ELJ-460-628

Jumbo-LED 16.11.2007 Radiation Light Blue Type 3.5 W Technology InGaN/Al2O3 ELJ-460-628 rev. 04 Case Plastic lens, metal case Description High-power light-blue LED in an aluminium case with thread socket, for easy handling and heat sink mounting Ø12,5 Ø16 Ø11 Ø1,7 5,08 4,5 1,5 Outline: H = 12.4 mm (± 0.5) 2 Applications Illumination, remote control and optical communications, light barriers, measurement systems 7,9 D = 16.0 mm (± 0.5) Thread M10 1 2 13 8 Pin 1 – cathode Pin 2 – anode M10 Absolute Maximum Ratings at Tamb = 25°C, on heat sink (S ≥ 200 cm²), unless otherwise specified Parameter DC forward current Peak forward current Power dissipation Operating temperature range Storage temperature range Junction temperature Test сonditions on heat sink tp≤10 µs, f≤500 Hz on heat sink on heat sink on heat sink on heat sink Symbol IF IFM P Tamb Tstg Tj Value 800 1,2 3,5 -25 to +100 -25 to +100 100 Unit mA A W °C °C °C Tamb = 25°C, unless otherwise specified Parameter Forward voltage Forward voltage* Switching time Reverse voltage Test conditions IF = 350 mA IF = 500 mA IF = 350 mA IR = 10 µA Symbol VF VF tr , t f VR RthJC 5 10 K/W Min Typ 3.4 3.5 80 Max 3.9 Unit V V ns Electrical Characteristics Thermal resistance junction-case *only recommended on optimal heat sink We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 1 of 4 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 Jumbo-LED 16.11.2007 ELJ-460-628 rev. 04 Optical Characteristics at Tamb = 25°C, on heat sink (S ≥ 200 cm²), unless otherwise specified Test Symbol Min Parameter conditions Radiant power Radiant power* Radiant intensity Radiant intensity* Luminous intensity Luminous intensity* Peak wavelength Spectral bandwidth at 50% Viewing angle IF = 350 mA IF = 500 mA IF = 350 mA IF = 500 mA IF = 350 mA IF = 500 mA IF = 350 mA IF = 350 mA IF = 350 mA Φe Φe Ιe Ιe Ιv Ιv λp ∆λ0.5 ϕ 10 450 Typ 100 140 1020 1300 100 130 460 25 15 470 Max Unit mW mW mW/sr mW/sr cd cd nm nm deg *only recommended on optimal heat sink Note: All measurements carried out with EPIGAP equipment, on blank aluminium heat sink, S = 180 cm², passive cooling. Measurement results and curve characteristics obtained with other heat sinks may differ. 1,0 Spectral power distribution (typical) at IF = 350 mA 0,8 rel. Intensity (arb. units) 0,6 0,4 0,2 0,0 360 400 440 480 520 560 600 Wavelength (nm) We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 2 of 4 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 Jumbo-LED 16.11.2007 Ambient Temperature vs. maximal forward current 1000 ELJ-460-628 rev. 04 800 Max. forward current (mA) Max. forward current (A) 600 400 200 0 0 20 40 60 80 100 120 Ambient Temperature (°C) Remarks concerning optical radiation safety* For low forward current (