Power line chokes
Current-compensated D core double chokes
250 V AC, 3.3 … 68 mH, 0.7 … 4.6 A, +40 °C / +60 °C
Series/Type:
B82734R/W
Date:
December 2016
a~í~=pÜÉÉí
¤EPCOS AG 2016. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS’ prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Power line chokes
B82734R/W
Current-compensated D core double chokes
Rated voltage 250 V AC
Rated inductance 3.3 ... 68 mH
Rated current 0.7 ... 4.6 A / +40 °C, +60 °C
Construction
■ Current-compensated double choke
■ Closed rectangular ferrite core
■ Closed plastic coil former (UL 94 V-0)1)
■ Without encapsulation
■ 2-section winding
■ Clearance and creepage distances t 3 mm
B82734R
Features
■ High resonance frequency due to 2-section winding
■ Approx. 0.55% stray inductance for symmetrical interference suppression
■ Low leakage due to closed core shape
■ High pulse strength
■ Low whirring noise
■ Suitable for wave soldering
■ Design complies with EN 60938-2 (VDE 0565-2) and UL 1283
■ UL2) and ENEC (VDE) approvals
■ Recyclable owing to omission of encapsulation and glue
■ RoHS-compatible
B82734W
Applications
■ Suppression of common-mode interferences
■ Switch-mode power applications
■ Electronic ballasts in lamps
Terminals
■ Base material CuNi18Zn20
■ Layer composition Ni, Sn
■ Hot-dipped
■ Pins 0.7 u 0.7 (mm)
■ Lead spacing 15 u 12.5 (mm)
Marking
Manufacturer, rated inductance, rated current,
ordering code, approval symbols, date of manufacture (WWYY)
Delivery mode
Blister tray in cardboard box
1) Additionally certified values:
Glow wire flammability index (GWFI to IEC 60695-2-12):
Glow wire ignition temperature (GWIT to IEC 60695-2-13):
Glow wire test (GWT to IEC 60695-2-11):
Comparative tracking index (CTI to IEC 60112):
Ball pressure test (BP to IEC 60695-10-2):
2) UL approval with 300 V AC.
Please read Cautions and warnings and
Important notes at the end of this document.
2
+850 °C
+775 °C
+750 °C, 2 s / 850 °C, 30 s
175 V
+125 °C
12/16
Power line chokes
B82734R/W
Current-compensated D core double chokes
Dimensional drawings and pin configurations
Vertical version (B82734R)
Horizontal version (B82734W)
Please read Cautions and warnings and
Important notes at the end of this document.
3
12/16
Power line chokes
B82734R/W
Current-compensated D core double chokes
Technical data and measuring conditions
Rated voltage VR
250 V AC (50/60 Hz)
Test voltage Vtest
1500 V AC, 2 s (line/line)
Rated temperature TR
+40 qC / +60 °C
Rated current IR
Referred to 50 Hz and rated temperature
Rated inductance LR
Measured with Agilent 4284A at 10 kHz, 0.1 mA, +20 °C
Inductance is specified per winding.
