 1.25 1.2 1.1 1.0 0.9 0.8 0.7 B78108S B78148S Ordering code 2) (reel packing) 3) B781*8S1473J000 B781*8S1563J000 B781*8S1683J000 B781*8S1823J000 B781*8S1104J000 B781*8S1124J000 B781*8S1154J000 B781*8S1184J000 B781*8S1224J000 B781*8S1274J000 B781*8S1334J000 B781*8S1394J000 B781*8S1474J000 B781*8S1564J000 B781*8S1684J000 B781*8S1824J000 B781*8S1105J000 B781*8S1125J000 B781*8S1155J000 B781*8S1185J000 B781*8S1225J000 B781*8S1275J000 B781*8S1335J000 B781*8S1395J000 B781*8S1475J000 1) Closer tolerances upon request. 2) Replace the asterisk * by code number »0« for axial taping or by »4« for radial taping. 3) For Ammo pack the last digit has to be a »9«. Example: B78108S1473J009 Please read the I mportant notes at the end of this document. 4 11/05 RF chokes BC series Impedance |Z | versus frequency f measured with impedance analyzer HP 4191A / HP 4194A 10 6 Ω | Z| 10 5 IND0122-K B78108S B78148S Inductance L versus DC load current IDC measured with LCR meter HP 4275A 10 4 µH L 10 3 1000 µH 4700 µH IND0123-X B781*8S B781*8S 10 4 10 2 10 3 100 µH 10 µH 10 1 10 2 1 µH 10 µH 100 µH 1000 µH 4700 µH 10 6 10 7 10 8 Hz 10 9 f 1 µH 10 0 10 1 10 0 5 10 10 _1 10 _2 10 _1 10 0 A 10 1 I DC Q factor versus frequency f measured with impedance analyzer HP 4194A 150 B781*8S Q IND0124-C Current derating Iop/IR versus ambient temperature TA (rated temperature TR = 40 °C) 1.2 IND0552-S-E I op IR 1.0 100 1 µH 10 µH 100 µH 1000 µH 4700 µH 50 0.8 0.6 0.4 0.2 04 10 0 10 5 10 6 10 7 Hz 10 8 f 0 20 40 60 80 100 ˚C 140 TA Please read the I mportant notes at the end of this document. 5 11/05 RF chokes BC series General technical data Rated inductance LR B78108S B78148S Measuring frequency: L ≤ 10 μH = 1 MHz 10 μH < L ≤ 4700 μH = 100 kHz L > 4700 μH = 10 kHz Measuring current: ≤ 1 mA Distance between measuring clamps: 25.4 mm Measured with HP 4342A Maximum permissible DC current referred to 40 °C ambient temperature, for derating see below ≤10% (referred to initial value) at IR at 20 °C ambient temperature Measured at 20 °C ambient temperature, distance between measuring clamps: 25.4 mm Measured with Scalar Network Analyzer ZAS from Rohde & Schwarz 55/125/56 (–55 °C/+125 °C/56 days damp heat test) to IEC 60068-1 235 °C, 2 s, ≥90% wetting to IEC 60068-2–20, test Ta To IEC 60068-2-20, test Tb 260 °C, 10 s To IEC 60068-2-21, test Ua ≥20 N RoHS-compatible is defined as compatible with the following documents: DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 13 February 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment COM (2004) 606 final Proposal for a COUNCIL DECISION amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment. When bending the leads, take care that the start-of-winding areas at the face ends (protected by glue and lacquer) are not subjected to any mechanical stress. Q factor Qmin Rated current IR Inductance decrease ΔL/L0 DC resistance Rmax Resonance frequency fres, min Climatic category Solderability Resistance to soldering heat Tensile strength of leads RoHS-compatible Mounting information Please read the I mportant notes at the end of this document. 6 11/05 RF chokes BC series Color coding of the inductance value B78108S B78148S The inductance value and tolerance are encoded by means of colored bands in accordance with IEC 60062. The basic unit is μH. 1st band 2nd band 3rd band 4th band 1st digit of inductance value 2nd digit of inductance value multiplier, i.e. the power of ten, by which the first two digits have to be multiplied. tolerance of the inductance value. Color code Colorless Silver Gold Black Brown Red Orange Yellow Green Blue Violet Grey White Examples: 1st band = 1st digit — — — — 1 2 3 4 5 6 7 8 9 2nd band = 2nd digit — — — 0 1 2 3 4 5 6 7 8 9 3rd band = multiplier — × 10-2 μH = × 10-1 μH = × 100 μH = × 101 μH = × 102 μH = × 103 μH = 0.01 μH 0.1 μH 1,01 μH 10,01 μH 100,01 μH 1000,01 μH 4th band = tolerance ± 20 % (M) ± 10 % (K) ± 5 % (J) — ± 2 % (G) × 104 μH = 10000,01 μH × 105 μH = 100000,01 μH Special designs manufactured to customer specifications are identified by a white tolerance band. 1st band Yellow 4 Brown 1 2nd band Violet 7 Green 5 3rd band 4th band Decoding = 47 × 0.1 μH ± 10 % = 4.7 μH ± 10 % Gold Silver × 0.1 μH ± 10 % Red Gold × 100,0 μH ± 5 % = 15 × 100,0 μH ± 5 % = 1500,0 μH ± 5 % Please read the I mportant notes at the end of this document. 7 11/05 RF chokes BC series Taping and packing Axially taped (to IEC 60286-1) 65±1 53 ø0.8 max. ø4 max. B78108S B78148S 9.2 max. (IEC 60294) 6±0.5 5±0.25 5±0.25 IND0429-B 3.5 min. 11.5 max. lacquered/lackiert Radially taped (to IEC 60286-2) ø4 max. 1.3 max. 2 max. 2 max. 0.8 max. 1.3 max. insulated isoliert 9.2 max. (IEC 60294) 0.5 max. 11.5 max. lacquered/lackiert _ 0.5 18 +1 6 min. 3.8±0.7 12.7±0.3 _ 0.1 5 +0.6 0.7±0.2 _ 0.5 9 +0.75 ø4±0.2 16±0.5 IND0446-L Please read the I mportant notes at the end of this document. 8 11/05 30.5 max. RF chokes BC series Reel packing B78108S B78148S ø30.5±0.15 30 ø360 _ 1 30 ø82+1 ø90 30 Axial n w Label Etikett IND0452-V Radial 42 +1 54 max. n (mm) w (mm) 72 +1 84 max. Ammo pack H Axial L (mm) L Radial 50 max. 265 max. 340 max. 75 max. 125 max. 210 max. B (mm) H (mm SSB1858-W B Packing units Reel packing pcs./reel Axial Radial 5000 2000 Ammo pack pcs./pcs. 2500 2500 Please read the I mportant notes at the end of this document. 9 11/05 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SilverCap, SIFI, SIMID, SIKOREL, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 10 11/05