0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
S5U13T04P00C100

S5U13T04P00C100

  • 厂商:

    EPSONTOYOCOM(爱普生)

  • 封装:

    -

  • 描述:

    EVALBOARDFORS1D13T04

  • 数据手册
  • 价格&库存
S5U13T04P00C100 数据手册
S5U13T04P00C100 Evaluation Board User Manual Document Number: XA3A-G-001-00 SEIKO EPSON CORPORATION Rev. 1.0 Page 2 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for use for engineering evaluation, demonstration, or development purposes only. Do not use it for other purpose. It is not intended to meet the requirement of design for finished product. 2. This evaluation board/kit or development tool is intended for use by an electronics engineer, and it is not a consumer product. The user should use these goods properly and safely. Seiko Epson dose not assume any responsibility and liability of any kind of damage and/or fire caused by usage of it. The user should cease to use it when any abnormal issue occurs, even during proper and safe use. 3. The parts used for this evaluation board/kit or development tool may change without notice. NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of Economy, Trade and Industry or other approval from another government agency. All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies. ©SEIKO EPSON CORPORATION 2013, All rights reserved. S5U13T04P00C100 Evaluation Board User Manual Revision 1.0 XA3A-G-001-00 Issue Date: 2013/03/15 Seiko Epson Corporation Page 3 Table of Contents 1 Introduction ......................................................................................................................... 4 2 Features ............................................................................................................................. 5 3 Setup and Configuration ..................................................................................................... 6 4 Connectors ......................................................................................................................... 7 4.1 J1 Panel Interface Connector ................................................................................................... 8 4.2 J2 Power Connector ................................................................................................................. 8 4.3 J3 Host Interface Connector ..................................................................................................... 9 4.4 J4 Production Test Connector .................................................................................................. 9 5 Parts List ............................................................................................................................10 6 Schematic Diagram ............................................................................................................11 7 References ........................................................................................................................13 8 Change Record ..................................................................................................................14 XA3A-G-001-00 Issue Date: 2013/03/15 S5U13T04P00C100 Evaluation Board User Manual Revision 1.0 Seiko Epson Corporation Page 4 1 Introduction This manual describes the setup and operation of the S5U13T04P00C100 reference board. This reference board is designed as an evaluation platform for the S1D13T04 EPD Timing Controller. The S5U13T04P00C100 reference board has a host interface connector, EPD panel connector, and a 2.0 inch EPD panel. This user manual is updated as appropriate. Please check the Seiko Epson Website