Inductance tolerance
–30%/+50% at +20°C
Inductance decrease'L/L0
< 10% at DC magnetic bias with IR, +20 °C
Stray inductance Lstray,typ
Measured with Agilent 4284A at 10 kHz, 5 mA, +20 °C, typ. values
DC resistance Rtyp
Measured at +20 °C, typical values, specified per winding
Solderability (lead-free)
Sn96.5Ag3.0Cu0.5: +(245 r3) °C, (3 r0.3) s
Wetting of soldering area t95%
(to IEC 60068-2-20, test Ta)
Resistance to soldering heat
(wave soldering)
+(260 r5) °C, (10 r1) s
(to IEC 60068-2-20, test Tb)
Climatic category
40/125/56 (to IEC 60068-1)
Storage conditions (packaged) –25 °C … +40 °C, d75% RH
Weight
Approx. 30 g
Approvals
IEC / EN 60938-2, UL 1283 (E70122)
Characteristics and ordering codes
IR
LR
Lstray,typ Rtyp
TR
A
mH
PH
m:
0.7
68
410
1.3
47
1.4
Approvals
°C
Ordering code
Vertical version
Horizontal version
1450
+60
B82734R2701B030
B82734W2701B030 u
u
250
560
+40
B82734R2132B030
B82734W2132B030 u
u
39
210
460
+40
B82734R2142B030
B82734W2142B030 u
u
1.7
27
140
320
+40
B82734R2172B030
B82734W2172B030 u
u
2.0
20
105
240
+40
B82734R2202B030
B82734W2202B030 u
u
2.3
15
80
185
+40
B82734R2232B030
B82734W2232B030 u
u
2.6
10
53
130
+40
B82734R2262B030
B82734W2262B030 u
u
3.2
6.8
35
85
+40
B82734R2322B030
B82734W2322B030 u
u
4.6
3.3
17
46
+40
B82734R2462B030
B82734W2462B030 u
u
u = approval granted
Please read Cautions and warnings and
Important notes at the end of this document.
4
12/16
Power line chokes
B82734R/W
Current-compensated D core double chokes
Current derating Iop/IR
versus ambient temperature TA
Impedance |Z| versus frequency f
measured with windings in parallel at +20 °C
typical values
Please read Cautions and warnings and
Important notes at the end of this document.
5
12/16
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,
which might lead to reduced reliability or lifetime.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Display of ordering codes for EPCOS products
The ordering code for one and the same product can be represented differently in data sheets,
data books, other publications and the website of EPCOS, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying representations of the
ordering codes are due to different processes employed and do not affect the
specifications of the respective products. Detailed information can be found on the Internet
under www.epcos.com/orderingcodes.
Please read Cautions and warnings and
Important notes at the end of this document.
6
12/16
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for certain areas
of application. These statements are based on our knowledge of typical requirements that are often placed
on our products in the areas of application concerned. We nevertheless expressly point out that such
statements cannot be regarded as binding statements about the suitability of our products for a
particular customer application. As a rule we are either unfamiliar with individual customer applications or
less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent
on the customer to check and decide whether a product with the properties described in the product
specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure before
the end of their usual service life cannot be completely ruled out in the current state of the art, even
if they are operated as specified. In customer applications requiring a very high level of operational safety
and especially in customer applications in which the malfunction or failure of an electronic component could
endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be
ensured by means of suitable design of the customer application or other action taken by the customer (e.g.
installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this publication
may contain substances subject to restrictions in certain jurisdictions (e.g. because they are
classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet
(www.tdk-electronics.tdk.com/material). Should you have any more detailed questions, please contact our
sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this publication
may change from time to time. The same is true of the corresponding product specifications. Please
check therefore to what extent product descriptions and specifications contained in this publication are still
applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The aforementioned
does not apply in the case of individual agreements deviating from the foregoing for customer-specific
products.
6. Unless otherwise agreed in individual contracts, all orders are subject to our General Terms and
Conditions of Supply.
7. Our manufacturing sites serving the automotive business apply the IATF 16949 standard. The IATF
certifications confirm our compliance with requirements regarding the quality management system in the
automotive industry. Referring to customer requirements and customer specific requirements (“CSR”) TDK
always has and will continue to have the policy of respecting individual agreements. Even if IATF 16949
may appear to support the acceptance of unilateral requirements, we hereby like to emphasize that only
requirements mutually agreed upon can and will be implemented in our Quality Management
System. For clarification purposes we like to point out that obligations from IATF 16949 shall only become
legally binding if individually agreed upon.
8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS,
DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap,
PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse, WindCap are trademarks registered
or pending in Europe and in other countries. Further information will be found on the Internet at www.tdkelectronics.tdk.com/trademarks.
Release 2018-10
7
12/16