ELJ-465-617

Jumbo-LED 16.11.2007 Radiation Blue Type 3W Technology InGaN/Al2O3 ELJ-465-617 rev. 04 Case Plastic lens, metal case Description High-power blue LED in an aluminium case with thread socket, for easy handling and heat sink mounting Ø12,5 Ø16 Ø11 Ø1,7 5,08 4,5 1,5 Outline: H = 12.4 mm (± 0.5) 2 Applications Illumination, sensors and optical communications, medical appliances, measurement systems 7,9 D = 16 mm (± 0.5) Thread M10 1 2 13 8 Pin 1 – cathode Pin 2 – anode M10 Absolute Maximum Ratings at Tamb = 25°C, on heat sink (S ≥ 200 cm²), unless otherwise specified Parameter DC forward current Peak forward current Power dissipation Operating temperature range Storage temperature range Junction temperature Test сonditions on heat sink tp≤10 µs, f≤500 Hz on heat sink on heat sink on heat sink on heat sink Symbol IF IFM P Tamb Tstg Tj Value 0.7 1.0 2,8 -25 to +100 -25 to +100 100 Unit A A W °C °C °C Electrical Characteristics Tamb = 25°C, unless otherwise specified Parameter Forward voltage Forward voltage* Switching time Reverse voltage Test conditions IF = 350 mA IF = 700 mA IF = 350 mA IR = 10 µA Symbol VF VF tr , t f VR RthJC 5 10 K/W Min Typ 3.0 3.9 20/25 Max 3.8 Unit V V ns Thermal resistance junction-case *only recommended on optimal heat sink We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 1 of 5 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 Jumbo-LED 16.11.2007 ELJ-465-617 rev. 04 Optical Characteristics at Tamb = 25°C, on heat sink (S ≥ 200 cm²), unless otherwise specified Test Symbol Min Parameter conditions Radiant power Radiant power* Radiant intensity Radiant intensity* Luminous intensity Luminous intensity* Peak wavelength Dominant wavelength* Spectral bandwidth at 50% Viewing angle IF = 350 mA IF = 700 mA IF = 350 mA IF = 700 mA IF = 350 mA IF = 700 mA IF = 350 mA IF = 350 mA IF = 350 mA IF = 100 mA Φe Φe Ιe Ιe Ιv Ιv λp λp ∆λ0.5 ϕ 455 50 770 50 Typ 65 105 1000 1620 70 110 465 467 28 12 475 Max Unit mW mW mW/sr mW/sr cd cd nm nm nm deg *only recommended on optimal heat sink Note: All measurements carried out with EPIGAP equipment, on blank aluminium heat sink, S = 180 cm², passive cooling. Measurement results and curve characteristics obtained with other heat sinks may differ. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 2 of 5 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 Jumbo-LED 16.11.2007 ELJ-465-617 rev. 04 We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 3 of 5 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 Jumbo-LED 16.11.2007 ELJ-465-617 rev. 04 Remarks concerning optical radiation safety* For low forward current (