at http://www.epson.jp/device/semicon_e/product/lcd_controllers/index.htm for the latest revision of this document before beginning any development. We appreciate your comments on our documentation. Please contact us via email at documentation@erd.epson.com. S5U13T04P00C100 Evaluation Board User Manual Revision 1.0 XA3A-G-001-00 Issue Date: 2013/03/15 Seiko Epson Corporation Page 5 2 Features The S5U13T04P00C100 reference board includes the following features: • Supports SPI host interface • Epson’s S1D13T04 EPD Timing Controller. • Power connector • Panel Interface connector. • 2.0 inch EPD panel. XA3A-G-001-00 Issue Date: 2013/03/15 S5U13T04P00C100 Evaluation Board User Manual Revision 1.0 Seiko Epson Corporation Page 6 3 Setup and Configuration The main functional blocks of the evaluation board are shown below. SVT13T04 board Reserved For Testing J3 J4 J1 U1 Host I/F Panel I/F S1D13T04 HVDD Power 2.0 Inch EPD Panel JP2 Q1 CNF0 JP3/JP4 RVDD J2 JP1 Figure 3-1 S5U13T04P00C100 Reference Board Block Diagram CNF0 is configured with jumpers JP3 and JP4 as shown in the following table. Table 3-1 CNF0 Configuration Selection CNF0 JP3 JP4 Comments 0 Open Short H_RDY signal is all ways driven (Default) 1 Short Open H_RDY signal is open drain signal S5U13T04P00C100 Evaluation Board User Manual Revision 1.0 XA3A-G-001-00 Issue Date: 2013/03/15 Seiko Epson Corporation Page 7 4 Connectors The S5U13T04P00C100 reference board has four connectors for Host Interface, Panel Interface, Power and Reserved for Production Test (J1, J2, J3 and J4). The location of these connectors is shown in the following figure. J1 J4 J2 J3 Figure 4-1 S5U13T04P00C100 Reference Board Top View / Connector Locations Figure 4-2 S5U13T04P00C100 Reference Board Bottom View XA3A-G-001-00 Issue Date: 2013/03/15 S5U13T04P00C100 Evaluation Board User Manual Revision 1.0 Seiko Epson Corporation Page 8 4.1 J1 Panel Interface Connector The panel interface pins of the S1D13T04 are connected through J2. Table 4-1 J1 Panel Interface Connector Connector : J1 Manufacture : HIROSE FH12S-40S-0.5SH 40pin Pin No. Signal Name Description Pin No. Signal Name Description Charge Pump Capacitor 1 CSB EPD Chip Select 21 C15P 2 BUSY EPD BUSY 22 C14M 3 ID Set ID to 0 23 C14P 4 SCLK Serial Clock 24 C13M 5 SI Serial data output 25 C13P 6 SO Serial data input 26 C12M 7 RESETB EPD Reset 27 C12P 8 ADC_IN N.C. 28 C11M 9 VCL EPD VCL Capacitor 29 C11P Charge Pump Capacitor 10 C42P VCOM_DRIVER VCOM from Driver IC 11 C42M Charge Pump Capacitor 30 31 VCC +3.3V for analog 12 C41P VDD +3.3V for digital C41M Charge Pump Capacitor 32 13 33 GND Ground 14 C31P VGH EPD VGH C31M Charge Pump Capacitor 34 15 35 VGL EPD VGL 16 C21P 36 VDH EPD VDH 17 C21M Charge Pump Capacitor 37 VDL EPD VDL 18 C16P BORDER EPD BORDER 19 C16M Charge Pump Capacitor 38 39 VST EPD VST 20 C15M 40 VCOM_PANEL EPD VCOM 4.2 Charge Pump Capacitor Charge Pump Capacitor Charge Pump Capacitor Charge Pump Capacitor J2 Power Connector Power for the S5U13T04P00C100 Evaluation Board is supplied through J2. Table 4-2 J2 Panel Interface Connector Pin No. Signal Name Description 1 VCC Power supply +3.0V 2 GND Ground S5U13T04P00C100 Evaluation Board User Manual Revision 1.0 XA3A-G-001-00 Issue Date: 2013/03/15 Seiko Epson Corporation Page 9 4.3 J3 Host Interface Connector The host interface pins of the S1D13T04 are connected through J3. Table 4-3 J3 Host Interface Connector Pin No. Signal Name Direction 1 GND Power 2 H-MOSI Input SPI interface master to slave data 3 H-MISO Output SPI interface slave to master data 4 H-SCLK Input 4.4 5 H-SS Input 6 H-RDY Output 7 H-WAKEUP Input 8 H-STAT Output 9 H-RESET Input 10 GND Power Description Ground SPI interface serialize clock SPI interface slave select signal 0 = S1D13T04 is busy 1 = S1D13T04 is ready 0 = Puts the S1D13T04 in sleep mode 1 = Puts the S1D13T04 in run mode 0 = S1D13T04 is in sleep mode 1 = S1D13T04 is in run mode 0 = Reset is active 1 = Reset is inactive Ground J4 Production Test Connector J4 is reserved for Production Testing and should not be used. XA3A-G-001-00 Issue Date: 2013/03/15 S5U13T04P00C100 Evaluation Board User Manual Revision 1.0 Seiko Epson Corporation Page 10 5 Parts List Table 5-1 S5U13T04P00C100 Bill of Materials Item Quantity Reference Part Manufacture 1 1 D1 BAT54SW NXP 2 1 J1 FH12S-40S-0.5SH(55) HIROSE 3 2 Q3,Q2 2N7002 NXP 4 1 Q1 ZXMP6A13FTA DIODES Inc. 5 1 U2 SN74LVC1G08IDCKR Texas Instruments 6 1 U1 S1D13T04 EPSON P-TQFP064-1010-0.50 7 2 C11,C32 GRM21BB31A106KE18L MURATA 2012 10uF ±10% DC10V 8 11 C1,C2,C3,C4,C6, C7,C8,C9,C10, C12,C30 GRM155B11A104K MURATA 1005 0.1uF ±10% DC16V 9 1 C5 GRM21BB31E475KAL75L MURATA 2012 4.7uF ±10% DC25V 10 1 C31 GRM188B11E104KA01 MURATA 1608 0.1uF ±10% DC25V 11 1 C13 GRM21BF61A225KA01 MURATA 2012 2.2uF ±10% DC10V X5R 12 7 C14,C15,C17, C20,C21,C22, C23 GRM188F61C225KE15 MURATA 1608 2.2uF ±10% DC16V X5R 13 2 C27,C28 GRM188F61C225KA12 MURATA 1608 2.2uF ±10% DC25V X5R 14 5 C16,C18,C19, C25,C26 GRM319F61E225KA12 MURATA 3216 2.2uF ±10% DC25V X5R 15 1 C24 GRM155R11C104KA88D MURATA 1005 0.1uF ±10% DC16V 16 1 C29 GRM188R71A105KA61 MURATA 1608 1uF ±10% DC16V 17 3 R1,R7,R8 RK73B1JTTP1002F KOA 1608 10.0K ±5% 0.063W 18 1 R4 RK73B1ETTP202J KOA 1005 2.0K ±5% 0.063W 19 1 R5 RK73B1JTTD333J KOA Nomount (1608 33K ±5% 0.1W) 20 1 JP4 RK73Z1JTTD KOA 1608 0 — 1A 21 1 J2 6-102974-0 TE 2/10 -pin 22 1 J3 6-102974-0 TE 10-pin 23 1 J4 961108-5500-AR-PR 3M 10-pin 24 1 — 2.0inch EPD panel 25 3 JP3,R2,R3 — RK73Z1JTTD KOA Nomount (1608 0 — 1A) 26 1 R6 RK73B1JTTD103J KOA Nomount (1608 10K — 1A) S5U13T04P00C100 Evaluation Board User Manual Revision 1.0 Description XA3A-G-001-00 Issue Date: 2013/03/15 Seiko Epson Corporation XA3A-G-001-00 Issue Date: 2013/03/15 Seiko Epson Corporation A B C D J2 Host I/F Connector J3 Power Connector D13T04 J4 5 M3 (Hole size 3.2mm) Hole center Offset x: 3.0mm / y: 3.0mm 3.54 mm 6.08 mm S1D13T04 Board 81mm 4 4 62mm 13mm Panel Connector 40 1 3 J1 2mm 3 4.5 mm 8.1mm EPD PANEL Module 2 2 Figure 6-1 S5U13T04P00C100 Schematic Diagram (1 of 2) S5U13T04P00C100 Evaluation Board User Manual Revision 1.0 Date: Size A3 Title 57 mm Thursday, March 14, 2013 Document Number 1 Sheet 1 SVT13T04 Board (S5U13T04P00C100) 28.8mm 1 of 1 Rev 1.0 A B C D 6 SVT13T04 Boar d 5 Page 11 Schematic Diagram 1 2 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 TOSHIBA D 5 HVDD 10k R8 LVDD HVDD 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 4 NC PS2MDI VSS PM2SDO PSCLK PRESET LVDD HVDD HS2MDI NC HM2SDO HSCLK NC NC SHTDWN PDISCHRG JP4 0 0 JP3 HVDD C1 S1D13T04 U1 H-SS DST2 DSIO DCLK C2 CNF0 0 1 RSV_H VSS VIN VOUT PPWM HWKUP HSTAT HRDY HVDD NC RSV_L VPP NC RSV_L VSS NC JP4 SHORT OPEN 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 JP3 OPEN SHORT 0.1uF/10V 0.1uF/10V 7pin 23pin 3 0.1uF/10V 45pin C3 VPP 0.1uF/10V 50pin C4 R1 R7 HVDD H-WAKEUP H-STAT H-RDY RESET_T03 10k 10k 0.1uF/10V 8pin C6 H-RESET D-RESET 4.7uF/25V 45pin C5 1 2 3 Y Vcc 2N7002 Q2 2 0.1uF/10V 55pin C9 2N7002 Q3 0.1uF/10V C30 HVDD 0.1uF/16V/X7R C24 4 5 0.1uF/10V 40pin C8 SN74LVC1G08 A B GND U2 0.1uF/10V 21pin C7 D1 R5 RVDD 0.1uF/10V 60pin C10 Date: R4 C29 C28 Monday, March 18, 2013 Document Number 1 Sheet R3 No Mount 0 R2 0 No Mount SVT13T04 Board (S5U13T04P00C100) C27 C26 C25 Size A3 Title C14 2.2uF/16V/Y5V CSB BUSY ID SCLK SI SO RESET 1 C15 2.2uF/16V/Y5V C16 2.2uF/25V/Y5V C17 2.2uF/16V/Y5V C18 2.2uF/25V/Y5V C19 2.2uF/25V/Y5V C20 2.2uF/16V/Y5V C21 2.2uF/16V/Y5V C22 2.2uF/16V/Y5V C23 2.2uF/16V/Y5V C13 2.2uF/10V/Y5V T04 AVDD pas con 2.2uF/25V/Y5V DSIO DST2 1 HVDD 2.2uF/16V/Y5V 2.2uF/25V/Y5V DCLK . SHORT . JP1 D-RESET H-M2SDO H-SCLK H-S2MDI H-M2SDO H-SCLK H-SS H-RDY H-WAKEUP H-STAT H-RESET 10 K R6 2 H-S2MDI 0.1uF/10V 10uF/10V HVDD C12 C11 D HVDD T04 HVDD pas con 2.2uF/16V/Y5V 3M S LVDD T04 LVDD pas con 2 1uF/10V/X7R 961108-5500 J4 C32 C31 +7.0V VPP Q1 SSM3J305T Internal Use Only 6-102974-0 10pin J3 6-102974-0 2/10pin J2 JP2 SHORT S RVDD 3 2k/5% A B C D 1 . G G HVDD 4 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 NC NC NC NC AVDD NC NC NC VSS HVDD CNF0 NC NC NC LVDD RESET_X . 2 0.1uF/25V Seiko Epson Corporation NC NC NC VSS HVDD PCSB LVDD NC PBUSY DST2 DSIO RSV_L DCLK NC HCSB NC S5U13T04P00C100 Evaluation Board User Manual Revision 1.0 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 No Mount 10uF/10V No Mount 33k/5% No Mount 5 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 of 1 HIROSE Rev 1.0 FH12S-40S-0.5SH CSB BUSY ID SCLK SI SO RESETB ADC_IN VCL C42P C42M C41P C41M C31M C31P C21M C21P C16M C16P C15M C15P C14M C14P C13M C13P C12M C12P C11M C11P VCOM_DRIVER VCC VDD GND VGH VGL VDH VDL BORDER VST VCOM_PANEL J1 A B C D Page 12 BAT54SW Figure 6-2 S5U13T04P00C100 Schematic Diagram (2 of 2) XA3A-G-001-00 Issue Date: 2013/03/15 Page 13 7 References Epson Research and Development, Inc., S1D13T04 Hardware Functional Specification, document number XA3A-A-001-xx. XA3A-G-001-00 Issue Date: 2013/03/15 S5U13T04P00C100 Evaluation Board User Manual Revision 1.0 Seiko Epson Corporation Page 14 8 Change Record XA3A-G-001-00 Revision 1.0 - Issued: March 14, 2013 • Release document as rev 1.0 S5U13T04P00C100 Evaluation Board User Manual Revision 1.0 XA3A-G-001-00 Issue Date: 2013/03/15 Seiko Epson Corporation International Sales Operations AMERICA ASIA EPSON ELECTRONICS AMERICA, INC. EPSON (CHINA) CO., LTD. 214 Devcon Drive, San Jose, CA 95112, USA Phone: +1-800-228-3964 7F, Jinbao Bldg., No.89 Jinbao St., Dongcheng District, Beijing 100005, CHINA Phone: +86-10-8522-1199 FAX: +1-408-922-0238 SHANGHAI BRANCH EUROPE EPSON EUROPE ELECTRONICS GmbH Riesstrasse 15, 80992 Munich, GERMANY Phone: +49-89-14005-0 FAX: +86-10-8522-1125 FAX: +49-89-14005-110 7F, Block B, Hi-Tech Bldg., 900 Yishan Road, Shanghai 200233, CHINA Phone: +86-21-5423-5577 FAX: +86-21-5423-4677 SHENZHEN BRANCH 12F, Dawning Mansion, Keji South 12th Road, Hi-Tech Park, Shenzhen 518057, CHINA Phone: +86-755-2699-3828 FAX: +86-755-2699-3838 EPSON HONG KONG LTD. Unit 715-723, 7/F Trade Square, 681 Cheung Sha Wan Road, Kowloon, Hong Kong. Phone: +852-2585-4600 FAX: +852-2827-4346 EPSON TAIWAN TECHNOLOGY & TRADING LTD. 14F, No. 7, Song Ren Road, Taipei 110, TAIWAN Phone: +886-2-8786-6688 FAX: +886-2-8786-6660 EPSON SINGAPORE PTE., LTD. 1 HarbourFront Place, #03-02 HarbourFront Tower One, Singapore 098633 Phone: +65-6586-5500 FAX: +65-6271-3182 SEIKO EPSON CORP. KOREA OFFICE 5F, KLI 63 Bldg., 60 Yoido-dong, Youngdeungpo-Ku, Seoul 150-763, KOREA Phone: +82-2-784-6027 FAX: +82-2-767-3677 SEIKO EPSON CORP. MICRODEVICES OPERATIONS DIVISION IC Sales & Marketing Department 421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN Phone: +81-42-587-5814 FAX: +81-42-587-5117 Document Code: XA3A-G-001-00 First Issue March 2013 Revised October 2012 in JAPAN
S5U13T04P00C100 价格&库存

很抱歉,暂时无法提供与“S5U13T04P00C100”相匹配的价格&库存,您可以联系我们找货

免费人工找货